122 lines
2.7 KiB
C
122 lines
2.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018 Stefan Roese <sr@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <ram.h>
|
|
#include <wdt.h>
|
|
#include <asm/io.h>
|
|
#include <linux/io.h>
|
|
#include <linux/sizes.h>
|
|
#include "mt76xx.h"
|
|
|
|
#define STR_LEN 6
|
|
|
|
#ifdef CONFIG_BOOT_ROM
|
|
int mach_cpu_init(void)
|
|
{
|
|
ddr_calibrate();
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_256M);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int print_cpuinfo(void)
|
|
{
|
|
static const char * const boot_str[] = { "PLL (3-Byte SPI Addr)",
|
|
"PLL (4-Byte SPI Addr)",
|
|
"XTAL (3-Byte SPI Addr)",
|
|
"XTAL (4-Byte SPI Addr)" };
|
|
const void *blob = gd->fdt_blob;
|
|
void __iomem *sysc_base;
|
|
char buf[STR_LEN + 1];
|
|
fdt_addr_t base;
|
|
fdt_size_t size;
|
|
char *str;
|
|
int node;
|
|
u32 val;
|
|
|
|
/* Get system controller base address */
|
|
node = fdt_node_offset_by_compatible(blob, -1, "ralink,mt7620a-sysc");
|
|
if (node < 0)
|
|
return -FDT_ERR_NOTFOUND;
|
|
|
|
base = fdtdec_get_addr_size_auto_noparent(blob, node, "reg",
|
|
0, &size, true);
|
|
if (base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
sysc_base = ioremap_nocache(base, size);
|
|
|
|
str = (char *)sysc_base + MT76XX_CHIPID_OFFS;
|
|
snprintf(buf, STR_LEN + 1, "%s", str);
|
|
val = readl(sysc_base + MT76XX_CHIP_REV_ID_OFFS);
|
|
printf("CPU: %-*s Rev %ld.%ld - ", STR_LEN, buf,
|
|
(val & GENMASK(11, 8)) >> 8, val & GENMASK(3, 0));
|
|
|
|
val = (readl(sysc_base + MT76XX_SYSCFG0_OFFS) & GENMASK(3, 1)) >> 1;
|
|
printf("Boot from %s\n", boot_str[val]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_WATCHDOG
|
|
static struct udevice *watchdog_dev __attribute__((section(".data"))) = NULL;
|
|
|
|
/* Called by macro WATCHDOG_RESET */
|
|
void watchdog_reset(void)
|
|
{
|
|
static ulong next_reset;
|
|
ulong now;
|
|
|
|
if (!watchdog_dev)
|
|
return;
|
|
|
|
now = get_timer(0);
|
|
|
|
/* Do not reset the watchdog too often */
|
|
if (now > next_reset) {
|
|
next_reset = now + 1000; /* reset every 1000ms */
|
|
wdt_reset(watchdog_dev);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int arch_misc_init(void)
|
|
{
|
|
/*
|
|
* It has been noticed, that sometimes the d-cache is not in a
|
|
* "clean-state" when U-Boot is running on MT7688. This was
|
|
* detected when using the ethernet driver (which uses d-cache)
|
|
* and a TFTP command does not complete. Flushing the complete
|
|
* d-cache (again?) here seems to fix this issue.
|
|
*/
|
|
flush_dcache_range(gd->bd->bi_memstart,
|
|
gd->bd->bi_memstart + gd->ram_size - 1);
|
|
|
|
#ifdef CONFIG_WATCHDOG
|
|
/* Init watchdog */
|
|
if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
|
|
debug("Watchdog: Not found by seq!\n");
|
|
if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
|
|
puts("Watchdog: Not found!\n");
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
wdt_start(watchdog_dev, 60000, 0); /* 60 seconds */
|
|
printf("Watchdog: Started\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|