862 lines
		
	
	
		
			21 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			862 lines
		
	
	
		
			21 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * MFD driver for TWL6040 audio device
 | |
|  *
 | |
|  * Authors:	Misael Lopez Cruz <misael.lopez@ti.com>
 | |
|  *		Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
 | |
|  *		Peter Ujfalusi <peter.ujfalusi@ti.com>
 | |
|  *
 | |
|  * Copyright:	(C) 2011 Texas Instruments, Inc.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful, but
 | |
|  * WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 | |
|  * General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 | |
|  * 02110-1301 USA
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/of_irq.h>
 | |
| #include <linux/of_gpio.h>
 | |
| #include <linux/of_platform.h>
 | |
| #include <linux/gpio.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/mfd/core.h>
 | |
| #include <linux/mfd/twl6040.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| 
 | |
| #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
 | |
| #define TWL6040_NUM_SUPPLIES	(2)
 | |
| 
 | |
| static const struct reg_default twl6040_defaults[] = {
 | |
| 	{ 0x01, 0x4B }, /* REG_ASICID	(ro) */
 | |
| 	{ 0x02, 0x00 }, /* REG_ASICREV	(ro) */
 | |
| 	{ 0x03, 0x00 }, /* REG_INTID	*/
 | |
| 	{ 0x04, 0x00 }, /* REG_INTMR	*/
 | |
| 	{ 0x05, 0x00 }, /* REG_NCPCTRL	*/
 | |
| 	{ 0x06, 0x00 }, /* REG_LDOCTL	*/
 | |
| 	{ 0x07, 0x60 }, /* REG_HPPLLCTL	*/
 | |
| 	{ 0x08, 0x00 }, /* REG_LPPLLCTL	*/
 | |
| 	{ 0x09, 0x4A }, /* REG_LPPLLDIV	*/
 | |
| 	{ 0x0A, 0x00 }, /* REG_AMICBCTL	*/
 | |
| 	{ 0x0B, 0x00 }, /* REG_DMICBCTL	*/
 | |
| 	{ 0x0C, 0x00 }, /* REG_MICLCTL	*/
 | |
| 	{ 0x0D, 0x00 }, /* REG_MICRCTL	*/
 | |
| 	{ 0x0E, 0x00 }, /* REG_MICGAIN	*/
 | |
| 	{ 0x0F, 0x1B }, /* REG_LINEGAIN	*/
 | |
| 	{ 0x10, 0x00 }, /* REG_HSLCTL	*/
 | |
| 	{ 0x11, 0x00 }, /* REG_HSRCTL	*/
 | |
| 	{ 0x12, 0x00 }, /* REG_HSGAIN	*/
 | |
| 	{ 0x13, 0x00 }, /* REG_EARCTL	*/
 | |
| 	{ 0x14, 0x00 }, /* REG_HFLCTL	*/
 | |
| 	{ 0x15, 0x00 }, /* REG_HFLGAIN	*/
 | |
| 	{ 0x16, 0x00 }, /* REG_HFRCTL	*/
 | |
| 	{ 0x17, 0x00 }, /* REG_HFRGAIN	*/
 | |
| 	{ 0x18, 0x00 }, /* REG_VIBCTLL	*/
 | |
| 	{ 0x19, 0x00 }, /* REG_VIBDATL	*/
 | |
| 	{ 0x1A, 0x00 }, /* REG_VIBCTLR	*/
 | |
| 	{ 0x1B, 0x00 }, /* REG_VIBDATR	*/
 | |
| 	{ 0x1C, 0x00 }, /* REG_HKCTL1	*/
 | |
| 	{ 0x1D, 0x00 }, /* REG_HKCTL2	*/
 | |
| 	{ 0x1E, 0x00 }, /* REG_GPOCTL	*/
 | |
| 	{ 0x1F, 0x00 }, /* REG_ALB	*/
 | |
| 	{ 0x20, 0x00 }, /* REG_DLB	*/
 | |
| 	/* 0x28, REG_TRIM1 */
 | |
| 	/* 0x29, REG_TRIM2 */
 | |
| 	/* 0x2A, REG_TRIM3 */
 | |
| 	/* 0x2B, REG_HSOTRIM */
 | |
| 	/* 0x2C, REG_HFOTRIM */
 | |
| 	{ 0x2D, 0x08 }, /* REG_ACCCTL	*/
 | |
| 	{ 0x2E, 0x00 }, /* REG_STATUS	(ro) */
 | |
| };
 | |
| 
 | |
| static struct reg_sequence twl6040_patch[] = {
 | |
| 	/*
 | |
| 	 * Select I2C bus access to dual access registers
 | |
| 	 * Interrupt register is cleared on read
 | |
| 	 * Select fast mode for i2c (400KHz)
 | |
| 	 */
 | |
| 	{ TWL6040_REG_ACCCTL,
 | |
| 		TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) },
 | |
| };
 | |
| 
 | |
| 
 | |
| static bool twl6040_has_vibra(struct device_node *parent)
 | |
| {
 | |
| 	struct device_node *node;
 | |
| 
 | |
| 	node = of_get_child_by_name(parent, "vibra");
 | |
| 	if (node) {
 | |
| 		of_node_put(node);
 | |
| 		return true;
 | |
| 	}
 | |
| 
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
 | |
| {
 | |
| 	int ret;
 | |
| 	unsigned int val;
 | |
| 
 | |
| 	ret = regmap_read(twl6040->regmap, reg, &val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return val;
 | |
| }
 | |
| EXPORT_SYMBOL(twl6040_reg_read);
 | |
| 
 | |
| int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_write(twl6040->regmap, reg, val);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| EXPORT_SYMBOL(twl6040_reg_write);
 | |
| 
 | |
| int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
 | |
| {
 | |
| 	return regmap_update_bits(twl6040->regmap, reg, mask, mask);
 | |
| }
 | |
| EXPORT_SYMBOL(twl6040_set_bits);
 | |
| 
 | |
| int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
 | |
| {
 | |
| 	return regmap_update_bits(twl6040->regmap, reg, mask, 0);
 | |
| }
 | |
| EXPORT_SYMBOL(twl6040_clear_bits);
 | |
| 
 | |
| /* twl6040 codec manual power-up sequence */
 | |
| static int twl6040_power_up_manual(struct twl6040 *twl6040)
 | |
| {
 | |
| 	u8 ldoctl, ncpctl, lppllctl;
 | |
| 	int ret;
 | |
| 
 | |
| 	/* enable high-side LDO, reference system and internal oscillator */
 | |
| 	ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
 | |
| 	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 	usleep_range(10000, 10500);
 | |
| 
 | |
| 	/* enable negative charge pump */
 | |
| 	ncpctl = TWL6040_NCPENA;
 | |
| 	ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
 | |
| 	if (ret)
 | |
| 		goto ncp_err;
 | |
| 	usleep_range(1000, 1500);
 | |
| 
 | |
| 	/* enable low-side LDO */
 | |
| 	ldoctl |= TWL6040_LSLDOENA;
 | |
| 	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 | |
| 	if (ret)
 | |
| 		goto lsldo_err;
 | |
| 	usleep_range(1000, 1500);
 | |
| 
 | |
| 	/* enable low-power PLL */
 | |
| 	lppllctl = TWL6040_LPLLENA;
 | |
| 	ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 | |
| 	if (ret)
 | |
| 		goto lppll_err;
 | |
| 	usleep_range(5000, 5500);
 | |
| 
 | |
| 	/* disable internal oscillator */
 | |
| 	ldoctl &= ~TWL6040_OSCENA;
 | |
| 	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 | |
| 	if (ret)
 | |
| 		goto osc_err;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| osc_err:
 | |
| 	lppllctl &= ~TWL6040_LPLLENA;
 | |
| 	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 | |
| lppll_err:
 | |
| 	ldoctl &= ~TWL6040_LSLDOENA;
 | |
| 	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 | |
| lsldo_err:
 | |
| 	ncpctl &= ~TWL6040_NCPENA;
 | |
| 	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
 | |
| ncp_err:
 | |
| 	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
 | |
| 	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 | |
| 
 | |
| 	dev_err(twl6040->dev, "manual power-up failed\n");
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /* twl6040 manual power-down sequence */
 | |
| static void twl6040_power_down_manual(struct twl6040 *twl6040)
 | |
| {
 | |
| 	u8 ncpctl, ldoctl, lppllctl;
 | |
| 
 | |
| 	ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
 | |
| 	ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
 | |
| 	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
 | |
| 
 | |
| 	/* enable internal oscillator */
 | |
| 	ldoctl |= TWL6040_OSCENA;
 | |
| 	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 | |
| 	usleep_range(1000, 1500);
 | |
| 
 | |
| 	/* disable low-power PLL */
 | |
| 	lppllctl &= ~TWL6040_LPLLENA;
 | |
| 	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 | |
| 
 | |
| 	/* disable low-side LDO */
 | |
| 	ldoctl &= ~TWL6040_LSLDOENA;
 | |
| 	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 | |
| 
 | |
| 	/* disable negative charge pump */
 | |
| 	ncpctl &= ~TWL6040_NCPENA;
 | |
| 	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
 | |
| 
 | |
| 	/* disable high-side LDO, reference system and internal oscillator */
 | |
| 	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
 | |
| 	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 | |
| }
 | |
| 
 | |
| static irqreturn_t twl6040_readyint_handler(int irq, void *data)
 | |
| {
 | |
| 	struct twl6040 *twl6040 = data;
 | |
| 
 | |
| 	complete(&twl6040->ready);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static irqreturn_t twl6040_thint_handler(int irq, void *data)
 | |
| {
 | |
| 	struct twl6040 *twl6040 = data;
 | |
| 	u8 status;
 | |
| 
 | |
| 	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
 | |
| 	if (status & TWL6040_TSHUTDET) {
 | |
| 		dev_warn(twl6040->dev, "Thermal shutdown, powering-off");
 | |
| 		twl6040_power(twl6040, 0);
 | |
| 	} else {
 | |
| 		dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on");
 | |
| 		twl6040_power(twl6040, 1);
 | |
| 	}
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static int twl6040_power_up_automatic(struct twl6040 *twl6040)
 | |
| {
 | |
| 	int time_left;
 | |
| 
 | |
| 	gpio_set_value(twl6040->audpwron, 1);
 | |
| 
 | |
| 	time_left = wait_for_completion_timeout(&twl6040->ready,
 | |
| 						msecs_to_jiffies(144));
 | |
| 	if (!time_left) {
 | |
| 		u8 intid;
 | |
| 
 | |
| 		dev_warn(twl6040->dev, "timeout waiting for READYINT\n");
 | |
| 		intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
 | |
| 		if (!(intid & TWL6040_READYINT)) {
 | |
| 			dev_err(twl6040->dev, "automatic power-up failed\n");
 | |
| 			gpio_set_value(twl6040->audpwron, 0);
 | |
| 			return -ETIMEDOUT;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int twl6040_power(struct twl6040 *twl6040, int on)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	mutex_lock(&twl6040->mutex);
 | |
| 
 | |
| 	if (on) {
 | |
| 		/* already powered-up */
 | |
| 		if (twl6040->power_count++)
 | |
| 			goto out;
 | |
| 
 | |
| 		ret = clk_prepare_enable(twl6040->clk32k);
 | |
| 		if (ret) {
 | |
| 			twl6040->power_count = 0;
 | |
| 			goto out;
 | |
| 		}
 | |
| 
 | |
| 		/* Allow writes to the chip */
 | |
| 		regcache_cache_only(twl6040->regmap, false);
 | |
| 
 | |
| 		if (gpio_is_valid(twl6040->audpwron)) {
 | |
| 			/* use automatic power-up sequence */
 | |
| 			ret = twl6040_power_up_automatic(twl6040);
 | |
| 			if (ret) {
 | |
| 				clk_disable_unprepare(twl6040->clk32k);
 | |
| 				twl6040->power_count = 0;
 | |
| 				goto out;
 | |
| 			}
 | |
| 		} else {
 | |
| 			/* use manual power-up sequence */
 | |
| 			ret = twl6040_power_up_manual(twl6040);
 | |
| 			if (ret) {
 | |
| 				clk_disable_unprepare(twl6040->clk32k);
 | |
| 				twl6040->power_count = 0;
 | |
| 				goto out;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		/*
 | |
| 		 * Register access can produce errors after power-up unless we
 | |
| 		 * wait at least 8ms based on measurements on duovero.
 | |
| 		 */
 | |
| 		usleep_range(10000, 12000);
 | |
| 
 | |
| 		/* Sync with the HW */
 | |
| 		ret = regcache_sync(twl6040->regmap);
 | |
| 		if (ret) {
 | |
| 			dev_err(twl6040->dev, "Failed to sync with the HW: %i\n",
 | |
| 				ret);
 | |
| 			goto out;
 | |
| 		}
 | |
| 
 | |
| 		/* Default PLL configuration after power up */
 | |
| 		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
 | |
| 		twl6040->sysclk_rate = 19200000;
 | |
| 	} else {
 | |
| 		/* already powered-down */
 | |
| 		if (!twl6040->power_count) {
 | |
| 			dev_err(twl6040->dev,
 | |
| 				"device is already powered-off\n");
 | |
| 			ret = -EPERM;
 | |
| 			goto out;
 | |
| 		}
 | |
| 
 | |
| 		if (--twl6040->power_count)
 | |
| 			goto out;
 | |
| 
 | |
| 		if (gpio_is_valid(twl6040->audpwron)) {
 | |
| 			/* use AUDPWRON line */
 | |
| 			gpio_set_value(twl6040->audpwron, 0);
 | |
| 
 | |
| 			/* power-down sequence latency */
 | |
| 			usleep_range(500, 700);
 | |
| 		} else {
 | |
| 			/* use manual power-down sequence */
 | |
| 			twl6040_power_down_manual(twl6040);
 | |
| 		}
 | |
| 
 | |
| 		/* Set regmap to cache only and mark it as dirty */
 | |
| 		regcache_cache_only(twl6040->regmap, true);
 | |
| 		regcache_mark_dirty(twl6040->regmap);
 | |
| 
 | |
| 		twl6040->sysclk_rate = 0;
 | |
| 
 | |
| 		if (twl6040->pll == TWL6040_SYSCLK_SEL_HPPLL) {
 | |
| 			clk_disable_unprepare(twl6040->mclk);
 | |
| 			twl6040->mclk_rate = 0;
 | |
| 		}
 | |
| 
 | |
| 		clk_disable_unprepare(twl6040->clk32k);
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	mutex_unlock(&twl6040->mutex);
 | |
| 	return ret;
 | |
| }
 | |
| EXPORT_SYMBOL(twl6040_power);
 | |
| 
 | |
| int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 | |
| 		    unsigned int freq_in, unsigned int freq_out)
 | |
| {
 | |
| 	u8 hppllctl, lppllctl;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	mutex_lock(&twl6040->mutex);
 | |
| 
 | |
| 	hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
 | |
| 	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
 | |
| 
 | |
| 	/* Force full reconfiguration when switching between PLL */
 | |
| 	if (pll_id != twl6040->pll) {
 | |
| 		twl6040->sysclk_rate = 0;
 | |
| 		twl6040->mclk_rate = 0;
 | |
| 	}
 | |
| 
 | |
| 	switch (pll_id) {
 | |
| 	case TWL6040_SYSCLK_SEL_LPPLL:
 | |
| 		/* low-power PLL divider */
 | |
| 		/* Change the sysclk configuration only if it has been canged */
 | |
| 		if (twl6040->sysclk_rate != freq_out) {
 | |
| 			switch (freq_out) {
 | |
| 			case 17640000:
 | |
| 				lppllctl |= TWL6040_LPLLFIN;
 | |
| 				break;
 | |
| 			case 19200000:
 | |
| 				lppllctl &= ~TWL6040_LPLLFIN;
 | |
| 				break;
 | |
| 			default:
 | |
| 				dev_err(twl6040->dev,
 | |
| 					"freq_out %d not supported\n",
 | |
| 					freq_out);
 | |
| 				ret = -EINVAL;
 | |
| 				goto pll_out;
 | |
| 			}
 | |
| 			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 | |
| 					  lppllctl);
 | |
| 		}
 | |
| 
 | |
| 		/* The PLL in use has not been change, we can exit */
 | |
| 		if (twl6040->pll == pll_id)
 | |
| 			break;
 | |
| 
 | |
| 		switch (freq_in) {
 | |
| 		case 32768:
 | |
| 			lppllctl |= TWL6040_LPLLENA;
 | |
| 			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 | |
| 					  lppllctl);
 | |
| 			mdelay(5);
 | |
| 			lppllctl &= ~TWL6040_HPLLSEL;
 | |
| 			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 | |
| 					  lppllctl);
 | |
| 			hppllctl &= ~TWL6040_HPLLENA;
 | |
| 			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
 | |
| 					  hppllctl);
 | |
| 			break;
 | |
| 		default:
 | |
| 			dev_err(twl6040->dev,
 | |
| 				"freq_in %d not supported\n", freq_in);
 | |
| 			ret = -EINVAL;
 | |
| 			goto pll_out;
 | |
| 		}
 | |
| 
 | |
| 		clk_disable_unprepare(twl6040->mclk);
 | |
| 		break;
 | |
| 	case TWL6040_SYSCLK_SEL_HPPLL:
 | |
| 		/* high-performance PLL can provide only 19.2 MHz */
 | |
| 		if (freq_out != 19200000) {
 | |
| 			dev_err(twl6040->dev,
 | |
| 				"freq_out %d not supported\n", freq_out);
 | |
| 			ret = -EINVAL;
 | |
| 			goto pll_out;
 | |
| 		}
 | |
| 
 | |
| 		if (twl6040->mclk_rate != freq_in) {
 | |
| 			hppllctl &= ~TWL6040_MCLK_MSK;
 | |
| 
 | |
| 			switch (freq_in) {
 | |
| 			case 12000000:
 | |
| 				/* PLL enabled, active mode */
 | |
| 				hppllctl |= TWL6040_MCLK_12000KHZ |
 | |
| 					    TWL6040_HPLLENA;
 | |
| 				break;
 | |
| 			case 19200000:
 | |
| 				/* PLL enabled, bypass mode */
 | |
| 				hppllctl |= TWL6040_MCLK_19200KHZ |
 | |
| 					    TWL6040_HPLLBP | TWL6040_HPLLENA;
 | |
| 				break;
 | |
| 			case 26000000:
 | |
| 				/* PLL enabled, active mode */
 | |
| 				hppllctl |= TWL6040_MCLK_26000KHZ |
 | |
| 					    TWL6040_HPLLENA;
 | |
| 				break;
 | |
| 			case 38400000:
 | |
| 				/* PLL enabled, bypass mode */
 | |
| 				hppllctl |= TWL6040_MCLK_38400KHZ |
 | |
| 					    TWL6040_HPLLBP | TWL6040_HPLLENA;
 | |
| 				break;
 | |
| 			default:
 | |
| 				dev_err(twl6040->dev,
 | |
| 					"freq_in %d not supported\n", freq_in);
 | |
| 				ret = -EINVAL;
 | |
| 				goto pll_out;
 | |
| 			}
 | |
| 
 | |
| 			/* When switching to HPPLL, enable the mclk first */
 | |
| 			if (pll_id != twl6040->pll)
 | |
| 				clk_prepare_enable(twl6040->mclk);
 | |
| 			/*
 | |
| 			 * enable clock slicer to ensure input waveform is
 | |
| 			 * square
 | |
| 			 */
 | |
| 			hppllctl |= TWL6040_HPLLSQRENA;
 | |
| 
 | |
| 			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
 | |
| 					  hppllctl);
 | |
| 			usleep_range(500, 700);
 | |
| 			lppllctl |= TWL6040_HPLLSEL;
 | |
| 			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 | |
| 					  lppllctl);
 | |
| 			lppllctl &= ~TWL6040_LPLLENA;
 | |
| 			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 | |
| 					  lppllctl);
 | |
| 
 | |
| 			twl6040->mclk_rate = freq_in;
 | |
| 		}
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
 | |
| 		ret = -EINVAL;
 | |
| 		goto pll_out;
 | |
| 	}
 | |
| 
 | |
| 	twl6040->sysclk_rate = freq_out;
 | |
| 	twl6040->pll = pll_id;
 | |
| 
 | |
| pll_out:
 | |
| 	mutex_unlock(&twl6040->mutex);
 | |
| 	return ret;
 | |
| }
 | |
| EXPORT_SYMBOL(twl6040_set_pll);
 | |
| 
 | |
| int twl6040_get_pll(struct twl6040 *twl6040)
 | |
| {
 | |
| 	if (twl6040->power_count)
 | |
| 		return twl6040->pll;
 | |
| 	else
 | |
| 		return -ENODEV;
 | |
| }
 | |
| EXPORT_SYMBOL(twl6040_get_pll);
 | |
| 
 | |
| unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
 | |
| {
 | |
| 	return twl6040->sysclk_rate;
 | |
| }
 | |
| EXPORT_SYMBOL(twl6040_get_sysclk);
 | |
| 
 | |
| /* Get the combined status of the vibra control register */
 | |
| int twl6040_get_vibralr_status(struct twl6040 *twl6040)
 | |
| {
 | |
| 	unsigned int reg;
 | |
| 	int ret;
 | |
| 	u8 status;
 | |
| 
 | |
| 	ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLL, ®);
 | |
| 	if (ret != 0)
 | |
| 		return ret;
 | |
| 	status = reg;
 | |
| 
 | |
| 	ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLR, ®);
 | |
| 	if (ret != 0)
 | |
| 		return ret;
 | |
| 	status |= reg;
 | |
| 
 | |
| 	status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| EXPORT_SYMBOL(twl6040_get_vibralr_status);
 | |
| 
 | |
| static struct resource twl6040_vibra_rsrc[] = {
 | |
| 	{
 | |
| 		.flags = IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static struct resource twl6040_codec_rsrc[] = {
 | |
| 	{
 | |
| 		.flags = IORESOURCE_IRQ,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
 | |
| {
 | |
| 	/* Register 0 is not readable */
 | |
| 	if (!reg)
 | |
| 		return false;
 | |
| 	return true;
 | |
| }
 | |
| 
 | |
| static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
 | |
| {
 | |
| 	switch (reg) {
 | |
| 	case TWL6040_REG_ASICID:
 | |
| 	case TWL6040_REG_ASICREV:
 | |
| 	case TWL6040_REG_INTID:
 | |
| 	case TWL6040_REG_LPPLLCTL:
 | |
| 	case TWL6040_REG_HPPLLCTL:
 | |
| 	case TWL6040_REG_STATUS:
 | |
| 		return true;
 | |
| 	default:
 | |
| 		return false;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
 | |
| {
 | |
| 	switch (reg) {
 | |
| 	case TWL6040_REG_ASICID:
 | |
| 	case TWL6040_REG_ASICREV:
 | |
| 	case TWL6040_REG_STATUS:
 | |
| 		return false;
 | |
| 	default:
 | |
| 		return true;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static const struct regmap_config twl6040_regmap_config = {
 | |
| 	.reg_bits = 8,
 | |
| 	.val_bits = 8,
 | |
| 
 | |
| 	.reg_defaults = twl6040_defaults,
 | |
| 	.num_reg_defaults = ARRAY_SIZE(twl6040_defaults),
 | |
| 
 | |
| 	.max_register = TWL6040_REG_STATUS, /* 0x2e */
 | |
| 
 | |
| 	.readable_reg = twl6040_readable_reg,
 | |
| 	.volatile_reg = twl6040_volatile_reg,
 | |
| 	.writeable_reg = twl6040_writeable_reg,
 | |
| 
 | |
| 	.cache_type = REGCACHE_RBTREE,
 | |
| 	.use_single_rw = true,
 | |
| };
 | |
| 
 | |
| static const struct regmap_irq twl6040_irqs[] = {
 | |
| 	{ .reg_offset = 0, .mask = TWL6040_THINT, },
 | |
| 	{ .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, },
 | |
| 	{ .reg_offset = 0, .mask = TWL6040_HOOKINT, },
 | |
| 	{ .reg_offset = 0, .mask = TWL6040_HFINT, },
 | |
| 	{ .reg_offset = 0, .mask = TWL6040_VIBINT, },
 | |
| 	{ .reg_offset = 0, .mask = TWL6040_READYINT, },
 | |
| };
 | |
| 
 | |
| static struct regmap_irq_chip twl6040_irq_chip = {
 | |
| 	.name = "twl6040",
 | |
| 	.irqs = twl6040_irqs,
 | |
| 	.num_irqs = ARRAY_SIZE(twl6040_irqs),
 | |
| 
 | |
| 	.num_regs = 1,
 | |
| 	.status_base = TWL6040_REG_INTID,
 | |
| 	.mask_base = TWL6040_REG_INTMR,
 | |
| };
 | |
| 
 | |
| static int twl6040_probe(struct i2c_client *client,
 | |
| 			 const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct device_node *node = client->dev.of_node;
 | |
| 	struct twl6040 *twl6040;
 | |
| 	struct mfd_cell *cell = NULL;
 | |
| 	int irq, ret, children = 0;
 | |
| 
 | |
| 	if (!node) {
 | |
| 		dev_err(&client->dev, "of node is missing\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* In order to operate correctly we need valid interrupt config */
 | |
| 	if (!client->irq) {
 | |
| 		dev_err(&client->dev, "Invalid IRQ configuration\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
 | |
| 			       GFP_KERNEL);
 | |
| 	if (!twl6040)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config);
 | |
| 	if (IS_ERR(twl6040->regmap))
 | |
| 		return PTR_ERR(twl6040->regmap);
 | |
| 
 | |
| 	i2c_set_clientdata(client, twl6040);
 | |
| 
 | |
| 	twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
 | |
| 	if (IS_ERR(twl6040->clk32k)) {
 | |
| 		if (PTR_ERR(twl6040->clk32k) == -EPROBE_DEFER)
 | |
| 			return -EPROBE_DEFER;
 | |
| 		dev_dbg(&client->dev, "clk32k is not handled\n");
 | |
| 		twl6040->clk32k = NULL;
 | |
| 	}
 | |
| 
 | |
| 	twl6040->mclk = devm_clk_get(&client->dev, "mclk");
 | |
| 	if (IS_ERR(twl6040->mclk)) {
 | |
| 		if (PTR_ERR(twl6040->mclk) == -EPROBE_DEFER)
 | |
| 			return -EPROBE_DEFER;
 | |
| 		dev_dbg(&client->dev, "mclk is not handled\n");
 | |
| 		twl6040->mclk = NULL;
 | |
| 	}
 | |
| 
 | |
| 	twl6040->supplies[0].supply = "vio";
 | |
| 	twl6040->supplies[1].supply = "v2v1";
 | |
| 	ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
 | |
| 				      twl6040->supplies);
 | |
| 	if (ret != 0) {
 | |
| 		dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 | |
| 	if (ret != 0) {
 | |
| 		dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	twl6040->dev = &client->dev;
 | |
| 	twl6040->irq = client->irq;
 | |
| 
 | |
| 	mutex_init(&twl6040->mutex);
 | |
| 	init_completion(&twl6040->ready);
 | |
| 
 | |
| 	regmap_register_patch(twl6040->regmap, twl6040_patch,
 | |
| 			      ARRAY_SIZE(twl6040_patch));
 | |
| 
 | |
| 	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
 | |
| 	if (twl6040->rev < 0) {
 | |
| 		dev_err(&client->dev, "Failed to read revision register: %d\n",
 | |
| 			twl6040->rev);
 | |
| 		ret = twl6040->rev;
 | |
| 		goto gpio_err;
 | |
| 	}
 | |
| 
 | |
| 	/* ERRATA: Automatic power-up is not possible in ES1.0 */
 | |
| 	if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
 | |
| 		twl6040->audpwron = of_get_named_gpio(node,
 | |
| 						      "ti,audpwron-gpio", 0);
 | |
| 	else
 | |
| 		twl6040->audpwron = -EINVAL;
 | |
| 
 | |
| 	if (gpio_is_valid(twl6040->audpwron)) {
 | |
| 		ret = devm_gpio_request_one(&client->dev, twl6040->audpwron,
 | |
| 					    GPIOF_OUT_INIT_LOW, "audpwron");
 | |
| 		if (ret)
 | |
| 			goto gpio_err;
 | |
| 
 | |
| 		/* Clear any pending interrupt */
 | |
| 		twl6040_reg_read(twl6040, TWL6040_REG_INTID);
 | |
| 	}
 | |
| 
 | |
| 	ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
 | |
| 				  0, &twl6040_irq_chip, &twl6040->irq_data);
 | |
| 	if (ret < 0)
 | |
| 		goto gpio_err;
 | |
| 
 | |
| 	twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
 | |
| 						 TWL6040_IRQ_READY);
 | |
| 	twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
 | |
| 					      TWL6040_IRQ_TH);
 | |
| 
 | |
| 	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
 | |
| 					twl6040_readyint_handler, IRQF_ONESHOT,
 | |
| 					"twl6040_irq_ready", twl6040);
 | |
| 	if (ret) {
 | |
| 		dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret);
 | |
| 		goto readyirq_err;
 | |
| 	}
 | |
| 
 | |
| 	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
 | |
| 					twl6040_thint_handler, IRQF_ONESHOT,
 | |
| 					"twl6040_irq_th", twl6040);
 | |
| 	if (ret) {
 | |
| 		dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
 | |
| 		goto readyirq_err;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
 | |
| 	 * We can add the ASoC codec child whenever this driver has been loaded.
 | |
| 	 */
 | |
| 	irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG);
 | |
| 	cell = &twl6040->cells[children];
 | |
| 	cell->name = "twl6040-codec";
 | |
| 	twl6040_codec_rsrc[0].start = irq;
 | |
| 	twl6040_codec_rsrc[0].end = irq;
 | |
| 	cell->resources = twl6040_codec_rsrc;
 | |
| 	cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
 | |
| 	children++;
 | |
| 
 | |
| 	/* Vibra input driver support */
 | |
| 	if (twl6040_has_vibra(node)) {
 | |
| 		irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB);
 | |
| 
 | |
| 		cell = &twl6040->cells[children];
 | |
| 		cell->name = "twl6040-vibra";
 | |
| 		twl6040_vibra_rsrc[0].start = irq;
 | |
| 		twl6040_vibra_rsrc[0].end = irq;
 | |
| 		cell->resources = twl6040_vibra_rsrc;
 | |
| 		cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
 | |
| 		children++;
 | |
| 	}
 | |
| 
 | |
| 	/* GPO support */
 | |
| 	cell = &twl6040->cells[children];
 | |
| 	cell->name = "twl6040-gpo";
 | |
| 	children++;
 | |
| 
 | |
| 	/* PDM clock support  */
 | |
| 	cell = &twl6040->cells[children];
 | |
| 	cell->name = "twl6040-pdmclk";
 | |
| 	children++;
 | |
| 
 | |
| 	/* The chip is powered down so mark regmap to cache only and dirty */
 | |
| 	regcache_cache_only(twl6040->regmap, true);
 | |
| 	regcache_mark_dirty(twl6040->regmap);
 | |
| 
 | |
| 	ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
 | |
| 			      NULL, 0, NULL);
 | |
| 	if (ret)
 | |
| 		goto readyirq_err;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| readyirq_err:
 | |
| 	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
 | |
| gpio_err:
 | |
| 	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int twl6040_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct twl6040 *twl6040 = i2c_get_clientdata(client);
 | |
| 
 | |
| 	if (twl6040->power_count)
 | |
| 		twl6040_power(twl6040, 0);
 | |
| 
 | |
| 	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
 | |
| 
 | |
| 	mfd_remove_devices(&client->dev);
 | |
| 
 | |
| 	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id twl6040_i2c_id[] = {
 | |
| 	{ "twl6040", 0, },
 | |
| 	{ "twl6041", 0, },
 | |
| 	{ },
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);
 | |
| 
 | |
| static struct i2c_driver twl6040_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "twl6040",
 | |
| 	},
 | |
| 	.probe		= twl6040_probe,
 | |
| 	.remove		= twl6040_remove,
 | |
| 	.id_table	= twl6040_i2c_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(twl6040_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("TWL6040 MFD");
 | |
| MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
 | |
| MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
 | |
| MODULE_LICENSE("GPL");
 | 
