2402 lines
		
	
	
		
			67 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			2402 lines
		
	
	
		
			67 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  *  s2255drv.c - a driver for the Sensoray 2255 USB video capture device
 | |
|  *
 | |
|  *   Copyright (C) 2007-2014 by Sensoray Company Inc.
 | |
|  *                              Dean Anderson
 | |
|  *
 | |
|  * Some video buffer code based on vivi driver:
 | |
|  *
 | |
|  * Sensoray 2255 device supports 4 simultaneous channels.
 | |
|  * The channels are not "crossbar" inputs, they are physically
 | |
|  * attached to separate video decoders.
 | |
|  *
 | |
|  * Because of USB2.0 bandwidth limitations. There is only a
 | |
|  * certain amount of data which may be transferred at one time.
 | |
|  *
 | |
|  * Example maximum bandwidth utilization:
 | |
|  *
 | |
|  * -full size, color mode YUYV or YUV422P: 2 channels at once
 | |
|  * -full or half size Grey scale: all 4 channels at once
 | |
|  * -half size, color mode YUYV or YUV422P: all 4 channels at once
 | |
|  * -full size, color mode YUYV or YUV422P 1/2 frame rate: all 4 channels
 | |
|  *  at once.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/firmware.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/videodev2.h>
 | |
| #include <linux/mm.h>
 | |
| #include <linux/vmalloc.h>
 | |
| #include <linux/usb.h>
 | |
| #include <media/videobuf2-v4l2.h>
 | |
| #include <media/videobuf2-vmalloc.h>
 | |
| #include <media/v4l2-common.h>
 | |
| #include <media/v4l2-device.h>
 | |
| #include <media/v4l2-ioctl.h>
 | |
| #include <media/v4l2-ctrls.h>
 | |
| #include <media/v4l2-event.h>
 | |
| 
 | |
| #define S2255_VERSION		"1.25.1"
 | |
| #define FIRMWARE_FILE_NAME "f2255usb.bin"
 | |
| 
 | |
| /* default JPEG quality */
 | |
| #define S2255_DEF_JPEG_QUAL     50
 | |
| /* vendor request in */
 | |
| #define S2255_VR_IN		0
 | |
| /* vendor request out */
 | |
| #define S2255_VR_OUT		1
 | |
| /* firmware query */
 | |
| #define S2255_VR_FW		0x30
 | |
| /* USB endpoint number for configuring the device */
 | |
| #define S2255_CONFIG_EP         2
 | |
| /* maximum time for DSP to start responding after last FW word loaded(ms) */
 | |
| #define S2255_DSP_BOOTTIME      800
 | |
| /* maximum time to wait for firmware to load (ms) */
 | |
| #define S2255_LOAD_TIMEOUT      (5000 + S2255_DSP_BOOTTIME)
 | |
| #define S2255_MIN_BUFS          2
 | |
| #define S2255_SETMODE_TIMEOUT   500
 | |
| #define S2255_VIDSTATUS_TIMEOUT 350
 | |
| #define S2255_MARKER_FRAME	cpu_to_le32(0x2255DA4AL)
 | |
| #define S2255_MARKER_RESPONSE	cpu_to_le32(0x2255ACACL)
 | |
| #define S2255_RESPONSE_SETMODE  cpu_to_le32(0x01)
 | |
| #define S2255_RESPONSE_FW       cpu_to_le32(0x10)
 | |
| #define S2255_RESPONSE_STATUS   cpu_to_le32(0x20)
 | |
| #define S2255_USB_XFER_SIZE	(16 * 1024)
 | |
| #define MAX_CHANNELS		4
 | |
| #define SYS_FRAMES		4
 | |
| /* maximum size is PAL full size plus room for the marker header(s) */
 | |
| #define SYS_FRAMES_MAXSIZE	(720*288*2*2 + 4096)
 | |
| #define DEF_USB_BLOCK		S2255_USB_XFER_SIZE
 | |
| #define LINE_SZ_4CIFS_NTSC	640
 | |
| #define LINE_SZ_2CIFS_NTSC	640
 | |
| #define LINE_SZ_1CIFS_NTSC	320
 | |
| #define LINE_SZ_4CIFS_PAL	704
 | |
| #define LINE_SZ_2CIFS_PAL	704
 | |
| #define LINE_SZ_1CIFS_PAL	352
 | |
| #define NUM_LINES_4CIFS_NTSC	240
 | |
| #define NUM_LINES_2CIFS_NTSC	240
 | |
| #define NUM_LINES_1CIFS_NTSC	240
 | |
| #define NUM_LINES_4CIFS_PAL	288
 | |
| #define NUM_LINES_2CIFS_PAL	288
 | |
| #define NUM_LINES_1CIFS_PAL	288
 | |
| #define LINE_SZ_DEF		640
 | |
| #define NUM_LINES_DEF		240
 | |
| 
 | |
| 
 | |
| /* predefined settings */
 | |
| #define FORMAT_NTSC	1
 | |
| #define FORMAT_PAL	2
 | |
| 
 | |
| #define SCALE_4CIFS	1	/* 640x480(NTSC) or 704x576(PAL) */
 | |
| #define SCALE_2CIFS	2	/* 640x240(NTSC) or 704x288(PAL) */
 | |
| #define SCALE_1CIFS	3	/* 320x240(NTSC) or 352x288(PAL) */
 | |
| /* SCALE_4CIFSI is the 2 fields interpolated into one */
 | |
| #define SCALE_4CIFSI	4	/* 640x480(NTSC) or 704x576(PAL) high quality */
 | |
| 
 | |
| #define COLOR_YUVPL	1	/* YUV planar */
 | |
| #define COLOR_YUVPK	2	/* YUV packed */
 | |
| #define COLOR_Y8	4	/* monochrome */
 | |
| #define COLOR_JPG       5       /* JPEG */
 | |
| 
 | |
| #define MASK_COLOR       0x000000ff
 | |
| #define MASK_JPG_QUALITY 0x0000ff00
 | |
| #define MASK_INPUT_TYPE  0x000f0000
 | |
| /* frame decimation. */
 | |
| #define FDEC_1		1	/* capture every frame. default */
 | |
| #define FDEC_2		2	/* capture every 2nd frame */
 | |
| #define FDEC_3		3	/* capture every 3rd frame */
 | |
| #define FDEC_5		5	/* capture every 5th frame */
 | |
| 
 | |
| /*-------------------------------------------------------
 | |
|  * Default mode parameters.
 | |
|  *-------------------------------------------------------*/
 | |
| #define DEF_SCALE	SCALE_4CIFS
 | |
| #define DEF_COLOR	COLOR_YUVPL
 | |
| #define DEF_FDEC	FDEC_1
 | |
| #define DEF_BRIGHT	0
 | |
| #define DEF_CONTRAST	0x5c
 | |
| #define DEF_SATURATION	0x80
 | |
| #define DEF_HUE		0
 | |
| 
 | |
| /* usb config commands */
 | |
| #define IN_DATA_TOKEN	cpu_to_le32(0x2255c0de)
 | |
| #define CMD_2255	0xc2255000
 | |
| #define CMD_SET_MODE	cpu_to_le32((CMD_2255 | 0x10))
 | |
| #define CMD_START	cpu_to_le32((CMD_2255 | 0x20))
 | |
| #define CMD_STOP	cpu_to_le32((CMD_2255 | 0x30))
 | |
| #define CMD_STATUS	cpu_to_le32((CMD_2255 | 0x40))
 | |
| 
 | |
| struct s2255_mode {
 | |
| 	u32 format;	/* input video format (NTSC, PAL) */
 | |
| 	u32 scale;	/* output video scale */
 | |
| 	u32 color;	/* output video color format */
 | |
| 	u32 fdec;	/* frame decimation */
 | |
| 	u32 bright;	/* brightness */
 | |
| 	u32 contrast;	/* contrast */
 | |
| 	u32 saturation;	/* saturation */
 | |
| 	u32 hue;	/* hue (NTSC only)*/
 | |
| 	u32 single;	/* capture 1 frame at a time (!=0), continuously (==0)*/
 | |
| 	u32 usb_block;	/* block size. should be 4096 of DEF_USB_BLOCK */
 | |
| 	u32 restart;	/* if DSP requires restart */
 | |
| };
 | |
| 
 | |
| 
 | |
| #define S2255_READ_IDLE		0
 | |
| #define S2255_READ_FRAME	1
 | |
| 
 | |
| /* frame structure */
 | |
| struct s2255_framei {
 | |
| 	unsigned long size;
 | |
| 	unsigned long ulState;	/* ulState:S2255_READ_IDLE, S2255_READ_FRAME*/
 | |
| 	void *lpvbits;		/* image data */
 | |
| 	unsigned long cur_size;	/* current data copied to it */
 | |
| };
 | |
| 
 | |
| /* image buffer structure */
 | |
| struct s2255_bufferi {
 | |
| 	unsigned long dwFrames;			/* number of frames in buffer */
 | |
| 	struct s2255_framei frame[SYS_FRAMES];	/* array of FRAME structures */
 | |
| };
 | |
| 
 | |
| #define DEF_MODEI_NTSC_CONT	{FORMAT_NTSC, DEF_SCALE, DEF_COLOR,	\
 | |
| 			DEF_FDEC, DEF_BRIGHT, DEF_CONTRAST, DEF_SATURATION, \
 | |
| 			DEF_HUE, 0, DEF_USB_BLOCK, 0}
 | |
| 
 | |
| /* for firmware loading, fw_state */
 | |
| #define S2255_FW_NOTLOADED	0
 | |
| #define S2255_FW_LOADED_DSPWAIT	1
 | |
| #define S2255_FW_SUCCESS	2
 | |
| #define S2255_FW_FAILED		3
 | |
| #define S2255_FW_DISCONNECTING  4
 | |
| #define S2255_FW_MARKER		cpu_to_le32(0x22552f2f)
 | |
| /* 2255 read states */
 | |
| #define S2255_READ_IDLE         0
 | |
| #define S2255_READ_FRAME        1
 | |
| struct s2255_fw {
 | |
| 	int		      fw_loaded;
 | |
| 	int		      fw_size;
 | |
| 	struct urb	      *fw_urb;
 | |
| 	atomic_t	      fw_state;
 | |
| 	void		      *pfw_data;
 | |
| 	wait_queue_head_t     wait_fw;
 | |
| 	const struct firmware *fw;
 | |
| };
 | |
| 
 | |
| struct s2255_pipeinfo {
 | |
| 	u32 max_transfer_size;
 | |
| 	u32 cur_transfer_size;
 | |
| 	u8 *transfer_buffer;
 | |
| 	u32 state;
 | |
| 	void *stream_urb;
 | |
| 	void *dev;	/* back pointer to s2255_dev struct*/
 | |
| 	u32 err_count;
 | |
| 	u32 idx;
 | |
| };
 | |
| 
 | |
| struct s2255_fmt; /*forward declaration */
 | |
| struct s2255_dev;
 | |
| 
 | |
| /* 2255 video channel */
 | |
| struct s2255_vc {
 | |
| 	struct s2255_dev        *dev;
 | |
| 	struct video_device	vdev;
 | |
| 	struct v4l2_ctrl_handler hdl;
 | |
| 	struct v4l2_ctrl	*jpegqual_ctrl;
 | |
| 	int			resources;
 | |
| 	struct list_head        buf_list;
 | |
| 	struct s2255_bufferi	buffer;
 | |
| 	struct s2255_mode	mode;
 | |
| 	v4l2_std_id		std;
 | |
| 	/* jpeg compression */
 | |
| 	unsigned		jpegqual;
 | |
| 	/* capture parameters (for high quality mode full size) */
 | |
| 	struct v4l2_captureparm cap_parm;
 | |
| 	int			cur_frame;
 | |
| 	int			last_frame;
 | |
| 	/* allocated image size */
 | |
| 	unsigned long		req_image_size;
 | |
| 	/* received packet size */
 | |
| 	unsigned long		pkt_size;
 | |
| 	int			bad_payload;
 | |
| 	unsigned long		frame_count;
 | |
| 	/* if JPEG image */
 | |
| 	int                     jpg_size;
 | |
| 	/* if channel configured to default state */
 | |
| 	int                     configured;
 | |
| 	wait_queue_head_t       wait_setmode;
 | |
| 	int                     setmode_ready;
 | |
| 	/* video status items */
 | |
| 	int                     vidstatus;
 | |
| 	wait_queue_head_t       wait_vidstatus;
 | |
| 	int                     vidstatus_ready;
 | |
| 	unsigned int		width;
 | |
| 	unsigned int		height;
 | |
| 	enum v4l2_field         field;
 | |
| 	const struct s2255_fmt	*fmt;
 | |
| 	int idx; /* channel number on device, 0-3 */
 | |
| 	struct vb2_queue vb_vidq;
 | |
| 	struct mutex vb_lock; /* streaming lock */
 | |
| 	spinlock_t qlock;
 | |
| };
 | |
| 
 | |
| 
 | |
| struct s2255_dev {
 | |
| 	struct s2255_vc         vc[MAX_CHANNELS];
 | |
| 	struct v4l2_device      v4l2_dev;
 | |
| 	atomic_t                num_channels;
 | |
| 	int			frames;
 | |
| 	struct mutex		lock;	/* channels[].vdev.lock */
 | |
| 	struct mutex		cmdlock; /* protects cmdbuf */
 | |
| 	struct usb_device	*udev;
 | |
| 	struct usb_interface	*interface;
 | |
| 	u8			read_endpoint;
 | |
| 	struct timer_list	timer;
 | |
| 	struct s2255_fw	*fw_data;
 | |
| 	struct s2255_pipeinfo	pipe;
 | |
| 	u32			cc;	/* current channel */
 | |
| 	int			frame_ready;
 | |
| 	int                     chn_ready;
 | |
| 	/* dsp firmware version (f2255usb.bin) */
 | |
| 	int                     dsp_fw_ver;
 | |
| 	u16                     pid; /* product id */
 | |
| #define S2255_CMDBUF_SIZE 512
 | |
| 	__le32                  *cmdbuf;
 | |
| };
 | |
| 
 | |
| static inline struct s2255_dev *to_s2255_dev(struct v4l2_device *v4l2_dev)
 | |
| {
 | |
| 	return container_of(v4l2_dev, struct s2255_dev, v4l2_dev);
 | |
| }
 | |
| 
 | |
| struct s2255_fmt {
 | |
| 	char *name;
 | |
| 	u32 fourcc;
 | |
| 	int depth;
 | |
| };
 | |
| 
 | |
| /* buffer for one video frame */
 | |
| struct s2255_buffer {
 | |
| 	/* common v4l buffer stuff -- must be first */
 | |
| 	struct vb2_v4l2_buffer vb;
 | |
| 	struct list_head list;
 | |
| };
 | |
| 
 | |
| 
 | |
| /* current cypress EEPROM firmware version */
 | |
| #define S2255_CUR_USB_FWVER	((3 << 8) | 12)
 | |
| /* current DSP FW version */
 | |
| #define S2255_CUR_DSP_FWVER     10104
 | |
| /* Need DSP version 5+ for video status feature */
 | |
| #define S2255_MIN_DSP_STATUS      5
 | |
| #define S2255_MIN_DSP_COLORFILTER 8
 | |
| #define S2255_NORMS		(V4L2_STD_ALL)
 | |
| 
 | |
| /* private V4L2 controls */
 | |
| 
 | |
| /*
 | |
|  * The following chart displays how COLORFILTER should be set
 | |
|  *  =========================================================
 | |
|  *  =     fourcc              =     COLORFILTER             =
 | |
|  *  =                         ===============================
 | |
|  *  =                         =   0             =    1      =
 | |
|  *  =========================================================
 | |
|  *  =  V4L2_PIX_FMT_GREY(Y8)  = monochrome from = monochrome=
 | |
|  *  =                         = s-video or      = composite =
 | |
|  *  =                         = B/W camera      = input     =
 | |
|  *  =========================================================
 | |
|  *  =    other                = color, svideo   = color,    =
 | |
|  *  =                         =                 = composite =
 | |
|  *  =========================================================
 | |
|  *
 | |
|  * Notes:
 | |
|  *   channels 0-3 on 2255 are composite
 | |
|  *   channels 0-1 on 2257 are composite, 2-3 are s-video
 | |
|  * If COLORFILTER is 0 with a composite color camera connected,
 | |
|  * the output will appear monochrome but hatching
 | |
|  * will occur.
 | |
|  * COLORFILTER is different from "color killer" and "color effects"
 | |
|  * for reasons above.
 | |
|  */
 | |
| #define S2255_V4L2_YC_ON  1
 | |
| #define S2255_V4L2_YC_OFF 0
 | |
| #define V4L2_CID_S2255_COLORFILTER (V4L2_CID_USER_S2255_BASE + 0)
 | |
| 
 | |
| /* frame prefix size (sent once every frame) */
 | |
| #define PREFIX_SIZE		512
 | |
| 
 | |
| /* Channels on box are in reverse order */
 | |
| static unsigned long G_chnmap[MAX_CHANNELS] = {3, 2, 1, 0};
 | |
| 
 | |
| static int debug;
 | |
| 
 | |
| static int s2255_start_readpipe(struct s2255_dev *dev);
 | |
| static void s2255_stop_readpipe(struct s2255_dev *dev);
 | |
| static int s2255_start_acquire(struct s2255_vc *vc);
 | |
| static int s2255_stop_acquire(struct s2255_vc *vc);
 | |
| static void s2255_fillbuff(struct s2255_vc *vc, struct s2255_buffer *buf,
 | |
| 			   int jpgsize);
 | |
| static int s2255_set_mode(struct s2255_vc *vc, struct s2255_mode *mode);
 | |
| static int s2255_board_shutdown(struct s2255_dev *dev);
 | |
| static void s2255_fwload_start(struct s2255_dev *dev);
 | |
| static void s2255_destroy(struct s2255_dev *dev);
 | |
| static long s2255_vendor_req(struct s2255_dev *dev, unsigned char req,
 | |
| 			     u16 index, u16 value, void *buf,
 | |
| 			     s32 buf_len, int bOut);
 | |
| 
 | |
| /* dev_err macro with driver name */
 | |
| #define S2255_DRIVER_NAME "s2255"
 | |
| #define s2255_dev_err(dev, fmt, arg...)					\
 | |
| 		dev_err(dev, S2255_DRIVER_NAME " - " fmt, ##arg)
 | |
| 
 | |
| #define dprintk(dev, level, fmt, arg...) \
 | |
| 	v4l2_dbg(level, debug, &dev->v4l2_dev, fmt, ## arg)
 | |
| 
 | |
| static struct usb_driver s2255_driver;
 | |
| 
 | |
| /* start video number */
 | |
| static int video_nr = -1;	/* /dev/videoN, -1 for autodetect */
 | |
| 
 | |
| /* Enable jpeg capture. */
 | |
| static int jpeg_enable = 1;
 | |
| 
 | |
| module_param(debug, int, 0644);
 | |
| MODULE_PARM_DESC(debug, "Debug level(0-100) default 0");
 | |
| module_param(video_nr, int, 0644);
 | |
| MODULE_PARM_DESC(video_nr, "start video minor(-1 default autodetect)");
 | |
| module_param(jpeg_enable, int, 0644);
 | |
| MODULE_PARM_DESC(jpeg_enable, "Jpeg enable(1-on 0-off) default 1");
 | |
| 
 | |
| /* USB device table */
 | |
| #define USB_SENSORAY_VID	0x1943
 | |
| static const struct usb_device_id s2255_table[] = {
 | |
| 	{USB_DEVICE(USB_SENSORAY_VID, 0x2255)},
 | |
| 	{USB_DEVICE(USB_SENSORAY_VID, 0x2257)}, /*same family as 2255*/
 | |
| 	{ }			/* Terminating entry */
 | |
| };
 | |
| MODULE_DEVICE_TABLE(usb, s2255_table);
 | |
| 
 | |
| #define BUFFER_TIMEOUT msecs_to_jiffies(400)
 | |
| 
 | |
| /* image formats.  */
 | |
| /* JPEG formats must be defined last to support jpeg_enable parameter */
 | |
| static const struct s2255_fmt formats[] = {
 | |
| 	{
 | |
| 		.name = "4:2:2, packed, YUYV",
 | |
| 		.fourcc = V4L2_PIX_FMT_YUYV,
 | |
| 		.depth = 16
 | |
| 
 | |
| 	}, {
 | |
| 		.name = "4:2:2, packed, UYVY",
 | |
| 		.fourcc = V4L2_PIX_FMT_UYVY,
 | |
| 		.depth = 16
 | |
| 	}, {
 | |
| 		.name = "4:2:2, planar, YUV422P",
 | |
| 		.fourcc = V4L2_PIX_FMT_YUV422P,
 | |
| 		.depth = 16
 | |
| 
 | |
| 	}, {
 | |
| 		.name = "8bpp GREY",
 | |
| 		.fourcc = V4L2_PIX_FMT_GREY,
 | |
| 		.depth = 8
 | |
| 	}, {
 | |
| 		.name = "JPG",
 | |
| 		.fourcc = V4L2_PIX_FMT_JPEG,
 | |
| 		.depth = 24
 | |
| 	}, {
 | |
| 		.name = "MJPG",
 | |
| 		.fourcc = V4L2_PIX_FMT_MJPEG,
 | |
| 		.depth = 24
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static int norm_maxw(struct s2255_vc *vc)
 | |
| {
 | |
| 	return (vc->std & V4L2_STD_525_60) ?
 | |
| 	    LINE_SZ_4CIFS_NTSC : LINE_SZ_4CIFS_PAL;
 | |
| }
 | |
| 
 | |
| static int norm_maxh(struct s2255_vc *vc)
 | |
| {
 | |
| 	return (vc->std & V4L2_STD_525_60) ?
 | |
| 	    (NUM_LINES_1CIFS_NTSC * 2) : (NUM_LINES_1CIFS_PAL * 2);
 | |
| }
 | |
| 
 | |
| static int norm_minw(struct s2255_vc *vc)
 | |
| {
 | |
| 	return (vc->std & V4L2_STD_525_60) ?
 | |
| 	    LINE_SZ_1CIFS_NTSC : LINE_SZ_1CIFS_PAL;
 | |
| }
 | |
| 
 | |
| static int norm_minh(struct s2255_vc *vc)
 | |
| {
 | |
| 	return (vc->std & V4L2_STD_525_60) ?
 | |
| 	    (NUM_LINES_1CIFS_NTSC) : (NUM_LINES_1CIFS_PAL);
 | |
| }
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * TODO: fixme: move YUV reordering to hardware
 | |
|  * converts 2255 planar format to yuyv or uyvy
 | |
|  */
 | |
| static void planar422p_to_yuv_packed(const unsigned char *in,
 | |
| 				     unsigned char *out,
 | |
| 				     int width, int height,
 | |
| 				     int fmt)
 | |
| {
 | |
| 	unsigned char *pY;
 | |
| 	unsigned char *pCb;
 | |
| 	unsigned char *pCr;
 | |
| 	unsigned long size = height * width;
 | |
| 	unsigned int i;
 | |
| 	pY = (unsigned char *)in;
 | |
| 	pCr = (unsigned char *)in + height * width;
 | |
| 	pCb = (unsigned char *)in + height * width + (height * width / 2);
 | |
| 	for (i = 0; i < size * 2; i += 4) {
 | |
| 		out[i] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCr++;
 | |
| 		out[i + 1] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCr++ : *pY++;
 | |
| 		out[i + 2] = (fmt == V4L2_PIX_FMT_YUYV) ? *pY++ : *pCb++;
 | |
| 		out[i + 3] = (fmt == V4L2_PIX_FMT_YUYV) ? *pCb++ : *pY++;
 | |
| 	}
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| static void s2255_reset_dsppower(struct s2255_dev *dev)
 | |
| {
 | |
| 	s2255_vendor_req(dev, 0x40, 0x0000, 0x0001, NULL, 0, 1);
 | |
| 	msleep(50);
 | |
| 	s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1);
 | |
| 	msleep(600);
 | |
| 	s2255_vendor_req(dev, 0x10, 0x0000, 0x0000, NULL, 0, 1);
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| /* kickstarts the firmware loading. from probe
 | |
|  */
 | |
| static void s2255_timer(struct timer_list *t)
 | |
| {
 | |
| 	struct s2255_dev *dev = from_timer(dev, t, timer);
 | |
| 	struct s2255_fw *data = dev->fw_data;
 | |
| 	if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) {
 | |
| 		pr_err("s2255: can't submit urb\n");
 | |
| 		atomic_set(&data->fw_state, S2255_FW_FAILED);
 | |
| 		/* wake up anything waiting for the firmware */
 | |
| 		wake_up(&data->wait_fw);
 | |
| 		return;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| 
 | |
| /* this loads the firmware asynchronously.
 | |
|    Originally this was done synchronously in probe.
 | |
|    But it is better to load it asynchronously here than block
 | |
|    inside the probe function. Blocking inside probe affects boot time.
 | |
|    FW loading is triggered by the timer in the probe function
 | |
| */
 | |
| static void s2255_fwchunk_complete(struct urb *urb)
 | |
| {
 | |
| 	struct s2255_fw *data = urb->context;
 | |
| 	struct usb_device *udev = urb->dev;
 | |
| 	int len;
 | |
| 	if (urb->status) {
 | |
| 		dev_err(&udev->dev, "URB failed with status %d\n", urb->status);
 | |
| 		atomic_set(&data->fw_state, S2255_FW_FAILED);
 | |
| 		/* wake up anything waiting for the firmware */
 | |
| 		wake_up(&data->wait_fw);
 | |
| 		return;
 | |
| 	}
 | |
| 	if (data->fw_urb == NULL) {
 | |
| 		s2255_dev_err(&udev->dev, "disconnected\n");
 | |
| 		atomic_set(&data->fw_state, S2255_FW_FAILED);
 | |
| 		/* wake up anything waiting for the firmware */
 | |
| 		wake_up(&data->wait_fw);
 | |
| 		return;
 | |
| 	}
 | |
| #define CHUNK_SIZE 512
 | |
| 	/* all USB transfers must be done with continuous kernel memory.
 | |
| 	   can't allocate more than 128k in current linux kernel, so
 | |
| 	   upload the firmware in chunks
 | |
| 	 */
 | |
| 	if (data->fw_loaded < data->fw_size) {
 | |
| 		len = (data->fw_loaded + CHUNK_SIZE) > data->fw_size ?
 | |
| 		    data->fw_size % CHUNK_SIZE : CHUNK_SIZE;
 | |
| 
 | |
| 		if (len < CHUNK_SIZE)
 | |
| 			memset(data->pfw_data, 0, CHUNK_SIZE);
 | |
| 
 | |
| 		memcpy(data->pfw_data,
 | |
| 		       (char *) data->fw->data + data->fw_loaded, len);
 | |
| 
 | |
| 		usb_fill_bulk_urb(data->fw_urb, udev, usb_sndbulkpipe(udev, 2),
 | |
| 				  data->pfw_data, CHUNK_SIZE,
 | |
| 				  s2255_fwchunk_complete, data);
 | |
| 		if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) {
 | |
| 			dev_err(&udev->dev, "failed submit URB\n");
 | |
| 			atomic_set(&data->fw_state, S2255_FW_FAILED);
 | |
| 			/* wake up anything waiting for the firmware */
 | |
| 			wake_up(&data->wait_fw);
 | |
| 			return;
 | |
| 		}
 | |
| 		data->fw_loaded += len;
 | |
| 	} else
 | |
| 		atomic_set(&data->fw_state, S2255_FW_LOADED_DSPWAIT);
 | |
| 	return;
 | |
| 
 | |
| }
 | |
| 
 | |
| static void s2255_got_frame(struct s2255_vc *vc, int jpgsize)
 | |
| {
 | |
| 	struct s2255_buffer *buf;
 | |
| 	struct s2255_dev *dev = to_s2255_dev(vc->vdev.v4l2_dev);
 | |
| 	unsigned long flags = 0;
 | |
| 
 | |
| 	spin_lock_irqsave(&vc->qlock, flags);
 | |
| 	if (list_empty(&vc->buf_list)) {
 | |
| 		dprintk(dev, 1, "No active queue to serve\n");
 | |
| 		spin_unlock_irqrestore(&vc->qlock, flags);
 | |
| 		return;
 | |
| 	}
 | |
| 	buf = list_entry(vc->buf_list.next,
 | |
| 			 struct s2255_buffer, list);
 | |
| 	list_del(&buf->list);
 | |
| 	buf->vb.vb2_buf.timestamp = ktime_get_ns();
 | |
| 	buf->vb.field = vc->field;
 | |
| 	buf->vb.sequence = vc->frame_count;
 | |
| 	spin_unlock_irqrestore(&vc->qlock, flags);
 | |
| 
 | |
| 	s2255_fillbuff(vc, buf, jpgsize);
 | |
| 	/* tell v4l buffer was filled */
 | |
| 	vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
 | |
| 	dprintk(dev, 2, "%s: [buf] [%p]\n", __func__, buf);
 | |
| }
 | |
| 
 | |
| static const struct s2255_fmt *format_by_fourcc(int fourcc)
 | |
| {
 | |
| 	unsigned int i;
 | |
| 	for (i = 0; i < ARRAY_SIZE(formats); i++) {
 | |
| 		if (-1 == formats[i].fourcc)
 | |
| 			continue;
 | |
| 		if (!jpeg_enable && ((formats[i].fourcc == V4L2_PIX_FMT_JPEG) ||
 | |
| 				     (formats[i].fourcc == V4L2_PIX_FMT_MJPEG)))
 | |
| 			continue;
 | |
| 		if (formats[i].fourcc == fourcc)
 | |
| 			return formats + i;
 | |
| 	}
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /* video buffer vmalloc implementation based partly on VIVI driver which is
 | |
|  *          Copyright (c) 2006 by
 | |
|  *                  Mauro Carvalho Chehab <mchehab--a.t--infradead.org>
 | |
|  *                  Ted Walther <ted--a.t--enumera.com>
 | |
|  *                  John Sokol <sokol--a.t--videotechnology.com>
 | |
|  *                  http://v4l.videotechnology.com/
 | |
|  *
 | |
|  */
 | |
| static void s2255_fillbuff(struct s2255_vc *vc,
 | |
| 			   struct s2255_buffer *buf, int jpgsize)
 | |
| {
 | |
| 	int pos = 0;
 | |
| 	const char *tmpbuf;
 | |
| 	char *vbuf = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
 | |
| 	unsigned long last_frame;
 | |
| 	struct s2255_dev *dev = vc->dev;
 | |
| 
 | |
| 	if (!vbuf)
 | |
| 		return;
 | |
| 	last_frame = vc->last_frame;
 | |
| 	if (last_frame != -1) {
 | |
| 		tmpbuf =
 | |
| 		    (const char *)vc->buffer.frame[last_frame].lpvbits;
 | |
| 		switch (vc->fmt->fourcc) {
 | |
| 		case V4L2_PIX_FMT_YUYV:
 | |
| 		case V4L2_PIX_FMT_UYVY:
 | |
| 			planar422p_to_yuv_packed((const unsigned char *)tmpbuf,
 | |
| 						 vbuf, vc->width,
 | |
| 						 vc->height,
 | |
| 						 vc->fmt->fourcc);
 | |
| 			break;
 | |
| 		case V4L2_PIX_FMT_GREY:
 | |
| 			memcpy(vbuf, tmpbuf, vc->width * vc->height);
 | |
| 			break;
 | |
| 		case V4L2_PIX_FMT_JPEG:
 | |
| 		case V4L2_PIX_FMT_MJPEG:
 | |
| 			vb2_set_plane_payload(&buf->vb.vb2_buf, 0, jpgsize);
 | |
| 			memcpy(vbuf, tmpbuf, jpgsize);
 | |
| 			break;
 | |
| 		case V4L2_PIX_FMT_YUV422P:
 | |
| 			memcpy(vbuf, tmpbuf,
 | |
| 			       vc->width * vc->height * 2);
 | |
| 			break;
 | |
| 		default:
 | |
| 			pr_info("s2255: unknown format?\n");
 | |
| 		}
 | |
| 		vc->last_frame = -1;
 | |
| 	} else {
 | |
| 		pr_err("s2255: =======no frame\n");
 | |
| 		return;
 | |
| 	}
 | |
| 	dprintk(dev, 2, "s2255fill at : Buffer %p size= %d\n",
 | |
| 		vbuf, pos);
 | |
| }
 | |
| 
 | |
| 
 | |
| /* ------------------------------------------------------------------
 | |
|    Videobuf operations
 | |
|    ------------------------------------------------------------------*/
 | |
| 
 | |
| static int queue_setup(struct vb2_queue *vq,
 | |
| 		       unsigned int *nbuffers, unsigned int *nplanes,
 | |
| 		       unsigned int sizes[], struct device *alloc_devs[])
 | |
| {
 | |
| 	struct s2255_vc *vc = vb2_get_drv_priv(vq);
 | |
| 	if (*nbuffers < S2255_MIN_BUFS)
 | |
| 		*nbuffers = S2255_MIN_BUFS;
 | |
| 	*nplanes = 1;
 | |
| 	sizes[0] = vc->width * vc->height * (vc->fmt->depth >> 3);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int buffer_prepare(struct vb2_buffer *vb)
 | |
| {
 | |
| 	struct s2255_vc *vc = vb2_get_drv_priv(vb->vb2_queue);
 | |
| 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 | |
| 	struct s2255_buffer *buf = container_of(vbuf, struct s2255_buffer, vb);
 | |
| 	int w = vc->width;
 | |
| 	int h = vc->height;
 | |
| 	unsigned long size;
 | |
| 
 | |
| 	dprintk(vc->dev, 4, "%s\n", __func__);
 | |
| 	if (vc->fmt == NULL)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if ((w < norm_minw(vc)) ||
 | |
| 	    (w > norm_maxw(vc)) ||
 | |
| 	    (h < norm_minh(vc)) ||
 | |
| 	    (h > norm_maxh(vc))) {
 | |
| 		dprintk(vc->dev, 4, "invalid buffer prepare\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	size = w * h * (vc->fmt->depth >> 3);
 | |
| 	if (vb2_plane_size(vb, 0) < size) {
 | |
| 		dprintk(vc->dev, 4, "invalid buffer prepare\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void buffer_queue(struct vb2_buffer *vb)
 | |
| {
 | |
| 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 | |
| 	struct s2255_buffer *buf = container_of(vbuf, struct s2255_buffer, vb);
 | |
| 	struct s2255_vc *vc = vb2_get_drv_priv(vb->vb2_queue);
 | |
| 	unsigned long flags = 0;
 | |
| 	dprintk(vc->dev, 1, "%s\n", __func__);
 | |
| 	spin_lock_irqsave(&vc->qlock, flags);
 | |
| 	list_add_tail(&buf->list, &vc->buf_list);
 | |
| 	spin_unlock_irqrestore(&vc->qlock, flags);
 | |
| }
 | |
| 
 | |
| static int start_streaming(struct vb2_queue *vq, unsigned int count);
 | |
| static void stop_streaming(struct vb2_queue *vq);
 | |
| 
 | |
| static const struct vb2_ops s2255_video_qops = {
 | |
| 	.queue_setup = queue_setup,
 | |
| 	.buf_prepare = buffer_prepare,
 | |
| 	.buf_queue = buffer_queue,
 | |
| 	.start_streaming = start_streaming,
 | |
| 	.stop_streaming = stop_streaming,
 | |
| 	.wait_prepare = vb2_ops_wait_prepare,
 | |
| 	.wait_finish = vb2_ops_wait_finish,
 | |
| };
 | |
| 
 | |
| static int vidioc_querycap(struct file *file, void *priv,
 | |
| 			   struct v4l2_capability *cap)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 	struct s2255_dev *dev = vc->dev;
 | |
| 
 | |
| 	strlcpy(cap->driver, "s2255", sizeof(cap->driver));
 | |
| 	strlcpy(cap->card, "s2255", sizeof(cap->card));
 | |
| 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
 | |
| 	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
 | |
| 		V4L2_CAP_READWRITE;
 | |
| 	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
 | |
| 			       struct v4l2_fmtdesc *f)
 | |
| {
 | |
| 	int index = f->index;
 | |
| 
 | |
| 	if (index >= ARRAY_SIZE(formats))
 | |
| 		return -EINVAL;
 | |
| 	if (!jpeg_enable && ((formats[index].fourcc == V4L2_PIX_FMT_JPEG) ||
 | |
| 			(formats[index].fourcc == V4L2_PIX_FMT_MJPEG)))
 | |
| 		return -EINVAL;
 | |
| 	strlcpy(f->description, formats[index].name, sizeof(f->description));
 | |
| 	f->pixelformat = formats[index].fourcc;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
 | |
| 			    struct v4l2_format *f)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 	int is_ntsc = vc->std & V4L2_STD_525_60;
 | |
| 
 | |
| 	f->fmt.pix.width = vc->width;
 | |
| 	f->fmt.pix.height = vc->height;
 | |
| 	if (f->fmt.pix.height >=
 | |
| 	    (is_ntsc ? NUM_LINES_1CIFS_NTSC : NUM_LINES_1CIFS_PAL) * 2)
 | |
| 		f->fmt.pix.field = V4L2_FIELD_INTERLACED;
 | |
| 	else
 | |
| 		f->fmt.pix.field = V4L2_FIELD_TOP;
 | |
| 	f->fmt.pix.pixelformat = vc->fmt->fourcc;
 | |
| 	f->fmt.pix.bytesperline = f->fmt.pix.width * (vc->fmt->depth >> 3);
 | |
| 	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
 | |
| 	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
 | |
| 	f->fmt.pix.priv = 0;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 | |
| 			      struct v4l2_format *f)
 | |
| {
 | |
| 	const struct s2255_fmt *fmt;
 | |
| 	enum v4l2_field field;
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 	int is_ntsc = vc->std & V4L2_STD_525_60;
 | |
| 
 | |
| 	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
 | |
| 
 | |
| 	if (fmt == NULL)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	field = f->fmt.pix.field;
 | |
| 
 | |
| 	dprintk(vc->dev, 50, "%s NTSC: %d suggested width: %d, height: %d\n",
 | |
| 		__func__, is_ntsc, f->fmt.pix.width, f->fmt.pix.height);
 | |
| 	if (is_ntsc) {
 | |
| 		/* NTSC */
 | |
| 		if (f->fmt.pix.height >= NUM_LINES_1CIFS_NTSC * 2) {
 | |
| 			f->fmt.pix.height = NUM_LINES_1CIFS_NTSC * 2;
 | |
| 			field = V4L2_FIELD_INTERLACED;
 | |
| 		} else {
 | |
| 			f->fmt.pix.height = NUM_LINES_1CIFS_NTSC;
 | |
| 			field = V4L2_FIELD_TOP;
 | |
| 		}
 | |
| 		if (f->fmt.pix.width >= LINE_SZ_4CIFS_NTSC)
 | |
| 			f->fmt.pix.width = LINE_SZ_4CIFS_NTSC;
 | |
| 		else
 | |
| 			f->fmt.pix.width = LINE_SZ_1CIFS_NTSC;
 | |
| 	} else {
 | |
| 		/* PAL */
 | |
| 		if (f->fmt.pix.height >= NUM_LINES_1CIFS_PAL * 2) {
 | |
| 			f->fmt.pix.height = NUM_LINES_1CIFS_PAL * 2;
 | |
| 			field = V4L2_FIELD_INTERLACED;
 | |
| 		} else {
 | |
| 			f->fmt.pix.height = NUM_LINES_1CIFS_PAL;
 | |
| 			field = V4L2_FIELD_TOP;
 | |
| 		}
 | |
| 		if (f->fmt.pix.width >= LINE_SZ_4CIFS_PAL)
 | |
| 			f->fmt.pix.width = LINE_SZ_4CIFS_PAL;
 | |
| 		else
 | |
| 			f->fmt.pix.width = LINE_SZ_1CIFS_PAL;
 | |
| 	}
 | |
| 	f->fmt.pix.field = field;
 | |
| 	f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3;
 | |
| 	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
 | |
| 	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
 | |
| 	f->fmt.pix.priv = 0;
 | |
| 	dprintk(vc->dev, 50, "%s: set width %d height %d field %d\n", __func__,
 | |
| 		f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 | |
| 			    struct v4l2_format *f)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 	const struct s2255_fmt *fmt;
 | |
| 	struct vb2_queue *q = &vc->vb_vidq;
 | |
| 	struct s2255_mode mode;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = vidioc_try_fmt_vid_cap(file, vc, f);
 | |
| 
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
 | |
| 
 | |
| 	if (fmt == NULL)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (vb2_is_busy(q)) {
 | |
| 		dprintk(vc->dev, 1, "queue busy\n");
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	mode = vc->mode;
 | |
| 	vc->fmt = fmt;
 | |
| 	vc->width = f->fmt.pix.width;
 | |
| 	vc->height = f->fmt.pix.height;
 | |
| 	vc->field = f->fmt.pix.field;
 | |
| 	if (vc->width > norm_minw(vc)) {
 | |
| 		if (vc->height > norm_minh(vc)) {
 | |
| 			if (vc->cap_parm.capturemode &
 | |
| 			    V4L2_MODE_HIGHQUALITY)
 | |
| 				mode.scale = SCALE_4CIFSI;
 | |
| 			else
 | |
| 				mode.scale = SCALE_4CIFS;
 | |
| 		} else
 | |
| 			mode.scale = SCALE_2CIFS;
 | |
| 
 | |
| 	} else {
 | |
| 		mode.scale = SCALE_1CIFS;
 | |
| 	}
 | |
| 	/* color mode */
 | |
| 	switch (vc->fmt->fourcc) {
 | |
| 	case V4L2_PIX_FMT_GREY:
 | |
| 		mode.color &= ~MASK_COLOR;
 | |
| 		mode.color |= COLOR_Y8;
 | |
| 		break;
 | |
| 	case V4L2_PIX_FMT_JPEG:
 | |
| 	case V4L2_PIX_FMT_MJPEG:
 | |
| 		mode.color &= ~MASK_COLOR;
 | |
| 		mode.color |= COLOR_JPG;
 | |
| 		mode.color |= (vc->jpegqual << 8);
 | |
| 		break;
 | |
| 	case V4L2_PIX_FMT_YUV422P:
 | |
| 		mode.color &= ~MASK_COLOR;
 | |
| 		mode.color |= COLOR_YUVPL;
 | |
| 		break;
 | |
| 	case V4L2_PIX_FMT_YUYV:
 | |
| 	case V4L2_PIX_FMT_UYVY:
 | |
| 	default:
 | |
| 		mode.color &= ~MASK_COLOR;
 | |
| 		mode.color |= COLOR_YUVPK;
 | |
| 		break;
 | |
| 	}
 | |
| 	if ((mode.color & MASK_COLOR) != (vc->mode.color & MASK_COLOR))
 | |
| 		mode.restart = 1;
 | |
| 	else if (mode.scale != vc->mode.scale)
 | |
| 		mode.restart = 1;
 | |
| 	else if (mode.format != vc->mode.format)
 | |
| 		mode.restart = 1;
 | |
| 	vc->mode = mode;
 | |
| 	(void) s2255_set_mode(vc, &mode);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| 
 | |
| /* write to the configuration pipe, synchronously */
 | |
| static int s2255_write_config(struct usb_device *udev, unsigned char *pbuf,
 | |
| 			      int size)
 | |
| {
 | |
| 	int pipe;
 | |
| 	int done;
 | |
| 	long retval = -1;
 | |
| 	if (udev) {
 | |
| 		pipe = usb_sndbulkpipe(udev, S2255_CONFIG_EP);
 | |
| 		retval = usb_bulk_msg(udev, pipe, pbuf, size, &done, 500);
 | |
| 	}
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| static u32 get_transfer_size(struct s2255_mode *mode)
 | |
| {
 | |
| 	int linesPerFrame = LINE_SZ_DEF;
 | |
| 	int pixelsPerLine = NUM_LINES_DEF;
 | |
| 	u32 outImageSize;
 | |
| 	u32 usbInSize;
 | |
| 	unsigned int mask_mult;
 | |
| 
 | |
| 	if (mode == NULL)
 | |
| 		return 0;
 | |
| 
 | |
| 	if (mode->format == FORMAT_NTSC) {
 | |
| 		switch (mode->scale) {
 | |
| 		case SCALE_4CIFS:
 | |
| 		case SCALE_4CIFSI:
 | |
| 			linesPerFrame = NUM_LINES_4CIFS_NTSC * 2;
 | |
| 			pixelsPerLine = LINE_SZ_4CIFS_NTSC;
 | |
| 			break;
 | |
| 		case SCALE_2CIFS:
 | |
| 			linesPerFrame = NUM_LINES_2CIFS_NTSC;
 | |
| 			pixelsPerLine = LINE_SZ_2CIFS_NTSC;
 | |
| 			break;
 | |
| 		case SCALE_1CIFS:
 | |
| 			linesPerFrame = NUM_LINES_1CIFS_NTSC;
 | |
| 			pixelsPerLine = LINE_SZ_1CIFS_NTSC;
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	} else if (mode->format == FORMAT_PAL) {
 | |
| 		switch (mode->scale) {
 | |
| 		case SCALE_4CIFS:
 | |
| 		case SCALE_4CIFSI:
 | |
| 			linesPerFrame = NUM_LINES_4CIFS_PAL * 2;
 | |
| 			pixelsPerLine = LINE_SZ_4CIFS_PAL;
 | |
| 			break;
 | |
| 		case SCALE_2CIFS:
 | |
| 			linesPerFrame = NUM_LINES_2CIFS_PAL;
 | |
| 			pixelsPerLine = LINE_SZ_2CIFS_PAL;
 | |
| 			break;
 | |
| 		case SCALE_1CIFS:
 | |
| 			linesPerFrame = NUM_LINES_1CIFS_PAL;
 | |
| 			pixelsPerLine = LINE_SZ_1CIFS_PAL;
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 	outImageSize = linesPerFrame * pixelsPerLine;
 | |
| 	if ((mode->color & MASK_COLOR) != COLOR_Y8) {
 | |
| 		/* 2 bytes/pixel if not monochrome */
 | |
| 		outImageSize *= 2;
 | |
| 	}
 | |
| 
 | |
| 	/* total bytes to send including prefix and 4K padding;
 | |
| 	   must be a multiple of USB_READ_SIZE */
 | |
| 	usbInSize = outImageSize + PREFIX_SIZE;	/* always send prefix */
 | |
| 	mask_mult = 0xffffffffUL - DEF_USB_BLOCK + 1;
 | |
| 	/* if size not a multiple of USB_READ_SIZE */
 | |
| 	if (usbInSize & ~mask_mult)
 | |
| 		usbInSize = (usbInSize & mask_mult) + (DEF_USB_BLOCK);
 | |
| 	return usbInSize;
 | |
| }
 | |
| 
 | |
| static void s2255_print_cfg(struct s2255_dev *sdev, struct s2255_mode *mode)
 | |
| {
 | |
| 	struct device *dev = &sdev->udev->dev;
 | |
| 	dev_info(dev, "------------------------------------------------\n");
 | |
| 	dev_info(dev, "format: %d\nscale %d\n", mode->format, mode->scale);
 | |
| 	dev_info(dev, "fdec: %d\ncolor %d\n", mode->fdec, mode->color);
 | |
| 	dev_info(dev, "bright: 0x%x\n", mode->bright);
 | |
| 	dev_info(dev, "------------------------------------------------\n");
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * set mode is the function which controls the DSP.
 | |
|  * the restart parameter in struct s2255_mode should be set whenever
 | |
|  * the image size could change via color format, video system or image
 | |
|  * size.
 | |
|  * When the restart parameter is set, we sleep for ONE frame to allow the
 | |
|  * DSP time to get the new frame
 | |
|  */
 | |
| static int s2255_set_mode(struct s2255_vc *vc,
 | |
| 			  struct s2255_mode *mode)
 | |
| {
 | |
| 	int res;
 | |
| 	unsigned long chn_rev;
 | |
| 	struct s2255_dev *dev = to_s2255_dev(vc->vdev.v4l2_dev);
 | |
| 	int i;
 | |
| 	__le32 *buffer = dev->cmdbuf;
 | |
| 
 | |
| 	mutex_lock(&dev->cmdlock);
 | |
| 	chn_rev = G_chnmap[vc->idx];
 | |
| 	dprintk(dev, 3, "%s channel: %d\n", __func__, vc->idx);
 | |
| 	/* if JPEG, set the quality */
 | |
| 	if ((mode->color & MASK_COLOR) == COLOR_JPG) {
 | |
| 		mode->color &= ~MASK_COLOR;
 | |
| 		mode->color |= COLOR_JPG;
 | |
| 		mode->color &= ~MASK_JPG_QUALITY;
 | |
| 		mode->color |= (vc->jpegqual << 8);
 | |
| 	}
 | |
| 	/* save the mode */
 | |
| 	vc->mode = *mode;
 | |
| 	vc->req_image_size = get_transfer_size(mode);
 | |
| 	dprintk(dev, 1, "%s: reqsize %ld\n", __func__, vc->req_image_size);
 | |
| 	/* set the mode */
 | |
| 	buffer[0] = IN_DATA_TOKEN;
 | |
| 	buffer[1] = (__le32) cpu_to_le32(chn_rev);
 | |
| 	buffer[2] = CMD_SET_MODE;
 | |
| 	for (i = 0; i < sizeof(struct s2255_mode) / sizeof(u32); i++)
 | |
| 		buffer[3 + i] = cpu_to_le32(((u32 *)&vc->mode)[i]);
 | |
| 	vc->setmode_ready = 0;
 | |
| 	res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
 | |
| 	if (debug)
 | |
| 		s2255_print_cfg(dev, mode);
 | |
| 	/* wait at least 3 frames before continuing */
 | |
| 	if (mode->restart) {
 | |
| 		wait_event_timeout(vc->wait_setmode,
 | |
| 				   (vc->setmode_ready != 0),
 | |
| 				   msecs_to_jiffies(S2255_SETMODE_TIMEOUT));
 | |
| 		if (vc->setmode_ready != 1) {
 | |
| 			dprintk(dev, 0, "s2255: no set mode response\n");
 | |
| 			res = -EFAULT;
 | |
| 		}
 | |
| 	}
 | |
| 	/* clear the restart flag */
 | |
| 	vc->mode.restart = 0;
 | |
| 	dprintk(dev, 1, "%s chn %d, result: %d\n", __func__, vc->idx, res);
 | |
| 	mutex_unlock(&dev->cmdlock);
 | |
| 	return res;
 | |
| }
 | |
| 
 | |
| static int s2255_cmd_status(struct s2255_vc *vc, u32 *pstatus)
 | |
| {
 | |
| 	int res;
 | |
| 	u32 chn_rev;
 | |
| 	struct s2255_dev *dev = to_s2255_dev(vc->vdev.v4l2_dev);
 | |
| 	__le32 *buffer = dev->cmdbuf;
 | |
| 
 | |
| 	mutex_lock(&dev->cmdlock);
 | |
| 	chn_rev = G_chnmap[vc->idx];
 | |
| 	dprintk(dev, 4, "%s chan %d\n", __func__, vc->idx);
 | |
| 	/* form the get vid status command */
 | |
| 	buffer[0] = IN_DATA_TOKEN;
 | |
| 	buffer[1] = (__le32) cpu_to_le32(chn_rev);
 | |
| 	buffer[2] = CMD_STATUS;
 | |
| 	*pstatus = 0;
 | |
| 	vc->vidstatus_ready = 0;
 | |
| 	res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
 | |
| 	wait_event_timeout(vc->wait_vidstatus,
 | |
| 			   (vc->vidstatus_ready != 0),
 | |
| 			   msecs_to_jiffies(S2255_VIDSTATUS_TIMEOUT));
 | |
| 	if (vc->vidstatus_ready != 1) {
 | |
| 		dprintk(dev, 0, "s2255: no vidstatus response\n");
 | |
| 		res = -EFAULT;
 | |
| 	}
 | |
| 	*pstatus = vc->vidstatus;
 | |
| 	dprintk(dev, 4, "%s, vid status %d\n", __func__, *pstatus);
 | |
| 	mutex_unlock(&dev->cmdlock);
 | |
| 	return res;
 | |
| }
 | |
| 
 | |
| static int start_streaming(struct vb2_queue *vq, unsigned int count)
 | |
| {
 | |
| 	struct s2255_vc *vc = vb2_get_drv_priv(vq);
 | |
| 	int j;
 | |
| 
 | |
| 	vc->last_frame = -1;
 | |
| 	vc->bad_payload = 0;
 | |
| 	vc->cur_frame = 0;
 | |
| 	vc->frame_count = 0;
 | |
| 	for (j = 0; j < SYS_FRAMES; j++) {
 | |
| 		vc->buffer.frame[j].ulState = S2255_READ_IDLE;
 | |
| 		vc->buffer.frame[j].cur_size = 0;
 | |
| 	}
 | |
| 	return s2255_start_acquire(vc);
 | |
| }
 | |
| 
 | |
| /* abort streaming and wait for last buffer */
 | |
| static void stop_streaming(struct vb2_queue *vq)
 | |
| {
 | |
| 	struct s2255_vc *vc = vb2_get_drv_priv(vq);
 | |
| 	struct s2255_buffer *buf, *node;
 | |
| 	unsigned long flags;
 | |
| 	(void) s2255_stop_acquire(vc);
 | |
| 	spin_lock_irqsave(&vc->qlock, flags);
 | |
| 	list_for_each_entry_safe(buf, node, &vc->buf_list, list) {
 | |
| 		list_del(&buf->list);
 | |
| 		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
 | |
| 		dprintk(vc->dev, 2, "[%p/%d] done\n",
 | |
| 			buf, buf->vb.vb2_buf.index);
 | |
| 	}
 | |
| 	spin_unlock_irqrestore(&vc->qlock, flags);
 | |
| }
 | |
| 
 | |
| static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id i)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 	struct s2255_mode mode;
 | |
| 	struct vb2_queue *q = &vc->vb_vidq;
 | |
| 
 | |
| 	/*
 | |
| 	 * Changing the standard implies a format change, which is not allowed
 | |
| 	 * while buffers for use with streaming have already been allocated.
 | |
| 	 */
 | |
| 	if (vb2_is_busy(q))
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	mode = vc->mode;
 | |
| 	if (i & V4L2_STD_525_60) {
 | |
| 		dprintk(vc->dev, 4, "%s 60 Hz\n", __func__);
 | |
| 		/* if changing format, reset frame decimation/intervals */
 | |
| 		if (mode.format != FORMAT_NTSC) {
 | |
| 			mode.restart = 1;
 | |
| 			mode.format = FORMAT_NTSC;
 | |
| 			mode.fdec = FDEC_1;
 | |
| 			vc->width = LINE_SZ_4CIFS_NTSC;
 | |
| 			vc->height = NUM_LINES_4CIFS_NTSC * 2;
 | |
| 		}
 | |
| 	} else if (i & V4L2_STD_625_50) {
 | |
| 		dprintk(vc->dev, 4, "%s 50 Hz\n", __func__);
 | |
| 		if (mode.format != FORMAT_PAL) {
 | |
| 			mode.restart = 1;
 | |
| 			mode.format = FORMAT_PAL;
 | |
| 			mode.fdec = FDEC_1;
 | |
| 			vc->width = LINE_SZ_4CIFS_PAL;
 | |
| 			vc->height = NUM_LINES_4CIFS_PAL * 2;
 | |
| 		}
 | |
| 	} else
 | |
| 		return -EINVAL;
 | |
| 	vc->std = i;
 | |
| 	if (mode.restart)
 | |
| 		s2255_set_mode(vc, &mode);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *i)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 
 | |
| 	*i = vc->std;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Sensoray 2255 is a multiple channel capture device.
 | |
|    It does not have a "crossbar" of inputs.
 | |
|    We use one V4L device per channel. The user must
 | |
|    be aware that certain combinations are not allowed.
 | |
|    For instance, you cannot do full FPS on more than 2 channels(2 videodevs)
 | |
|    at once in color(you can do full fps on 4 channels with greyscale.
 | |
| */
 | |
| static int vidioc_enum_input(struct file *file, void *priv,
 | |
| 			     struct v4l2_input *inp)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 	struct s2255_dev *dev = vc->dev;
 | |
| 	u32 status = 0;
 | |
| 
 | |
| 	if (inp->index != 0)
 | |
| 		return -EINVAL;
 | |
| 	inp->type = V4L2_INPUT_TYPE_CAMERA;
 | |
| 	inp->std = S2255_NORMS;
 | |
| 	inp->status = 0;
 | |
| 	if (dev->dsp_fw_ver >= S2255_MIN_DSP_STATUS) {
 | |
| 		int rc;
 | |
| 		rc = s2255_cmd_status(vc, &status);
 | |
| 		dprintk(dev, 4, "s2255_cmd_status rc: %d status %x\n",
 | |
| 			rc, status);
 | |
| 		if (rc == 0)
 | |
| 			inp->status =  (status & 0x01) ? 0
 | |
| 				: V4L2_IN_ST_NO_SIGNAL;
 | |
| 	}
 | |
| 	switch (dev->pid) {
 | |
| 	case 0x2255:
 | |
| 	default:
 | |
| 		strlcpy(inp->name, "Composite", sizeof(inp->name));
 | |
| 		break;
 | |
| 	case 0x2257:
 | |
| 		strlcpy(inp->name, (vc->idx < 2) ? "Composite" : "S-Video",
 | |
| 			sizeof(inp->name));
 | |
| 		break;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
 | |
| {
 | |
| 	*i = 0;
 | |
| 	return 0;
 | |
| }
 | |
| static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 | |
| {
 | |
| 	if (i > 0)
 | |
| 		return -EINVAL;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int s2255_s_ctrl(struct v4l2_ctrl *ctrl)
 | |
| {
 | |
| 	struct s2255_vc *vc =
 | |
| 		container_of(ctrl->handler, struct s2255_vc, hdl);
 | |
| 	struct s2255_mode mode;
 | |
| 	mode = vc->mode;
 | |
| 	/* update the mode to the corresponding value */
 | |
| 	switch (ctrl->id) {
 | |
| 	case V4L2_CID_BRIGHTNESS:
 | |
| 		mode.bright = ctrl->val;
 | |
| 		break;
 | |
| 	case V4L2_CID_CONTRAST:
 | |
| 		mode.contrast = ctrl->val;
 | |
| 		break;
 | |
| 	case V4L2_CID_HUE:
 | |
| 		mode.hue = ctrl->val;
 | |
| 		break;
 | |
| 	case V4L2_CID_SATURATION:
 | |
| 		mode.saturation = ctrl->val;
 | |
| 		break;
 | |
| 	case V4L2_CID_S2255_COLORFILTER:
 | |
| 		mode.color &= ~MASK_INPUT_TYPE;
 | |
| 		mode.color |= !ctrl->val << 16;
 | |
| 		break;
 | |
| 	case V4L2_CID_JPEG_COMPRESSION_QUALITY:
 | |
| 		vc->jpegqual = ctrl->val;
 | |
| 		return 0;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	mode.restart = 0;
 | |
| 	/* set mode here.  Note: stream does not need restarted.
 | |
| 	   some V4L programs restart stream unnecessarily
 | |
| 	   after a s_crtl.
 | |
| 	*/
 | |
| 	s2255_set_mode(vc, &mode);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_g_jpegcomp(struct file *file, void *priv,
 | |
| 			 struct v4l2_jpegcompression *jc)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 
 | |
| 	memset(jc, 0, sizeof(*jc));
 | |
| 	jc->quality = vc->jpegqual;
 | |
| 	dprintk(vc->dev, 2, "%s: quality %d\n", __func__, jc->quality);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_s_jpegcomp(struct file *file, void *priv,
 | |
| 			 const struct v4l2_jpegcompression *jc)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 
 | |
| 	if (jc->quality < 0 || jc->quality > 100)
 | |
| 		return -EINVAL;
 | |
| 	v4l2_ctrl_s_ctrl(vc->jpegqual_ctrl, jc->quality);
 | |
| 	dprintk(vc->dev, 2, "%s: quality %d\n", __func__, jc->quality);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_g_parm(struct file *file, void *priv,
 | |
| 			 struct v4l2_streamparm *sp)
 | |
| {
 | |
| 	__u32 def_num, def_dem;
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 
 | |
| 	if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 | |
| 		return -EINVAL;
 | |
| 	sp->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
 | |
| 	sp->parm.capture.capturemode = vc->cap_parm.capturemode;
 | |
| 	sp->parm.capture.readbuffers = S2255_MIN_BUFS;
 | |
| 	def_num = (vc->mode.format == FORMAT_NTSC) ? 1001 : 1000;
 | |
| 	def_dem = (vc->mode.format == FORMAT_NTSC) ? 30000 : 25000;
 | |
| 	sp->parm.capture.timeperframe.denominator = def_dem;
 | |
| 	switch (vc->mode.fdec) {
 | |
| 	default:
 | |
| 	case FDEC_1:
 | |
| 		sp->parm.capture.timeperframe.numerator = def_num;
 | |
| 		break;
 | |
| 	case FDEC_2:
 | |
| 		sp->parm.capture.timeperframe.numerator = def_num * 2;
 | |
| 		break;
 | |
| 	case FDEC_3:
 | |
| 		sp->parm.capture.timeperframe.numerator = def_num * 3;
 | |
| 		break;
 | |
| 	case FDEC_5:
 | |
| 		sp->parm.capture.timeperframe.numerator = def_num * 5;
 | |
| 		break;
 | |
| 	}
 | |
| 	dprintk(vc->dev, 4, "%s capture mode, %d timeperframe %d/%d\n",
 | |
| 		__func__,
 | |
| 		sp->parm.capture.capturemode,
 | |
| 		sp->parm.capture.timeperframe.numerator,
 | |
| 		sp->parm.capture.timeperframe.denominator);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_s_parm(struct file *file, void *priv,
 | |
| 			 struct v4l2_streamparm *sp)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 	struct s2255_mode mode;
 | |
| 	int fdec = FDEC_1;
 | |
| 	__u32 def_num, def_dem;
 | |
| 	if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 | |
| 		return -EINVAL;
 | |
| 	mode = vc->mode;
 | |
| 	/* high quality capture mode requires a stream restart */
 | |
| 	if ((vc->cap_parm.capturemode != sp->parm.capture.capturemode)
 | |
| 	    && vb2_is_streaming(&vc->vb_vidq))
 | |
| 		return -EBUSY;
 | |
| 	def_num = (mode.format == FORMAT_NTSC) ? 1001 : 1000;
 | |
| 	def_dem = (mode.format == FORMAT_NTSC) ? 30000 : 25000;
 | |
| 	if (def_dem != sp->parm.capture.timeperframe.denominator)
 | |
| 		sp->parm.capture.timeperframe.numerator = def_num;
 | |
| 	else if (sp->parm.capture.timeperframe.numerator <= def_num)
 | |
| 		sp->parm.capture.timeperframe.numerator = def_num;
 | |
| 	else if (sp->parm.capture.timeperframe.numerator <= (def_num * 2)) {
 | |
| 		sp->parm.capture.timeperframe.numerator = def_num * 2;
 | |
| 		fdec = FDEC_2;
 | |
| 	} else if (sp->parm.capture.timeperframe.numerator <= (def_num * 3)) {
 | |
| 		sp->parm.capture.timeperframe.numerator = def_num * 3;
 | |
| 		fdec = FDEC_3;
 | |
| 	} else {
 | |
| 		sp->parm.capture.timeperframe.numerator = def_num * 5;
 | |
| 		fdec = FDEC_5;
 | |
| 	}
 | |
| 	mode.fdec = fdec;
 | |
| 	sp->parm.capture.timeperframe.denominator = def_dem;
 | |
| 	sp->parm.capture.readbuffers = S2255_MIN_BUFS;
 | |
| 	s2255_set_mode(vc, &mode);
 | |
| 	dprintk(vc->dev, 4, "%s capture mode, %d timeperframe %d/%d, fdec %d\n",
 | |
| 		__func__,
 | |
| 		sp->parm.capture.capturemode,
 | |
| 		sp->parm.capture.timeperframe.numerator,
 | |
| 		sp->parm.capture.timeperframe.denominator, fdec);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #define NUM_SIZE_ENUMS 3
 | |
| static const struct v4l2_frmsize_discrete ntsc_sizes[] = {
 | |
| 	{ 640, 480 },
 | |
| 	{ 640, 240 },
 | |
| 	{ 320, 240 },
 | |
| };
 | |
| static const struct v4l2_frmsize_discrete pal_sizes[] = {
 | |
| 	{ 704, 576 },
 | |
| 	{ 704, 288 },
 | |
| 	{ 352, 288 },
 | |
| };
 | |
| 
 | |
| static int vidioc_enum_framesizes(struct file *file, void *priv,
 | |
| 			    struct v4l2_frmsizeenum *fe)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 	int is_ntsc = vc->std & V4L2_STD_525_60;
 | |
| 	const struct s2255_fmt *fmt;
 | |
| 
 | |
| 	if (fe->index >= NUM_SIZE_ENUMS)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	fmt = format_by_fourcc(fe->pixel_format);
 | |
| 	if (fmt == NULL)
 | |
| 		return -EINVAL;
 | |
| 	fe->type = V4L2_FRMSIZE_TYPE_DISCRETE;
 | |
| 	fe->discrete = is_ntsc ?  ntsc_sizes[fe->index] : pal_sizes[fe->index];
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vidioc_enum_frameintervals(struct file *file, void *priv,
 | |
| 			    struct v4l2_frmivalenum *fe)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 	const struct s2255_fmt *fmt;
 | |
| 	const struct v4l2_frmsize_discrete *sizes;
 | |
| 	int is_ntsc = vc->std & V4L2_STD_525_60;
 | |
| #define NUM_FRAME_ENUMS 4
 | |
| 	int frm_dec[NUM_FRAME_ENUMS] = {1, 2, 3, 5};
 | |
| 	int i;
 | |
| 
 | |
| 	if (fe->index >= NUM_FRAME_ENUMS)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	fmt = format_by_fourcc(fe->pixel_format);
 | |
| 	if (fmt == NULL)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	sizes = is_ntsc ? ntsc_sizes : pal_sizes;
 | |
| 	for (i = 0; i < NUM_SIZE_ENUMS; i++, sizes++)
 | |
| 		if (fe->width == sizes->width &&
 | |
| 		    fe->height == sizes->height)
 | |
| 			break;
 | |
| 	if (i == NUM_SIZE_ENUMS)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	fe->type = V4L2_FRMIVAL_TYPE_DISCRETE;
 | |
| 	fe->discrete.denominator = is_ntsc ? 30000 : 25000;
 | |
| 	fe->discrete.numerator = (is_ntsc ? 1001 : 1000) * frm_dec[fe->index];
 | |
| 	dprintk(vc->dev, 4, "%s discrete %d/%d\n", __func__,
 | |
| 		fe->discrete.numerator,
 | |
| 		fe->discrete.denominator);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int s2255_open(struct file *file)
 | |
| {
 | |
| 	struct s2255_vc *vc = video_drvdata(file);
 | |
| 	struct s2255_dev *dev = vc->dev;
 | |
| 	int state;
 | |
| 	int rc = 0;
 | |
| 
 | |
| 	rc = v4l2_fh_open(file);
 | |
| 	if (rc != 0)
 | |
| 		return rc;
 | |
| 
 | |
| 	dprintk(dev, 1, "s2255: %s\n", __func__);
 | |
| 	state = atomic_read(&dev->fw_data->fw_state);
 | |
| 	switch (state) {
 | |
| 	case S2255_FW_DISCONNECTING:
 | |
| 		return -ENODEV;
 | |
| 	case S2255_FW_FAILED:
 | |
| 		s2255_dev_err(&dev->udev->dev,
 | |
| 			"firmware load failed. retrying.\n");
 | |
| 		s2255_fwload_start(dev);
 | |
| 		wait_event_timeout(dev->fw_data->wait_fw,
 | |
| 				   ((atomic_read(&dev->fw_data->fw_state)
 | |
| 				     == S2255_FW_SUCCESS) ||
 | |
| 				    (atomic_read(&dev->fw_data->fw_state)
 | |
| 				     == S2255_FW_DISCONNECTING)),
 | |
| 				   msecs_to_jiffies(S2255_LOAD_TIMEOUT));
 | |
| 		/* state may have changed, re-read */
 | |
| 		state = atomic_read(&dev->fw_data->fw_state);
 | |
| 		break;
 | |
| 	case S2255_FW_NOTLOADED:
 | |
| 	case S2255_FW_LOADED_DSPWAIT:
 | |
| 		/* give S2255_LOAD_TIMEOUT time for firmware to load in case
 | |
| 		   driver loaded and then device immediately opened */
 | |
| 		pr_info("%s waiting for firmware load\n", __func__);
 | |
| 		wait_event_timeout(dev->fw_data->wait_fw,
 | |
| 				   ((atomic_read(&dev->fw_data->fw_state)
 | |
| 				     == S2255_FW_SUCCESS) ||
 | |
| 				    (atomic_read(&dev->fw_data->fw_state)
 | |
| 				     == S2255_FW_DISCONNECTING)),
 | |
| 				   msecs_to_jiffies(S2255_LOAD_TIMEOUT));
 | |
| 		/* state may have changed, re-read */
 | |
| 		state = atomic_read(&dev->fw_data->fw_state);
 | |
| 		break;
 | |
| 	case S2255_FW_SUCCESS:
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 	/* state may have changed in above switch statement */
 | |
| 	switch (state) {
 | |
| 	case S2255_FW_SUCCESS:
 | |
| 		break;
 | |
| 	case S2255_FW_FAILED:
 | |
| 		pr_info("2255 firmware load failed.\n");
 | |
| 		return -ENODEV;
 | |
| 	case S2255_FW_DISCONNECTING:
 | |
| 		pr_info("%s: disconnecting\n", __func__);
 | |
| 		return -ENODEV;
 | |
| 	case S2255_FW_LOADED_DSPWAIT:
 | |
| 	case S2255_FW_NOTLOADED:
 | |
| 		pr_info("%s: firmware not loaded, please retry\n",
 | |
| 			__func__);
 | |
| 		/*
 | |
| 		 * Timeout on firmware load means device unusable.
 | |
| 		 * Set firmware failure state.
 | |
| 		 * On next s2255_open the firmware will be reloaded.
 | |
| 		 */
 | |
| 		atomic_set(&dev->fw_data->fw_state,
 | |
| 			   S2255_FW_FAILED);
 | |
| 		return -EAGAIN;
 | |
| 	default:
 | |
| 		pr_info("%s: unknown state\n", __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (!vc->configured) {
 | |
| 		/* configure channel to default state */
 | |
| 		vc->fmt = &formats[0];
 | |
| 		s2255_set_mode(vc, &vc->mode);
 | |
| 		vc->configured = 1;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void s2255_destroy(struct s2255_dev *dev)
 | |
| {
 | |
| 	dprintk(dev, 1, "%s", __func__);
 | |
| 	/* board shutdown stops the read pipe if it is running */
 | |
| 	s2255_board_shutdown(dev);
 | |
| 	/* make sure firmware still not trying to load */
 | |
| 	del_timer_sync(&dev->timer);  /* only started in .probe and .open */
 | |
| 	if (dev->fw_data->fw_urb) {
 | |
| 		usb_kill_urb(dev->fw_data->fw_urb);
 | |
| 		usb_free_urb(dev->fw_data->fw_urb);
 | |
| 		dev->fw_data->fw_urb = NULL;
 | |
| 	}
 | |
| 	release_firmware(dev->fw_data->fw);
 | |
| 	kfree(dev->fw_data->pfw_data);
 | |
| 	kfree(dev->fw_data);
 | |
| 	/* reset the DSP so firmware can be reloaded next time */
 | |
| 	s2255_reset_dsppower(dev);
 | |
| 	mutex_destroy(&dev->lock);
 | |
| 	usb_put_dev(dev->udev);
 | |
| 	v4l2_device_unregister(&dev->v4l2_dev);
 | |
| 	kfree(dev->cmdbuf);
 | |
| 	kfree(dev);
 | |
| }
 | |
| 
 | |
| static const struct v4l2_file_operations s2255_fops_v4l = {
 | |
| 	.owner = THIS_MODULE,
 | |
| 	.open = s2255_open,
 | |
| 	.release = vb2_fop_release,
 | |
| 	.poll = vb2_fop_poll,
 | |
| 	.unlocked_ioctl = video_ioctl2,	/* V4L2 ioctl handler */
 | |
| 	.mmap = vb2_fop_mmap,
 | |
| 	.read = vb2_fop_read,
 | |
| };
 | |
| 
 | |
| static const struct v4l2_ioctl_ops s2255_ioctl_ops = {
 | |
| 	.vidioc_querycap = vidioc_querycap,
 | |
| 	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
 | |
| 	.vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
 | |
| 	.vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
 | |
| 	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
 | |
| 	.vidioc_reqbufs = vb2_ioctl_reqbufs,
 | |
| 	.vidioc_querybuf = vb2_ioctl_querybuf,
 | |
| 	.vidioc_qbuf = vb2_ioctl_qbuf,
 | |
| 	.vidioc_dqbuf = vb2_ioctl_dqbuf,
 | |
| 	.vidioc_s_std = vidioc_s_std,
 | |
| 	.vidioc_g_std = vidioc_g_std,
 | |
| 	.vidioc_enum_input = vidioc_enum_input,
 | |
| 	.vidioc_g_input = vidioc_g_input,
 | |
| 	.vidioc_s_input = vidioc_s_input,
 | |
| 	.vidioc_streamon = vb2_ioctl_streamon,
 | |
| 	.vidioc_streamoff = vb2_ioctl_streamoff,
 | |
| 	.vidioc_s_jpegcomp = vidioc_s_jpegcomp,
 | |
| 	.vidioc_g_jpegcomp = vidioc_g_jpegcomp,
 | |
| 	.vidioc_s_parm = vidioc_s_parm,
 | |
| 	.vidioc_g_parm = vidioc_g_parm,
 | |
| 	.vidioc_enum_framesizes = vidioc_enum_framesizes,
 | |
| 	.vidioc_enum_frameintervals = vidioc_enum_frameintervals,
 | |
| 	.vidioc_log_status  = v4l2_ctrl_log_status,
 | |
| 	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
 | |
| 	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
 | |
| };
 | |
| 
 | |
| static void s2255_video_device_release(struct video_device *vdev)
 | |
| {
 | |
| 	struct s2255_dev *dev = to_s2255_dev(vdev->v4l2_dev);
 | |
| 	struct s2255_vc *vc =
 | |
| 		container_of(vdev, struct s2255_vc, vdev);
 | |
| 
 | |
| 	dprintk(dev, 4, "%s, chnls: %d\n", __func__,
 | |
| 		atomic_read(&dev->num_channels));
 | |
| 
 | |
| 	v4l2_ctrl_handler_free(&vc->hdl);
 | |
| 
 | |
| 	if (atomic_dec_and_test(&dev->num_channels))
 | |
| 		s2255_destroy(dev);
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| static const struct video_device template = {
 | |
| 	.name = "s2255v",
 | |
| 	.fops = &s2255_fops_v4l,
 | |
| 	.ioctl_ops = &s2255_ioctl_ops,
 | |
| 	.release = s2255_video_device_release,
 | |
| 	.tvnorms = S2255_NORMS,
 | |
| };
 | |
| 
 | |
| static const struct v4l2_ctrl_ops s2255_ctrl_ops = {
 | |
| 	.s_ctrl = s2255_s_ctrl,
 | |
| };
 | |
| 
 | |
| static const struct v4l2_ctrl_config color_filter_ctrl = {
 | |
| 	.ops = &s2255_ctrl_ops,
 | |
| 	.name = "Color Filter",
 | |
| 	.id = V4L2_CID_S2255_COLORFILTER,
 | |
| 	.type = V4L2_CTRL_TYPE_BOOLEAN,
 | |
| 	.max = 1,
 | |
| 	.step = 1,
 | |
| 	.def = 1,
 | |
| };
 | |
| 
 | |
| static int s2255_probe_v4l(struct s2255_dev *dev)
 | |
| {
 | |
| 	int ret;
 | |
| 	int i;
 | |
| 	int cur_nr = video_nr;
 | |
| 	struct s2255_vc *vc;
 | |
| 	struct vb2_queue *q;
 | |
| 
 | |
| 	ret = v4l2_device_register(&dev->interface->dev, &dev->v4l2_dev);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 	/* initialize all video 4 linux */
 | |
| 	/* register 4 video devices */
 | |
| 	for (i = 0; i < MAX_CHANNELS; i++) {
 | |
| 		vc = &dev->vc[i];
 | |
| 		INIT_LIST_HEAD(&vc->buf_list);
 | |
| 
 | |
| 		v4l2_ctrl_handler_init(&vc->hdl, 6);
 | |
| 		v4l2_ctrl_new_std(&vc->hdl, &s2255_ctrl_ops,
 | |
| 				V4L2_CID_BRIGHTNESS, -127, 127, 1, DEF_BRIGHT);
 | |
| 		v4l2_ctrl_new_std(&vc->hdl, &s2255_ctrl_ops,
 | |
| 				V4L2_CID_CONTRAST, 0, 255, 1, DEF_CONTRAST);
 | |
| 		v4l2_ctrl_new_std(&vc->hdl, &s2255_ctrl_ops,
 | |
| 				V4L2_CID_SATURATION, 0, 255, 1, DEF_SATURATION);
 | |
| 		v4l2_ctrl_new_std(&vc->hdl, &s2255_ctrl_ops,
 | |
| 				V4L2_CID_HUE, 0, 255, 1, DEF_HUE);
 | |
| 		vc->jpegqual_ctrl = v4l2_ctrl_new_std(&vc->hdl,
 | |
| 				&s2255_ctrl_ops,
 | |
| 				V4L2_CID_JPEG_COMPRESSION_QUALITY,
 | |
| 				0, 100, 1, S2255_DEF_JPEG_QUAL);
 | |
| 		if (dev->dsp_fw_ver >= S2255_MIN_DSP_COLORFILTER &&
 | |
| 		    (dev->pid != 0x2257 || vc->idx <= 1))
 | |
| 			v4l2_ctrl_new_custom(&vc->hdl, &color_filter_ctrl,
 | |
| 					     NULL);
 | |
| 		if (vc->hdl.error) {
 | |
| 			ret = vc->hdl.error;
 | |
| 			v4l2_ctrl_handler_free(&vc->hdl);
 | |
| 			dev_err(&dev->udev->dev, "couldn't register control\n");
 | |
| 			break;
 | |
| 		}
 | |
| 		q = &vc->vb_vidq;
 | |
| 		q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 | |
| 		q->io_modes = VB2_MMAP | VB2_READ | VB2_USERPTR;
 | |
| 		q->drv_priv = vc;
 | |
| 		q->lock = &vc->vb_lock;
 | |
| 		q->buf_struct_size = sizeof(struct s2255_buffer);
 | |
| 		q->mem_ops = &vb2_vmalloc_memops;
 | |
| 		q->ops = &s2255_video_qops;
 | |
| 		q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
 | |
| 		ret = vb2_queue_init(q);
 | |
| 		if (ret != 0) {
 | |
| 			dev_err(&dev->udev->dev,
 | |
| 				"%s vb2_queue_init 0x%x\n", __func__, ret);
 | |
| 			break;
 | |
| 		}
 | |
| 		/* register video devices */
 | |
| 		vc->vdev = template;
 | |
| 		vc->vdev.queue = q;
 | |
| 		vc->vdev.ctrl_handler = &vc->hdl;
 | |
| 		vc->vdev.lock = &dev->lock;
 | |
| 		vc->vdev.v4l2_dev = &dev->v4l2_dev;
 | |
| 		video_set_drvdata(&vc->vdev, vc);
 | |
| 		if (video_nr == -1)
 | |
| 			ret = video_register_device(&vc->vdev,
 | |
| 						    VFL_TYPE_GRABBER,
 | |
| 						    video_nr);
 | |
| 		else
 | |
| 			ret = video_register_device(&vc->vdev,
 | |
| 						    VFL_TYPE_GRABBER,
 | |
| 						    cur_nr + i);
 | |
| 
 | |
| 		if (ret) {
 | |
| 			dev_err(&dev->udev->dev,
 | |
| 				"failed to register video device!\n");
 | |
| 			break;
 | |
| 		}
 | |
| 		atomic_inc(&dev->num_channels);
 | |
| 		v4l2_info(&dev->v4l2_dev, "V4L2 device registered as %s\n",
 | |
| 			  video_device_node_name(&vc->vdev));
 | |
| 
 | |
| 	}
 | |
| 	pr_info("Sensoray 2255 V4L driver Revision: %s\n",
 | |
| 		S2255_VERSION);
 | |
| 	/* if no channels registered, return error and probe will fail*/
 | |
| 	if (atomic_read(&dev->num_channels) == 0) {
 | |
| 		v4l2_device_unregister(&dev->v4l2_dev);
 | |
| 		return ret;
 | |
| 	}
 | |
| 	if (atomic_read(&dev->num_channels) != MAX_CHANNELS)
 | |
| 		pr_warn("s2255: Not all channels available.\n");
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* this function moves the usb stream read pipe data
 | |
|  * into the system buffers.
 | |
|  * returns 0 on success, EAGAIN if more data to process( call this
 | |
|  * function again).
 | |
|  *
 | |
|  * Received frame structure:
 | |
|  * bytes 0-3:  marker : 0x2255DA4AL (S2255_MARKER_FRAME)
 | |
|  * bytes 4-7:  channel: 0-3
 | |
|  * bytes 8-11: payload size:  size of the frame
 | |
|  * bytes 12-payloadsize+12:  frame data
 | |
|  */
 | |
| static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
 | |
| {
 | |
| 	char *pdest;
 | |
| 	u32 offset = 0;
 | |
| 	int bframe = 0;
 | |
| 	char *psrc;
 | |
| 	unsigned long copy_size;
 | |
| 	unsigned long size;
 | |
| 	s32 idx = -1;
 | |
| 	struct s2255_framei *frm;
 | |
| 	unsigned char *pdata;
 | |
| 	struct s2255_vc *vc;
 | |
| 	dprintk(dev, 100, "buffer to user\n");
 | |
| 	vc = &dev->vc[dev->cc];
 | |
| 	idx = vc->cur_frame;
 | |
| 	frm = &vc->buffer.frame[idx];
 | |
| 	if (frm->ulState == S2255_READ_IDLE) {
 | |
| 		int jj;
 | |
| 		unsigned int cc;
 | |
| 		__le32 *pdword; /*data from dsp is little endian */
 | |
| 		int payload;
 | |
| 		/* search for marker codes */
 | |
| 		pdata = (unsigned char *)pipe_info->transfer_buffer;
 | |
| 		pdword = (__le32 *)pdata;
 | |
| 		for (jj = 0; jj < (pipe_info->cur_transfer_size - 12); jj++) {
 | |
| 			switch (*pdword) {
 | |
| 			case S2255_MARKER_FRAME:
 | |
| 				dprintk(dev, 4, "marker @ offset: %d [%x %x]\n",
 | |
| 					jj, pdata[0], pdata[1]);
 | |
| 				offset = jj + PREFIX_SIZE;
 | |
| 				bframe = 1;
 | |
| 				cc = le32_to_cpu(pdword[1]);
 | |
| 				if (cc >= MAX_CHANNELS) {
 | |
| 					dprintk(dev, 0,
 | |
| 						"bad channel\n");
 | |
| 					return -EINVAL;
 | |
| 				}
 | |
| 				/* reverse it */
 | |
| 				dev->cc = G_chnmap[cc];
 | |
| 				vc = &dev->vc[dev->cc];
 | |
| 				payload =  le32_to_cpu(pdword[3]);
 | |
| 				if (payload > vc->req_image_size) {
 | |
| 					vc->bad_payload++;
 | |
| 					/* discard the bad frame */
 | |
| 					return -EINVAL;
 | |
| 				}
 | |
| 				vc->pkt_size = payload;
 | |
| 				vc->jpg_size = le32_to_cpu(pdword[4]);
 | |
| 				break;
 | |
| 			case S2255_MARKER_RESPONSE:
 | |
| 
 | |
| 				pdata += DEF_USB_BLOCK;
 | |
| 				jj += DEF_USB_BLOCK;
 | |
| 				if (le32_to_cpu(pdword[1]) >= MAX_CHANNELS)
 | |
| 					break;
 | |
| 				cc = G_chnmap[le32_to_cpu(pdword[1])];
 | |
| 				if (cc >= MAX_CHANNELS)
 | |
| 					break;
 | |
| 				vc = &dev->vc[cc];
 | |
| 				switch (pdword[2]) {
 | |
| 				case S2255_RESPONSE_SETMODE:
 | |
| 					/* check if channel valid */
 | |
| 					/* set mode ready */
 | |
| 					vc->setmode_ready = 1;
 | |
| 					wake_up(&vc->wait_setmode);
 | |
| 					dprintk(dev, 5, "setmode rdy %d\n", cc);
 | |
| 					break;
 | |
| 				case S2255_RESPONSE_FW:
 | |
| 					dev->chn_ready |= (1 << cc);
 | |
| 					if ((dev->chn_ready & 0x0f) != 0x0f)
 | |
| 						break;
 | |
| 					/* all channels ready */
 | |
| 					pr_info("s2255: fw loaded\n");
 | |
| 					atomic_set(&dev->fw_data->fw_state,
 | |
| 						   S2255_FW_SUCCESS);
 | |
| 					wake_up(&dev->fw_data->wait_fw);
 | |
| 					break;
 | |
| 				case S2255_RESPONSE_STATUS:
 | |
| 					vc->vidstatus = le32_to_cpu(pdword[3]);
 | |
| 					vc->vidstatus_ready = 1;
 | |
| 					wake_up(&vc->wait_vidstatus);
 | |
| 					dprintk(dev, 5, "vstat %x chan %d\n",
 | |
| 						le32_to_cpu(pdword[3]), cc);
 | |
| 					break;
 | |
| 				default:
 | |
| 					pr_info("s2255 unknown resp\n");
 | |
| 				}
 | |
| 				pdata++;
 | |
| 				break;
 | |
| 			default:
 | |
| 				pdata++;
 | |
| 				break;
 | |
| 			}
 | |
| 			if (bframe)
 | |
| 				break;
 | |
| 		} /* for */
 | |
| 		if (!bframe)
 | |
| 			return -EINVAL;
 | |
| 	}
 | |
| 	vc = &dev->vc[dev->cc];
 | |
| 	idx = vc->cur_frame;
 | |
| 	frm = &vc->buffer.frame[idx];
 | |
| 	/* search done.  now find out if should be acquiring on this channel */
 | |
| 	if (!vb2_is_streaming(&vc->vb_vidq)) {
 | |
| 		/* we found a frame, but this channel is turned off */
 | |
| 		frm->ulState = S2255_READ_IDLE;
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (frm->ulState == S2255_READ_IDLE) {
 | |
| 		frm->ulState = S2255_READ_FRAME;
 | |
| 		frm->cur_size = 0;
 | |
| 	}
 | |
| 
 | |
| 	/* skip the marker 512 bytes (and offset if out of sync) */
 | |
| 	psrc = (u8 *)pipe_info->transfer_buffer + offset;
 | |
| 
 | |
| 
 | |
| 	if (frm->lpvbits == NULL) {
 | |
| 		dprintk(dev, 1, "s2255 frame buffer == NULL.%p %p %d %d",
 | |
| 			frm, dev, dev->cc, idx);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	pdest = frm->lpvbits + frm->cur_size;
 | |
| 
 | |
| 	copy_size = (pipe_info->cur_transfer_size - offset);
 | |
| 
 | |
| 	size = vc->pkt_size - PREFIX_SIZE;
 | |
| 
 | |
| 	/* sanity check on pdest */
 | |
| 	if ((copy_size + frm->cur_size) < vc->req_image_size)
 | |
| 		memcpy(pdest, psrc, copy_size);
 | |
| 
 | |
| 	frm->cur_size += copy_size;
 | |
| 	dprintk(dev, 4, "cur_size: %lu, size: %lu\n", frm->cur_size, size);
 | |
| 
 | |
| 	if (frm->cur_size >= size) {
 | |
| 		dprintk(dev, 2, "******[%d]Buffer[%d]full*******\n",
 | |
| 			dev->cc, idx);
 | |
| 		vc->last_frame = vc->cur_frame;
 | |
| 		vc->cur_frame++;
 | |
| 		/* end of system frame ring buffer, start at zero */
 | |
| 		if ((vc->cur_frame == SYS_FRAMES) ||
 | |
| 		    (vc->cur_frame == vc->buffer.dwFrames))
 | |
| 			vc->cur_frame = 0;
 | |
| 		/* frame ready */
 | |
| 		if (vb2_is_streaming(&vc->vb_vidq))
 | |
| 			s2255_got_frame(vc, vc->jpg_size);
 | |
| 		vc->frame_count++;
 | |
| 		frm->ulState = S2255_READ_IDLE;
 | |
| 		frm->cur_size = 0;
 | |
| 
 | |
| 	}
 | |
| 	/* done successfully */
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void s2255_read_video_callback(struct s2255_dev *dev,
 | |
| 				      struct s2255_pipeinfo *pipe_info)
 | |
| {
 | |
| 	int res;
 | |
| 	dprintk(dev, 50, "callback read video\n");
 | |
| 
 | |
| 	if (dev->cc >= MAX_CHANNELS) {
 | |
| 		dev->cc = 0;
 | |
| 		dev_err(&dev->udev->dev, "invalid channel\n");
 | |
| 		return;
 | |
| 	}
 | |
| 	/* otherwise copy to the system buffers */
 | |
| 	res = save_frame(dev, pipe_info);
 | |
| 	if (res != 0)
 | |
| 		dprintk(dev, 4, "s2255: read callback failed\n");
 | |
| 
 | |
| 	dprintk(dev, 50, "callback read video done\n");
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| static long s2255_vendor_req(struct s2255_dev *dev, unsigned char Request,
 | |
| 			     u16 Index, u16 Value, void *TransferBuffer,
 | |
| 			     s32 TransferBufferLength, int bOut)
 | |
| {
 | |
| 	int r;
 | |
| 	unsigned char *buf;
 | |
| 
 | |
| 	buf = kmalloc(TransferBufferLength, GFP_KERNEL);
 | |
| 	if (!buf)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	if (!bOut) {
 | |
| 		r = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
 | |
| 				    Request,
 | |
| 				    USB_TYPE_VENDOR | USB_RECIP_DEVICE |
 | |
| 				    USB_DIR_IN,
 | |
| 				    Value, Index, buf,
 | |
| 				    TransferBufferLength, HZ * 5);
 | |
| 
 | |
| 		if (r >= 0)
 | |
| 			memcpy(TransferBuffer, buf, TransferBufferLength);
 | |
| 	} else {
 | |
| 		memcpy(buf, TransferBuffer, TransferBufferLength);
 | |
| 		r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
 | |
| 				    Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 | |
| 				    Value, Index, buf,
 | |
| 				    TransferBufferLength, HZ * 5);
 | |
| 	}
 | |
| 	kfree(buf);
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * retrieve FX2 firmware version. future use.
 | |
|  * @param dev pointer to device extension
 | |
|  * @return -1 for fail, else returns firmware version as an int(16 bits)
 | |
|  */
 | |
| static int s2255_get_fx2fw(struct s2255_dev *dev)
 | |
| {
 | |
| 	int fw;
 | |
| 	int ret;
 | |
| 	unsigned char transBuffer[64];
 | |
| 	ret = s2255_vendor_req(dev, S2255_VR_FW, 0, 0, transBuffer, 2,
 | |
| 			       S2255_VR_IN);
 | |
| 	if (ret < 0)
 | |
| 		dprintk(dev, 2, "get fw error: %x\n", ret);
 | |
| 	fw = transBuffer[0] + (transBuffer[1] << 8);
 | |
| 	dprintk(dev, 2, "Get FW %x %x\n", transBuffer[0], transBuffer[1]);
 | |
| 	return fw;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Create the system ring buffer to copy frames into from the
 | |
|  * usb read pipe.
 | |
|  */
 | |
| static int s2255_create_sys_buffers(struct s2255_vc *vc)
 | |
| {
 | |
| 	unsigned long i;
 | |
| 	unsigned long reqsize;
 | |
| 	vc->buffer.dwFrames = SYS_FRAMES;
 | |
| 	/* always allocate maximum size(PAL) for system buffers */
 | |
| 	reqsize = SYS_FRAMES_MAXSIZE;
 | |
| 
 | |
| 	if (reqsize > SYS_FRAMES_MAXSIZE)
 | |
| 		reqsize = SYS_FRAMES_MAXSIZE;
 | |
| 
 | |
| 	for (i = 0; i < SYS_FRAMES; i++) {
 | |
| 		/* allocate the frames */
 | |
| 		vc->buffer.frame[i].lpvbits = vmalloc(reqsize);
 | |
| 		vc->buffer.frame[i].size = reqsize;
 | |
| 		if (vc->buffer.frame[i].lpvbits == NULL) {
 | |
| 			pr_info("out of memory.  using less frames\n");
 | |
| 			vc->buffer.dwFrames = i;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* make sure internal states are set */
 | |
| 	for (i = 0; i < SYS_FRAMES; i++) {
 | |
| 		vc->buffer.frame[i].ulState = 0;
 | |
| 		vc->buffer.frame[i].cur_size = 0;
 | |
| 	}
 | |
| 
 | |
| 	vc->cur_frame = 0;
 | |
| 	vc->last_frame = -1;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int s2255_release_sys_buffers(struct s2255_vc *vc)
 | |
| {
 | |
| 	unsigned long i;
 | |
| 	for (i = 0; i < SYS_FRAMES; i++) {
 | |
| 		vfree(vc->buffer.frame[i].lpvbits);
 | |
| 		vc->buffer.frame[i].lpvbits = NULL;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int s2255_board_init(struct s2255_dev *dev)
 | |
| {
 | |
| 	struct s2255_mode mode_def = DEF_MODEI_NTSC_CONT;
 | |
| 	int fw_ver;
 | |
| 	int j;
 | |
| 	struct s2255_pipeinfo *pipe = &dev->pipe;
 | |
| 	dprintk(dev, 4, "board init: %p", dev);
 | |
| 	memset(pipe, 0, sizeof(*pipe));
 | |
| 	pipe->dev = dev;
 | |
| 	pipe->cur_transfer_size = S2255_USB_XFER_SIZE;
 | |
| 	pipe->max_transfer_size = S2255_USB_XFER_SIZE;
 | |
| 
 | |
| 	pipe->transfer_buffer = kzalloc(pipe->max_transfer_size,
 | |
| 					GFP_KERNEL);
 | |
| 	if (pipe->transfer_buffer == NULL) {
 | |
| 		dprintk(dev, 1, "out of memory!\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 	/* query the firmware */
 | |
| 	fw_ver = s2255_get_fx2fw(dev);
 | |
| 
 | |
| 	pr_info("s2255: usb firmware version %d.%d\n",
 | |
| 		(fw_ver >> 8) & 0xff,
 | |
| 		fw_ver & 0xff);
 | |
| 
 | |
| 	if (fw_ver < S2255_CUR_USB_FWVER)
 | |
| 		pr_info("s2255: newer USB firmware available\n");
 | |
| 
 | |
| 	for (j = 0; j < MAX_CHANNELS; j++) {
 | |
| 		struct s2255_vc *vc = &dev->vc[j];
 | |
| 		vc->mode = mode_def;
 | |
| 		if (dev->pid == 0x2257 && j > 1)
 | |
| 			vc->mode.color |= (1 << 16);
 | |
| 		vc->jpegqual = S2255_DEF_JPEG_QUAL;
 | |
| 		vc->width = LINE_SZ_4CIFS_NTSC;
 | |
| 		vc->height = NUM_LINES_4CIFS_NTSC * 2;
 | |
| 		vc->std = V4L2_STD_NTSC_M;
 | |
| 		vc->fmt = &formats[0];
 | |
| 		vc->mode.restart = 1;
 | |
| 		vc->req_image_size = get_transfer_size(&mode_def);
 | |
| 		vc->frame_count = 0;
 | |
| 		/* create the system buffers */
 | |
| 		s2255_create_sys_buffers(vc);
 | |
| 	}
 | |
| 	/* start read pipe */
 | |
| 	s2255_start_readpipe(dev);
 | |
| 	dprintk(dev, 1, "%s: success\n", __func__);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int s2255_board_shutdown(struct s2255_dev *dev)
 | |
| {
 | |
| 	u32 i;
 | |
| 	dprintk(dev, 1, "%s: dev: %p", __func__,  dev);
 | |
| 
 | |
| 	for (i = 0; i < MAX_CHANNELS; i++) {
 | |
| 		if (vb2_is_streaming(&dev->vc[i].vb_vidq))
 | |
| 			s2255_stop_acquire(&dev->vc[i]);
 | |
| 	}
 | |
| 	s2255_stop_readpipe(dev);
 | |
| 	for (i = 0; i < MAX_CHANNELS; i++)
 | |
| 		s2255_release_sys_buffers(&dev->vc[i]);
 | |
| 	/* release transfer buffer */
 | |
| 	kfree(dev->pipe.transfer_buffer);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void read_pipe_completion(struct urb *purb)
 | |
| {
 | |
| 	struct s2255_pipeinfo *pipe_info;
 | |
| 	struct s2255_dev *dev;
 | |
| 	int status;
 | |
| 	int pipe;
 | |
| 	pipe_info = purb->context;
 | |
| 	if (pipe_info == NULL) {
 | |
| 		dev_err(&purb->dev->dev, "no context!\n");
 | |
| 		return;
 | |
| 	}
 | |
| 	dev = pipe_info->dev;
 | |
| 	if (dev == NULL) {
 | |
| 		dev_err(&purb->dev->dev, "no context!\n");
 | |
| 		return;
 | |
| 	}
 | |
| 	status = purb->status;
 | |
| 	/* if shutting down, do not resubmit, exit immediately */
 | |
| 	if (status == -ESHUTDOWN) {
 | |
| 		dprintk(dev, 2, "%s: err shutdown\n", __func__);
 | |
| 		pipe_info->err_count++;
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	if (pipe_info->state == 0) {
 | |
| 		dprintk(dev, 2, "%s: exiting USB pipe", __func__);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	if (status == 0)
 | |
| 		s2255_read_video_callback(dev, pipe_info);
 | |
| 	else {
 | |
| 		pipe_info->err_count++;
 | |
| 		dprintk(dev, 1, "%s: failed URB %d\n", __func__, status);
 | |
| 	}
 | |
| 
 | |
| 	pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint);
 | |
| 	/* reuse urb */
 | |
| 	usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev,
 | |
| 			  pipe,
 | |
| 			  pipe_info->transfer_buffer,
 | |
| 			  pipe_info->cur_transfer_size,
 | |
| 			  read_pipe_completion, pipe_info);
 | |
| 
 | |
| 	if (pipe_info->state != 0) {
 | |
| 		if (usb_submit_urb(pipe_info->stream_urb, GFP_ATOMIC))
 | |
| 			dev_err(&dev->udev->dev, "error submitting urb\n");
 | |
| 	} else {
 | |
| 		dprintk(dev, 2, "%s :complete state 0\n", __func__);
 | |
| 	}
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| static int s2255_start_readpipe(struct s2255_dev *dev)
 | |
| {
 | |
| 	int pipe;
 | |
| 	int retval;
 | |
| 	struct s2255_pipeinfo *pipe_info = &dev->pipe;
 | |
| 	pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint);
 | |
| 	dprintk(dev, 2, "%s: IN %d\n", __func__, dev->read_endpoint);
 | |
| 	pipe_info->state = 1;
 | |
| 	pipe_info->err_count = 0;
 | |
| 	pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL);
 | |
| 	if (!pipe_info->stream_urb)
 | |
| 		return -ENOMEM;
 | |
| 	/* transfer buffer allocated in board_init */
 | |
| 	usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev,
 | |
| 			  pipe,
 | |
| 			  pipe_info->transfer_buffer,
 | |
| 			  pipe_info->cur_transfer_size,
 | |
| 			  read_pipe_completion, pipe_info);
 | |
| 	retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL);
 | |
| 	if (retval) {
 | |
| 		pr_err("s2255: start read pipe failed\n");
 | |
| 		return retval;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* starts acquisition process */
 | |
| static int s2255_start_acquire(struct s2255_vc *vc)
 | |
| {
 | |
| 	int res;
 | |
| 	unsigned long chn_rev;
 | |
| 	int j;
 | |
| 	struct s2255_dev *dev = to_s2255_dev(vc->vdev.v4l2_dev);
 | |
| 	__le32 *buffer = dev->cmdbuf;
 | |
| 
 | |
| 	mutex_lock(&dev->cmdlock);
 | |
| 	chn_rev = G_chnmap[vc->idx];
 | |
| 	vc->last_frame = -1;
 | |
| 	vc->bad_payload = 0;
 | |
| 	vc->cur_frame = 0;
 | |
| 	for (j = 0; j < SYS_FRAMES; j++) {
 | |
| 		vc->buffer.frame[j].ulState = 0;
 | |
| 		vc->buffer.frame[j].cur_size = 0;
 | |
| 	}
 | |
| 
 | |
| 	/* send the start command */
 | |
| 	buffer[0] = IN_DATA_TOKEN;
 | |
| 	buffer[1] = (__le32) cpu_to_le32(chn_rev);
 | |
| 	buffer[2] = CMD_START;
 | |
| 	res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
 | |
| 	if (res != 0)
 | |
| 		dev_err(&dev->udev->dev, "CMD_START error\n");
 | |
| 
 | |
| 	dprintk(dev, 2, "start acquire exit[%d] %d\n", vc->idx, res);
 | |
| 	mutex_unlock(&dev->cmdlock);
 | |
| 	return res;
 | |
| }
 | |
| 
 | |
| static int s2255_stop_acquire(struct s2255_vc *vc)
 | |
| {
 | |
| 	int res;
 | |
| 	unsigned long chn_rev;
 | |
| 	struct s2255_dev *dev = to_s2255_dev(vc->vdev.v4l2_dev);
 | |
| 	__le32 *buffer = dev->cmdbuf;
 | |
| 
 | |
| 	mutex_lock(&dev->cmdlock);
 | |
| 	chn_rev = G_chnmap[vc->idx];
 | |
| 	/* send the stop command */
 | |
| 	buffer[0] = IN_DATA_TOKEN;
 | |
| 	buffer[1] = (__le32) cpu_to_le32(chn_rev);
 | |
| 	buffer[2] = CMD_STOP;
 | |
| 
 | |
| 	res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
 | |
| 	if (res != 0)
 | |
| 		dev_err(&dev->udev->dev, "CMD_STOP error\n");
 | |
| 
 | |
| 	dprintk(dev, 4, "%s: chn %d, res %d\n", __func__, vc->idx, res);
 | |
| 	mutex_unlock(&dev->cmdlock);
 | |
| 	return res;
 | |
| }
 | |
| 
 | |
| static void s2255_stop_readpipe(struct s2255_dev *dev)
 | |
| {
 | |
| 	struct s2255_pipeinfo *pipe = &dev->pipe;
 | |
| 
 | |
| 	pipe->state = 0;
 | |
| 	if (pipe->stream_urb) {
 | |
| 		/* cancel urb */
 | |
| 		usb_kill_urb(pipe->stream_urb);
 | |
| 		usb_free_urb(pipe->stream_urb);
 | |
| 		pipe->stream_urb = NULL;
 | |
| 	}
 | |
| 	dprintk(dev, 4, "%s", __func__);
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| static void s2255_fwload_start(struct s2255_dev *dev)
 | |
| {
 | |
| 	s2255_reset_dsppower(dev);
 | |
| 	dev->fw_data->fw_size = dev->fw_data->fw->size;
 | |
| 	atomic_set(&dev->fw_data->fw_state, S2255_FW_NOTLOADED);
 | |
| 	memcpy(dev->fw_data->pfw_data,
 | |
| 	       dev->fw_data->fw->data, CHUNK_SIZE);
 | |
| 	dev->fw_data->fw_loaded = CHUNK_SIZE;
 | |
| 	usb_fill_bulk_urb(dev->fw_data->fw_urb, dev->udev,
 | |
| 			  usb_sndbulkpipe(dev->udev, 2),
 | |
| 			  dev->fw_data->pfw_data,
 | |
| 			  CHUNK_SIZE, s2255_fwchunk_complete,
 | |
| 			  dev->fw_data);
 | |
| 	mod_timer(&dev->timer, jiffies + HZ);
 | |
| }
 | |
| 
 | |
| /* standard usb probe function */
 | |
| static int s2255_probe(struct usb_interface *interface,
 | |
| 		       const struct usb_device_id *id)
 | |
| {
 | |
| 	struct s2255_dev *dev = NULL;
 | |
| 	struct usb_host_interface *iface_desc;
 | |
| 	struct usb_endpoint_descriptor *endpoint;
 | |
| 	int i;
 | |
| 	int retval = -ENOMEM;
 | |
| 	__le32 *pdata;
 | |
| 	int fw_size;
 | |
| 
 | |
| 	/* allocate memory for our device state and initialize it to zero */
 | |
| 	dev = kzalloc(sizeof(struct s2255_dev), GFP_KERNEL);
 | |
| 	if (dev == NULL) {
 | |
| 		s2255_dev_err(&interface->dev, "out of memory\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	dev->cmdbuf = kzalloc(S2255_CMDBUF_SIZE, GFP_KERNEL);
 | |
| 	if (dev->cmdbuf == NULL) {
 | |
| 		s2255_dev_err(&interface->dev, "out of memory\n");
 | |
| 		goto errorFWDATA1;
 | |
| 	}
 | |
| 
 | |
| 	atomic_set(&dev->num_channels, 0);
 | |
| 	dev->pid = id->idProduct;
 | |
| 	dev->fw_data = kzalloc(sizeof(struct s2255_fw), GFP_KERNEL);
 | |
| 	if (!dev->fw_data)
 | |
| 		goto errorFWDATA1;
 | |
| 	mutex_init(&dev->lock);
 | |
| 	mutex_init(&dev->cmdlock);
 | |
| 	/* grab usb_device and save it */
 | |
| 	dev->udev = usb_get_dev(interface_to_usbdev(interface));
 | |
| 	if (dev->udev == NULL) {
 | |
| 		dev_err(&interface->dev, "null usb device\n");
 | |
| 		retval = -ENODEV;
 | |
| 		goto errorUDEV;
 | |
| 	}
 | |
| 	dev_dbg(&interface->dev, "dev: %p, udev %p interface %p\n",
 | |
| 		dev, dev->udev, interface);
 | |
| 	dev->interface = interface;
 | |
| 	/* set up the endpoint information  */
 | |
| 	iface_desc = interface->cur_altsetting;
 | |
| 	dev_dbg(&interface->dev, "num EP: %d\n",
 | |
| 		iface_desc->desc.bNumEndpoints);
 | |
| 	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 | |
| 		endpoint = &iface_desc->endpoint[i].desc;
 | |
| 		if (!dev->read_endpoint && usb_endpoint_is_bulk_in(endpoint)) {
 | |
| 			/* we found the bulk in endpoint */
 | |
| 			dev->read_endpoint = endpoint->bEndpointAddress;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (!dev->read_endpoint) {
 | |
| 		dev_err(&interface->dev, "Could not find bulk-in endpoint\n");
 | |
| 		goto errorEP;
 | |
| 	}
 | |
| 	timer_setup(&dev->timer, s2255_timer, 0);
 | |
| 	init_waitqueue_head(&dev->fw_data->wait_fw);
 | |
| 	for (i = 0; i < MAX_CHANNELS; i++) {
 | |
| 		struct s2255_vc *vc = &dev->vc[i];
 | |
| 		vc->idx = i;
 | |
| 		vc->dev = dev;
 | |
| 		init_waitqueue_head(&vc->wait_setmode);
 | |
| 		init_waitqueue_head(&vc->wait_vidstatus);
 | |
| 		spin_lock_init(&vc->qlock);
 | |
| 		mutex_init(&vc->vb_lock);
 | |
| 	}
 | |
| 
 | |
| 	dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL);
 | |
| 	if (!dev->fw_data->fw_urb)
 | |
| 		goto errorFWURB;
 | |
| 
 | |
| 	dev->fw_data->pfw_data = kzalloc(CHUNK_SIZE, GFP_KERNEL);
 | |
| 	if (!dev->fw_data->pfw_data) {
 | |
| 		dev_err(&interface->dev, "out of memory!\n");
 | |
| 		goto errorFWDATA2;
 | |
| 	}
 | |
| 	/* load the first chunk */
 | |
| 	if (request_firmware(&dev->fw_data->fw,
 | |
| 			     FIRMWARE_FILE_NAME, &dev->udev->dev)) {
 | |
| 		dev_err(&interface->dev, "sensoray 2255 failed to get firmware\n");
 | |
| 		goto errorREQFW;
 | |
| 	}
 | |
| 	/* check the firmware is valid */
 | |
| 	fw_size = dev->fw_data->fw->size;
 | |
| 	pdata = (__le32 *) &dev->fw_data->fw->data[fw_size - 8];
 | |
| 
 | |
| 	if (*pdata != S2255_FW_MARKER) {
 | |
| 		dev_err(&interface->dev, "Firmware invalid.\n");
 | |
| 		retval = -ENODEV;
 | |
| 		goto errorFWMARKER;
 | |
| 	} else {
 | |
| 		/* make sure firmware is the latest */
 | |
| 		__le32 *pRel;
 | |
| 		pRel = (__le32 *) &dev->fw_data->fw->data[fw_size - 4];
 | |
| 		pr_info("s2255 dsp fw version %x\n", le32_to_cpu(*pRel));
 | |
| 		dev->dsp_fw_ver = le32_to_cpu(*pRel);
 | |
| 		if (dev->dsp_fw_ver < S2255_CUR_DSP_FWVER)
 | |
| 			pr_info("s2255: f2255usb.bin out of date.\n");
 | |
| 		if (dev->pid == 0x2257 &&
 | |
| 				dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER)
 | |
| 			pr_warn("2257 needs firmware %d or above.\n",
 | |
| 				S2255_MIN_DSP_COLORFILTER);
 | |
| 	}
 | |
| 	usb_reset_device(dev->udev);
 | |
| 	/* load 2255 board specific */
 | |
| 	retval = s2255_board_init(dev);
 | |
| 	if (retval)
 | |
| 		goto errorBOARDINIT;
 | |
| 	s2255_fwload_start(dev);
 | |
| 	/* loads v4l specific */
 | |
| 	retval = s2255_probe_v4l(dev);
 | |
| 	if (retval)
 | |
| 		goto errorBOARDINIT;
 | |
| 	dev_info(&interface->dev, "Sensoray 2255 detected\n");
 | |
| 	return 0;
 | |
| errorBOARDINIT:
 | |
| 	s2255_board_shutdown(dev);
 | |
| errorFWMARKER:
 | |
| 	release_firmware(dev->fw_data->fw);
 | |
| errorREQFW:
 | |
| 	kfree(dev->fw_data->pfw_data);
 | |
| errorFWDATA2:
 | |
| 	usb_free_urb(dev->fw_data->fw_urb);
 | |
| errorFWURB:
 | |
| 	del_timer_sync(&dev->timer);
 | |
| errorEP:
 | |
| 	usb_put_dev(dev->udev);
 | |
| errorUDEV:
 | |
| 	kfree(dev->fw_data);
 | |
| 	mutex_destroy(&dev->lock);
 | |
| errorFWDATA1:
 | |
| 	kfree(dev->cmdbuf);
 | |
| 	kfree(dev);
 | |
| 	pr_warn("Sensoray 2255 driver load failed: 0x%x\n", retval);
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| /* disconnect routine. when board is removed physically or with rmmod */
 | |
| static void s2255_disconnect(struct usb_interface *interface)
 | |
| {
 | |
| 	struct s2255_dev *dev = to_s2255_dev(usb_get_intfdata(interface));
 | |
| 	int i;
 | |
| 	int channels = atomic_read(&dev->num_channels);
 | |
| 	mutex_lock(&dev->lock);
 | |
| 	v4l2_device_disconnect(&dev->v4l2_dev);
 | |
| 	mutex_unlock(&dev->lock);
 | |
| 	/*see comments in the uvc_driver.c usb disconnect function */
 | |
| 	atomic_inc(&dev->num_channels);
 | |
| 	/* unregister each video device. */
 | |
| 	for (i = 0; i < channels; i++)
 | |
| 		video_unregister_device(&dev->vc[i].vdev);
 | |
| 	/* wake up any of our timers */
 | |
| 	atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING);
 | |
| 	wake_up(&dev->fw_data->wait_fw);
 | |
| 	for (i = 0; i < MAX_CHANNELS; i++) {
 | |
| 		dev->vc[i].setmode_ready = 1;
 | |
| 		wake_up(&dev->vc[i].wait_setmode);
 | |
| 		dev->vc[i].vidstatus_ready = 1;
 | |
| 		wake_up(&dev->vc[i].wait_vidstatus);
 | |
| 	}
 | |
| 	if (atomic_dec_and_test(&dev->num_channels))
 | |
| 		s2255_destroy(dev);
 | |
| 	dev_info(&interface->dev, "%s\n", __func__);
 | |
| }
 | |
| 
 | |
| static struct usb_driver s2255_driver = {
 | |
| 	.name = S2255_DRIVER_NAME,
 | |
| 	.probe = s2255_probe,
 | |
| 	.disconnect = s2255_disconnect,
 | |
| 	.id_table = s2255_table,
 | |
| };
 | |
| 
 | |
| module_usb_driver(s2255_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("Sensoray 2255 Video for Linux driver");
 | |
| MODULE_AUTHOR("Dean Anderson (Sensoray Company Inc.)");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_VERSION(S2255_VERSION);
 | |
| MODULE_FIRMWARE(FIRMWARE_FILE_NAME);
 | 
