1027 lines
		
	
	
		
			26 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1027 lines
		
	
	
		
			26 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Copyright (C) 2010 Juergen Beisert, Pengutronix
 | |
|  *
 | |
|  * This code is based on:
 | |
|  * Author: Vitaly Wool <vital@embeddedalley.com>
 | |
|  *
 | |
|  * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
 | |
|  * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or
 | |
|  * modify it under the terms of the GNU General Public License
 | |
|  * as published by the Free Software Foundation; either version 2
 | |
|  * of the License, or (at your option) any later version.
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  */
 | |
| 
 | |
| #define DRIVER_NAME "mxsfb"
 | |
| 
 | |
| /**
 | |
|  * @file
 | |
|  * @brief LCDIF driver for i.MX23 and i.MX28
 | |
|  *
 | |
|  * The LCDIF support four modes of operation
 | |
|  * - MPU interface (to drive smart displays) -> not supported yet
 | |
|  * - VSYNC interface (like MPU interface plus Vsync) -> not supported yet
 | |
|  * - Dotclock interface (to drive LC displays with RGB data and sync signals)
 | |
|  * - DVI (to drive ITU-R BT656)  -> not supported yet
 | |
|  *
 | |
|  * This driver depends on a correct setup of the pins used for this purpose
 | |
|  * (platform specific).
 | |
|  *
 | |
|  * For the developer: Don't forget to set the data bus width to the display
 | |
|  * in the imx_fb_videomode structure. You will else end up with ugly colours.
 | |
|  * If you fight against jitter you can vary the clock delay. This is a feature
 | |
|  * of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give
 | |
|  * the required value in the imx_fb_videomode structure.
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/of_device.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/clk.h>
 | |
| #include <linux/dma-mapping.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/fb.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| #include <video/of_display_timing.h>
 | |
| #include <video/of_videomode.h>
 | |
| #include <video/videomode.h>
 | |
| 
 | |
| #define REG_SET	4
 | |
| #define REG_CLR	8
 | |
| 
 | |
| #define LCDC_CTRL			0x00
 | |
| #define LCDC_CTRL1			0x10
 | |
| #define LCDC_V4_CTRL2			0x20
 | |
| #define LCDC_V3_TRANSFER_COUNT		0x20
 | |
| #define LCDC_V4_TRANSFER_COUNT		0x30
 | |
| #define LCDC_V4_CUR_BUF			0x40
 | |
| #define LCDC_V4_NEXT_BUF		0x50
 | |
| #define LCDC_V3_CUR_BUF			0x30
 | |
| #define LCDC_V3_NEXT_BUF		0x40
 | |
| #define LCDC_TIMING			0x60
 | |
| #define LCDC_VDCTRL0			0x70
 | |
| #define LCDC_VDCTRL1			0x80
 | |
| #define LCDC_VDCTRL2			0x90
 | |
| #define LCDC_VDCTRL3			0xa0
 | |
| #define LCDC_VDCTRL4			0xb0
 | |
| #define LCDC_DVICTRL0			0xc0
 | |
| #define LCDC_DVICTRL1			0xd0
 | |
| #define LCDC_DVICTRL2			0xe0
 | |
| #define LCDC_DVICTRL3			0xf0
 | |
| #define LCDC_DVICTRL4			0x100
 | |
| #define LCDC_V4_DATA			0x180
 | |
| #define LCDC_V3_DATA			0x1b0
 | |
| #define LCDC_V4_DEBUG0			0x1d0
 | |
| #define LCDC_V3_DEBUG0			0x1f0
 | |
| 
 | |
| #define CTRL_SFTRST			(1 << 31)
 | |
| #define CTRL_CLKGATE			(1 << 30)
 | |
| #define CTRL_BYPASS_COUNT		(1 << 19)
 | |
| #define CTRL_VSYNC_MODE			(1 << 18)
 | |
| #define CTRL_DOTCLK_MODE		(1 << 17)
 | |
| #define CTRL_DATA_SELECT		(1 << 16)
 | |
| #define CTRL_SET_BUS_WIDTH(x)		(((x) & 0x3) << 10)
 | |
| #define CTRL_GET_BUS_WIDTH(x)		(((x) >> 10) & 0x3)
 | |
| #define CTRL_SET_WORD_LENGTH(x)		(((x) & 0x3) << 8)
 | |
| #define CTRL_GET_WORD_LENGTH(x)		(((x) >> 8) & 0x3)
 | |
| #define CTRL_MASTER			(1 << 5)
 | |
| #define CTRL_DF16			(1 << 3)
 | |
| #define CTRL_DF18			(1 << 2)
 | |
| #define CTRL_DF24			(1 << 1)
 | |
| #define CTRL_RUN			(1 << 0)
 | |
| 
 | |
| #define CTRL1_FIFO_CLEAR		(1 << 21)
 | |
| #define CTRL1_SET_BYTE_PACKAGING(x)	(((x) & 0xf) << 16)
 | |
| #define CTRL1_GET_BYTE_PACKAGING(x)	(((x) >> 16) & 0xf)
 | |
| 
 | |
| #define TRANSFER_COUNT_SET_VCOUNT(x)	(((x) & 0xffff) << 16)
 | |
| #define TRANSFER_COUNT_GET_VCOUNT(x)	(((x) >> 16) & 0xffff)
 | |
| #define TRANSFER_COUNT_SET_HCOUNT(x)	((x) & 0xffff)
 | |
| #define TRANSFER_COUNT_GET_HCOUNT(x)	((x) & 0xffff)
 | |
| 
 | |
| 
 | |
| #define VDCTRL0_ENABLE_PRESENT		(1 << 28)
 | |
| #define VDCTRL0_VSYNC_ACT_HIGH		(1 << 27)
 | |
| #define VDCTRL0_HSYNC_ACT_HIGH		(1 << 26)
 | |
| #define VDCTRL0_DOTCLK_ACT_FALLING	(1 << 25)
 | |
| #define VDCTRL0_ENABLE_ACT_HIGH		(1 << 24)
 | |
| #define VDCTRL0_VSYNC_PERIOD_UNIT	(1 << 21)
 | |
| #define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	(1 << 20)
 | |
| #define VDCTRL0_HALF_LINE		(1 << 19)
 | |
| #define VDCTRL0_HALF_LINE_MODE		(1 << 18)
 | |
| #define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
 | |
| #define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
 | |
| 
 | |
| #define VDCTRL2_SET_HSYNC_PERIOD(x)	((x) & 0x3ffff)
 | |
| #define VDCTRL2_GET_HSYNC_PERIOD(x)	((x) & 0x3ffff)
 | |
| 
 | |
| #define VDCTRL3_MUX_SYNC_SIGNALS	(1 << 29)
 | |
| #define VDCTRL3_VSYNC_ONLY		(1 << 28)
 | |
| #define SET_HOR_WAIT_CNT(x)		(((x) & 0xfff) << 16)
 | |
| #define GET_HOR_WAIT_CNT(x)		(((x) >> 16) & 0xfff)
 | |
| #define SET_VERT_WAIT_CNT(x)		((x) & 0xffff)
 | |
| #define GET_VERT_WAIT_CNT(x)		((x) & 0xffff)
 | |
| 
 | |
| #define VDCTRL4_SET_DOTCLK_DLY(x)	(((x) & 0x7) << 29) /* v4 only */
 | |
| #define VDCTRL4_GET_DOTCLK_DLY(x)	(((x) >> 29) & 0x7) /* v4 only */
 | |
| #define VDCTRL4_SYNC_SIGNALS_ON		(1 << 18)
 | |
| #define SET_DOTCLK_H_VALID_DATA_CNT(x)	((x) & 0x3ffff)
 | |
| 
 | |
| #define DEBUG0_HSYNC			(1 < 26)
 | |
| #define DEBUG0_VSYNC			(1 < 25)
 | |
| 
 | |
| #define MIN_XRES			120
 | |
| #define MIN_YRES			120
 | |
| 
 | |
| #define RED 0
 | |
| #define GREEN 1
 | |
| #define BLUE 2
 | |
| #define TRANSP 3
 | |
| 
 | |
| #define STMLCDIF_8BIT  1 /** pixel data bus to the display is of 8 bit width */
 | |
| #define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
 | |
| #define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
 | |
| #define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
 | |
| 
 | |
| #define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT	(1 << 6)
 | |
| #define MXSFB_SYNC_DOTCLK_FALLING_ACT	(1 << 7) /* negative edge sampling */
 | |
| 
 | |
| enum mxsfb_devtype {
 | |
| 	MXSFB_V3,
 | |
| 	MXSFB_V4,
 | |
| };
 | |
| 
 | |
| /* CPU dependent register offsets */
 | |
| struct mxsfb_devdata {
 | |
| 	unsigned transfer_count;
 | |
| 	unsigned cur_buf;
 | |
| 	unsigned next_buf;
 | |
| 	unsigned debug0;
 | |
| 	unsigned hs_wdth_mask;
 | |
| 	unsigned hs_wdth_shift;
 | |
| 	unsigned ipversion;
 | |
| };
 | |
| 
 | |
| struct mxsfb_info {
 | |
| 	struct platform_device *pdev;
 | |
| 	struct clk *clk;
 | |
| 	struct clk *clk_axi;
 | |
| 	struct clk *clk_disp_axi;
 | |
| 	void __iomem *base;	/* registers */
 | |
| 	unsigned allocated_size;
 | |
| 	int enabled;
 | |
| 	unsigned ld_intf_width;
 | |
| 	unsigned dotclk_delay;
 | |
| 	const struct mxsfb_devdata *devdata;
 | |
| 	u32 sync;
 | |
| 	struct regulator *reg_lcd;
 | |
| };
 | |
| 
 | |
| #define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
 | |
| #define mxsfb_is_v4(host) (host->devdata->ipversion == 4)
 | |
| 
 | |
| static const struct mxsfb_devdata mxsfb_devdata[] = {
 | |
| 	[MXSFB_V3] = {
 | |
| 		.transfer_count = LCDC_V3_TRANSFER_COUNT,
 | |
| 		.cur_buf = LCDC_V3_CUR_BUF,
 | |
| 		.next_buf = LCDC_V3_NEXT_BUF,
 | |
| 		.debug0 = LCDC_V3_DEBUG0,
 | |
| 		.hs_wdth_mask = 0xff,
 | |
| 		.hs_wdth_shift = 24,
 | |
| 		.ipversion = 3,
 | |
| 	},
 | |
| 	[MXSFB_V4] = {
 | |
| 		.transfer_count = LCDC_V4_TRANSFER_COUNT,
 | |
| 		.cur_buf = LCDC_V4_CUR_BUF,
 | |
| 		.next_buf = LCDC_V4_NEXT_BUF,
 | |
| 		.debug0 = LCDC_V4_DEBUG0,
 | |
| 		.hs_wdth_mask = 0x3fff,
 | |
| 		.hs_wdth_shift = 18,
 | |
| 		.ipversion = 4,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| /* mask and shift depends on architecture */
 | |
| static inline u32 set_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
 | |
| {
 | |
| 	return (val & host->devdata->hs_wdth_mask) <<
 | |
| 		host->devdata->hs_wdth_shift;
 | |
| }
 | |
| 
 | |
| static inline u32 get_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
 | |
| {
 | |
| 	return (val >> host->devdata->hs_wdth_shift) &
 | |
| 		host->devdata->hs_wdth_mask;
 | |
| }
 | |
| 
 | |
| static const struct fb_bitfield def_rgb565[] = {
 | |
| 	[RED] = {
 | |
| 		.offset = 11,
 | |
| 		.length = 5,
 | |
| 	},
 | |
| 	[GREEN] = {
 | |
| 		.offset = 5,
 | |
| 		.length = 6,
 | |
| 	},
 | |
| 	[BLUE] = {
 | |
| 		.offset = 0,
 | |
| 		.length = 5,
 | |
| 	},
 | |
| 	[TRANSP] = {	/* no support for transparency */
 | |
| 		.length = 0,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static const struct fb_bitfield def_rgb888[] = {
 | |
| 	[RED] = {
 | |
| 		.offset = 16,
 | |
| 		.length = 8,
 | |
| 	},
 | |
| 	[GREEN] = {
 | |
| 		.offset = 8,
 | |
| 		.length = 8,
 | |
| 	},
 | |
| 	[BLUE] = {
 | |
| 		.offset = 0,
 | |
| 		.length = 8,
 | |
| 	},
 | |
| 	[TRANSP] = {	/* no support for transparency */
 | |
| 		.length = 0,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static inline unsigned chan_to_field(unsigned chan, struct fb_bitfield *bf)
 | |
| {
 | |
| 	chan &= 0xffff;
 | |
| 	chan >>= 16 - bf->length;
 | |
| 	return chan << bf->offset;
 | |
| }
 | |
| 
 | |
| static int mxsfb_check_var(struct fb_var_screeninfo *var,
 | |
| 		struct fb_info *fb_info)
 | |
| {
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 	const struct fb_bitfield *rgb = NULL;
 | |
| 
 | |
| 	if (var->xres < MIN_XRES)
 | |
| 		var->xres = MIN_XRES;
 | |
| 	if (var->yres < MIN_YRES)
 | |
| 		var->yres = MIN_YRES;
 | |
| 
 | |
| 	var->xres_virtual = var->xres;
 | |
| 
 | |
| 	var->yres_virtual = var->yres;
 | |
| 
 | |
| 	switch (var->bits_per_pixel) {
 | |
| 	case 16:
 | |
| 		/* always expect RGB 565 */
 | |
| 		rgb = def_rgb565;
 | |
| 		break;
 | |
| 	case 32:
 | |
| 		switch (host->ld_intf_width) {
 | |
| 		case STMLCDIF_8BIT:
 | |
| 			pr_debug("Unsupported LCD bus width mapping\n");
 | |
| 			break;
 | |
| 		case STMLCDIF_16BIT:
 | |
| 		case STMLCDIF_18BIT:
 | |
| 		case STMLCDIF_24BIT:
 | |
| 			/* real 24 bit */
 | |
| 			rgb = def_rgb888;
 | |
| 			break;
 | |
| 		}
 | |
| 		break;
 | |
| 	default:
 | |
| 		pr_err("Unsupported colour depth: %u\n", var->bits_per_pixel);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Copy the RGB parameters for this display
 | |
| 	 * from the machine specific parameters.
 | |
| 	 */
 | |
| 	var->red    = rgb[RED];
 | |
| 	var->green  = rgb[GREEN];
 | |
| 	var->blue   = rgb[BLUE];
 | |
| 	var->transp = rgb[TRANSP];
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static inline void mxsfb_enable_axi_clk(struct mxsfb_info *host)
 | |
| {
 | |
| 	if (host->clk_axi)
 | |
| 		clk_prepare_enable(host->clk_axi);
 | |
| }
 | |
| 
 | |
| static inline void mxsfb_disable_axi_clk(struct mxsfb_info *host)
 | |
| {
 | |
| 	if (host->clk_axi)
 | |
| 		clk_disable_unprepare(host->clk_axi);
 | |
| }
 | |
| 
 | |
| static void mxsfb_enable_controller(struct fb_info *fb_info)
 | |
| {
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 	u32 reg;
 | |
| 	int ret;
 | |
| 
 | |
| 	dev_dbg(&host->pdev->dev, "%s\n", __func__);
 | |
| 
 | |
| 	if (host->reg_lcd) {
 | |
| 		ret = regulator_enable(host->reg_lcd);
 | |
| 		if (ret) {
 | |
| 			dev_err(&host->pdev->dev,
 | |
| 				"lcd regulator enable failed:	%d\n", ret);
 | |
| 			return;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (host->clk_disp_axi)
 | |
| 		clk_prepare_enable(host->clk_disp_axi);
 | |
| 	clk_prepare_enable(host->clk);
 | |
| 	clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
 | |
| 
 | |
| 	mxsfb_enable_axi_clk(host);
 | |
| 
 | |
| 	/* if it was disabled, re-enable the mode again */
 | |
| 	writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_SET);
 | |
| 
 | |
| 	/* enable the SYNC signals first, then the DMA engine */
 | |
| 	reg = readl(host->base + LCDC_VDCTRL4);
 | |
| 	reg |= VDCTRL4_SYNC_SIGNALS_ON;
 | |
| 	writel(reg, host->base + LCDC_VDCTRL4);
 | |
| 
 | |
| 	writel(CTRL_RUN, host->base + LCDC_CTRL + REG_SET);
 | |
| 
 | |
| 	host->enabled = 1;
 | |
| }
 | |
| 
 | |
| static void mxsfb_disable_controller(struct fb_info *fb_info)
 | |
| {
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 	unsigned loop;
 | |
| 	u32 reg;
 | |
| 	int ret;
 | |
| 
 | |
| 	dev_dbg(&host->pdev->dev, "%s\n", __func__);
 | |
| 
 | |
| 	/*
 | |
| 	 * Even if we disable the controller here, it will still continue
 | |
| 	 * until its FIFOs are running out of data
 | |
| 	 */
 | |
| 	writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_CLR);
 | |
| 
 | |
| 	loop = 1000;
 | |
| 	while (loop) {
 | |
| 		reg = readl(host->base + LCDC_CTRL);
 | |
| 		if (!(reg & CTRL_RUN))
 | |
| 			break;
 | |
| 		loop--;
 | |
| 	}
 | |
| 
 | |
| 	reg = readl(host->base + LCDC_VDCTRL4);
 | |
| 	writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
 | |
| 
 | |
| 	mxsfb_disable_axi_clk(host);
 | |
| 
 | |
| 	clk_disable_unprepare(host->clk);
 | |
| 	if (host->clk_disp_axi)
 | |
| 		clk_disable_unprepare(host->clk_disp_axi);
 | |
| 
 | |
| 	host->enabled = 0;
 | |
| 
 | |
| 	if (host->reg_lcd) {
 | |
| 		ret = regulator_disable(host->reg_lcd);
 | |
| 		if (ret)
 | |
| 			dev_err(&host->pdev->dev,
 | |
| 				"lcd regulator disable failed: %d\n", ret);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int mxsfb_set_par(struct fb_info *fb_info)
 | |
| {
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 	u32 ctrl, vdctrl0, vdctrl4;
 | |
| 	int line_size, fb_size;
 | |
| 	int reenable = 0;
 | |
| 
 | |
| 	line_size =  fb_info->var.xres * (fb_info->var.bits_per_pixel >> 3);
 | |
| 	fb_size = fb_info->var.yres_virtual * line_size;
 | |
| 
 | |
| 	if (fb_size > fb_info->fix.smem_len)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	fb_info->fix.line_length = line_size;
 | |
| 
 | |
| 	/*
 | |
| 	 * It seems, you can't re-program the controller if it is still running.
 | |
| 	 * This may lead into shifted pictures (FIFO issue?).
 | |
| 	 * So, first stop the controller and drain its FIFOs
 | |
| 	 */
 | |
| 	if (host->enabled) {
 | |
| 		reenable = 1;
 | |
| 		mxsfb_disable_controller(fb_info);
 | |
| 	}
 | |
| 
 | |
| 	mxsfb_enable_axi_clk(host);
 | |
| 
 | |
| 	/* clear the FIFOs */
 | |
| 	writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET);
 | |
| 
 | |
| 	ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER |
 | |
| 		CTRL_SET_BUS_WIDTH(host->ld_intf_width);
 | |
| 
 | |
| 	switch (fb_info->var.bits_per_pixel) {
 | |
| 	case 16:
 | |
| 		dev_dbg(&host->pdev->dev, "Setting up RGB565 mode\n");
 | |
| 		ctrl |= CTRL_SET_WORD_LENGTH(0);
 | |
| 		writel(CTRL1_SET_BYTE_PACKAGING(0xf), host->base + LCDC_CTRL1);
 | |
| 		break;
 | |
| 	case 32:
 | |
| 		dev_dbg(&host->pdev->dev, "Setting up RGB888/666 mode\n");
 | |
| 		ctrl |= CTRL_SET_WORD_LENGTH(3);
 | |
| 		switch (host->ld_intf_width) {
 | |
| 		case STMLCDIF_8BIT:
 | |
| 			mxsfb_disable_axi_clk(host);
 | |
| 			dev_err(&host->pdev->dev,
 | |
| 					"Unsupported LCD bus width mapping\n");
 | |
| 			return -EINVAL;
 | |
| 		case STMLCDIF_16BIT:
 | |
| 		case STMLCDIF_18BIT:
 | |
| 		case STMLCDIF_24BIT:
 | |
| 			/* real 24 bit */
 | |
| 			break;
 | |
| 		}
 | |
| 		/* do not use packed pixels = one pixel per word instead */
 | |
| 		writel(CTRL1_SET_BYTE_PACKAGING(0x7), host->base + LCDC_CTRL1);
 | |
| 		break;
 | |
| 	default:
 | |
| 		mxsfb_disable_axi_clk(host);
 | |
| 		dev_err(&host->pdev->dev, "Unhandled color depth of %u\n",
 | |
| 				fb_info->var.bits_per_pixel);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	writel(ctrl, host->base + LCDC_CTRL);
 | |
| 
 | |
| 	writel(TRANSFER_COUNT_SET_VCOUNT(fb_info->var.yres) |
 | |
| 			TRANSFER_COUNT_SET_HCOUNT(fb_info->var.xres),
 | |
| 			host->base + host->devdata->transfer_count);
 | |
| 
 | |
| 	vdctrl0 = VDCTRL0_ENABLE_PRESENT |	/* always in DOTCLOCK mode */
 | |
| 		VDCTRL0_VSYNC_PERIOD_UNIT |
 | |
| 		VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
 | |
| 		VDCTRL0_SET_VSYNC_PULSE_WIDTH(fb_info->var.vsync_len);
 | |
| 	if (fb_info->var.sync & FB_SYNC_HOR_HIGH_ACT)
 | |
| 		vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
 | |
| 	if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT)
 | |
| 		vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
 | |
| 	if (host->sync & MXSFB_SYNC_DATA_ENABLE_HIGH_ACT)
 | |
| 		vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
 | |
| 	if (host->sync & MXSFB_SYNC_DOTCLK_FALLING_ACT)
 | |
| 		vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
 | |
| 
 | |
| 	writel(vdctrl0, host->base + LCDC_VDCTRL0);
 | |
| 
 | |
| 	/* frame length in lines */
 | |
| 	writel(fb_info->var.upper_margin + fb_info->var.vsync_len +
 | |
| 		fb_info->var.lower_margin + fb_info->var.yres,
 | |
| 		host->base + LCDC_VDCTRL1);
 | |
| 
 | |
| 	/* line length in units of clocks or pixels */
 | |
| 	writel(set_hsync_pulse_width(host, fb_info->var.hsync_len) |
 | |
| 		VDCTRL2_SET_HSYNC_PERIOD(fb_info->var.left_margin +
 | |
| 		fb_info->var.hsync_len + fb_info->var.right_margin +
 | |
| 		fb_info->var.xres),
 | |
| 		host->base + LCDC_VDCTRL2);
 | |
| 
 | |
| 	writel(SET_HOR_WAIT_CNT(fb_info->var.left_margin +
 | |
| 		fb_info->var.hsync_len) |
 | |
| 		SET_VERT_WAIT_CNT(fb_info->var.upper_margin +
 | |
| 			fb_info->var.vsync_len),
 | |
| 		host->base + LCDC_VDCTRL3);
 | |
| 
 | |
| 	vdctrl4 = SET_DOTCLK_H_VALID_DATA_CNT(fb_info->var.xres);
 | |
| 	if (mxsfb_is_v4(host))
 | |
| 		vdctrl4 |= VDCTRL4_SET_DOTCLK_DLY(host->dotclk_delay);
 | |
| 	writel(vdctrl4, host->base + LCDC_VDCTRL4);
 | |
| 
 | |
| 	writel(fb_info->fix.smem_start +
 | |
| 			fb_info->fix.line_length * fb_info->var.yoffset,
 | |
| 			host->base + host->devdata->next_buf);
 | |
| 
 | |
| 	mxsfb_disable_axi_clk(host);
 | |
| 
 | |
| 	if (reenable)
 | |
| 		mxsfb_enable_controller(fb_info);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int mxsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 | |
| 		u_int transp, struct fb_info *fb_info)
 | |
| {
 | |
| 	unsigned int val;
 | |
| 	int ret = -EINVAL;
 | |
| 
 | |
| 	/*
 | |
| 	 * If greyscale is true, then we convert the RGB value
 | |
| 	 * to greyscale no matter what visual we are using.
 | |
| 	 */
 | |
| 	if (fb_info->var.grayscale)
 | |
| 		red = green = blue = (19595 * red + 38470 * green +
 | |
| 					7471 * blue) >> 16;
 | |
| 
 | |
| 	switch (fb_info->fix.visual) {
 | |
| 	case FB_VISUAL_TRUECOLOR:
 | |
| 		/*
 | |
| 		 * 12 or 16-bit True Colour.  We encode the RGB value
 | |
| 		 * according to the RGB bitfield information.
 | |
| 		 */
 | |
| 		if (regno < 16) {
 | |
| 			u32 *pal = fb_info->pseudo_palette;
 | |
| 
 | |
| 			val  = chan_to_field(red, &fb_info->var.red);
 | |
| 			val |= chan_to_field(green, &fb_info->var.green);
 | |
| 			val |= chan_to_field(blue, &fb_info->var.blue);
 | |
| 
 | |
| 			pal[regno] = val;
 | |
| 			ret = 0;
 | |
| 		}
 | |
| 		break;
 | |
| 
 | |
| 	case FB_VISUAL_STATIC_PSEUDOCOLOR:
 | |
| 	case FB_VISUAL_PSEUDOCOLOR:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int mxsfb_blank(int blank, struct fb_info *fb_info)
 | |
| {
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 
 | |
| 	switch (blank) {
 | |
| 	case FB_BLANK_POWERDOWN:
 | |
| 	case FB_BLANK_VSYNC_SUSPEND:
 | |
| 	case FB_BLANK_HSYNC_SUSPEND:
 | |
| 	case FB_BLANK_NORMAL:
 | |
| 		if (host->enabled)
 | |
| 			mxsfb_disable_controller(fb_info);
 | |
| 		break;
 | |
| 
 | |
| 	case FB_BLANK_UNBLANK:
 | |
| 		if (!host->enabled)
 | |
| 			mxsfb_enable_controller(fb_info);
 | |
| 		break;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int mxsfb_pan_display(struct fb_var_screeninfo *var,
 | |
| 		struct fb_info *fb_info)
 | |
| {
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 	unsigned offset;
 | |
| 
 | |
| 	if (var->xoffset != 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	offset = fb_info->fix.line_length * var->yoffset;
 | |
| 
 | |
| 	mxsfb_enable_axi_clk(host);
 | |
| 
 | |
| 	/* update on next VSYNC */
 | |
| 	writel(fb_info->fix.smem_start + offset,
 | |
| 			host->base + host->devdata->next_buf);
 | |
| 
 | |
| 	mxsfb_disable_axi_clk(host);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct fb_ops mxsfb_ops = {
 | |
| 	.owner = THIS_MODULE,
 | |
| 	.fb_check_var = mxsfb_check_var,
 | |
| 	.fb_set_par = mxsfb_set_par,
 | |
| 	.fb_setcolreg = mxsfb_setcolreg,
 | |
| 	.fb_blank = mxsfb_blank,
 | |
| 	.fb_pan_display = mxsfb_pan_display,
 | |
| 	.fb_fillrect = cfb_fillrect,
 | |
| 	.fb_copyarea = cfb_copyarea,
 | |
| 	.fb_imageblit = cfb_imageblit,
 | |
| };
 | |
| 
 | |
| static int mxsfb_restore_mode(struct fb_info *fb_info,
 | |
| 			struct fb_videomode *vmode)
 | |
| {
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 	unsigned line_count;
 | |
| 	unsigned period;
 | |
| 	unsigned long pa, fbsize;
 | |
| 	int bits_per_pixel, ofs, ret = 0;
 | |
| 	u32 transfer_count, vdctrl0, vdctrl2, vdctrl3, vdctrl4, ctrl;
 | |
| 
 | |
| 	mxsfb_enable_axi_clk(host);
 | |
| 
 | |
| 	/* Only restore the mode when the controller is running */
 | |
| 	ctrl = readl(host->base + LCDC_CTRL);
 | |
| 	if (!(ctrl & CTRL_RUN)) {
 | |
| 		ret = -EINVAL;
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	vdctrl0 = readl(host->base + LCDC_VDCTRL0);
 | |
| 	vdctrl2 = readl(host->base + LCDC_VDCTRL2);
 | |
| 	vdctrl3 = readl(host->base + LCDC_VDCTRL3);
 | |
| 	vdctrl4 = readl(host->base + LCDC_VDCTRL4);
 | |
| 
 | |
| 	transfer_count = readl(host->base + host->devdata->transfer_count);
 | |
| 
 | |
| 	vmode->xres = TRANSFER_COUNT_GET_HCOUNT(transfer_count);
 | |
| 	vmode->yres = TRANSFER_COUNT_GET_VCOUNT(transfer_count);
 | |
| 
 | |
| 	switch (CTRL_GET_WORD_LENGTH(ctrl)) {
 | |
| 	case 0:
 | |
| 		bits_per_pixel = 16;
 | |
| 		break;
 | |
| 	case 3:
 | |
| 		bits_per_pixel = 32;
 | |
| 		break;
 | |
| 	case 1:
 | |
| 	default:
 | |
| 		ret = -EINVAL;
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	fb_info->var.bits_per_pixel = bits_per_pixel;
 | |
| 
 | |
| 	vmode->pixclock = KHZ2PICOS(clk_get_rate(host->clk) / 1000U);
 | |
| 	vmode->hsync_len = get_hsync_pulse_width(host, vdctrl2);
 | |
| 	vmode->left_margin = GET_HOR_WAIT_CNT(vdctrl3) - vmode->hsync_len;
 | |
| 	vmode->right_margin = VDCTRL2_GET_HSYNC_PERIOD(vdctrl2) -
 | |
| 		vmode->hsync_len - vmode->left_margin - vmode->xres;
 | |
| 	vmode->vsync_len = VDCTRL0_GET_VSYNC_PULSE_WIDTH(vdctrl0);
 | |
| 	period = readl(host->base + LCDC_VDCTRL1);
 | |
| 	vmode->upper_margin = GET_VERT_WAIT_CNT(vdctrl3) - vmode->vsync_len;
 | |
| 	vmode->lower_margin = period - vmode->vsync_len -
 | |
| 		vmode->upper_margin - vmode->yres;
 | |
| 
 | |
| 	vmode->vmode = FB_VMODE_NONINTERLACED;
 | |
| 
 | |
| 	vmode->sync = 0;
 | |
| 	if (vdctrl0 & VDCTRL0_HSYNC_ACT_HIGH)
 | |
| 		vmode->sync |= FB_SYNC_HOR_HIGH_ACT;
 | |
| 	if (vdctrl0 & VDCTRL0_VSYNC_ACT_HIGH)
 | |
| 		vmode->sync |= FB_SYNC_VERT_HIGH_ACT;
 | |
| 
 | |
| 	pr_debug("Reconstructed video mode:\n");
 | |
| 	pr_debug("%dx%d, hsync: %u left: %u, right: %u, vsync: %u, upper: %u, lower: %u\n",
 | |
| 		vmode->xres, vmode->yres, vmode->hsync_len, vmode->left_margin,
 | |
| 		vmode->right_margin, vmode->vsync_len, vmode->upper_margin,
 | |
| 		vmode->lower_margin);
 | |
| 	pr_debug("pixclk: %ldkHz\n", PICOS2KHZ(vmode->pixclock));
 | |
| 
 | |
| 	host->ld_intf_width = CTRL_GET_BUS_WIDTH(ctrl);
 | |
| 	host->dotclk_delay = VDCTRL4_GET_DOTCLK_DLY(vdctrl4);
 | |
| 
 | |
| 	fb_info->fix.line_length = vmode->xres * (bits_per_pixel >> 3);
 | |
| 
 | |
| 	pa = readl(host->base + host->devdata->cur_buf);
 | |
| 	fbsize = fb_info->fix.line_length * vmode->yres;
 | |
| 	if (pa < fb_info->fix.smem_start) {
 | |
| 		ret = -EINVAL;
 | |
| 		goto err;
 | |
| 	}
 | |
| 	if (pa + fbsize > fb_info->fix.smem_start + fb_info->fix.smem_len) {
 | |
| 		ret = -EINVAL;
 | |
| 		goto err;
 | |
| 	}
 | |
| 	ofs = pa - fb_info->fix.smem_start;
 | |
| 	if (ofs) {
 | |
| 		memmove(fb_info->screen_base, fb_info->screen_base + ofs, fbsize);
 | |
| 		writel(fb_info->fix.smem_start, host->base + host->devdata->next_buf);
 | |
| 	}
 | |
| 
 | |
| 	line_count = fb_info->fix.smem_len / fb_info->fix.line_length;
 | |
| 	fb_info->fix.ypanstep = 1;
 | |
| 
 | |
| 	clk_prepare_enable(host->clk);
 | |
| 	host->enabled = 1;
 | |
| 
 | |
| err:
 | |
| 	if (ret)
 | |
| 		mxsfb_disable_axi_clk(host);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int mxsfb_init_fbinfo_dt(struct fb_info *fb_info,
 | |
| 				struct fb_videomode *vmode)
 | |
| {
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 	struct fb_var_screeninfo *var = &fb_info->var;
 | |
| 	struct device *dev = &host->pdev->dev;
 | |
| 	struct device_node *np = host->pdev->dev.of_node;
 | |
| 	struct device_node *display_np;
 | |
| 	struct videomode vm;
 | |
| 	u32 width;
 | |
| 	int ret;
 | |
| 
 | |
| 	display_np = of_parse_phandle(np, "display", 0);
 | |
| 	if (!display_np) {
 | |
| 		dev_err(dev, "failed to find display phandle\n");
 | |
| 		return -ENOENT;
 | |
| 	}
 | |
| 
 | |
| 	ret = of_property_read_u32(display_np, "bus-width", &width);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "failed to get property bus-width\n");
 | |
| 		goto put_display_node;
 | |
| 	}
 | |
| 
 | |
| 	switch (width) {
 | |
| 	case 8:
 | |
| 		host->ld_intf_width = STMLCDIF_8BIT;
 | |
| 		break;
 | |
| 	case 16:
 | |
| 		host->ld_intf_width = STMLCDIF_16BIT;
 | |
| 		break;
 | |
| 	case 18:
 | |
| 		host->ld_intf_width = STMLCDIF_18BIT;
 | |
| 		break;
 | |
| 	case 24:
 | |
| 		host->ld_intf_width = STMLCDIF_24BIT;
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_err(dev, "invalid bus-width value\n");
 | |
| 		ret = -EINVAL;
 | |
| 		goto put_display_node;
 | |
| 	}
 | |
| 
 | |
| 	ret = of_property_read_u32(display_np, "bits-per-pixel",
 | |
| 				   &var->bits_per_pixel);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "failed to get property bits-per-pixel\n");
 | |
| 		goto put_display_node;
 | |
| 	}
 | |
| 
 | |
| 	ret = of_get_videomode(display_np, &vm, OF_USE_NATIVE_MODE);
 | |
| 	if (ret) {
 | |
| 		dev_err(dev, "failed to get videomode from DT\n");
 | |
| 		goto put_display_node;
 | |
| 	}
 | |
| 
 | |
| 	ret = fb_videomode_from_videomode(&vm, vmode);
 | |
| 	if (ret < 0)
 | |
| 		goto put_display_node;
 | |
| 
 | |
| 	if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
 | |
| 		host->sync |= MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
 | |
| 
 | |
| 	/*
 | |
| 	 * The PIXDATA flags of the display_flags enum are controller
 | |
| 	 * centric, e.g. NEGEDGE means drive data on negative edge.
 | |
| 	 * However, the drivers flag is display centric: Sample the
 | |
| 	 * data on negative (falling) edge. Therefore, check for the
 | |
| 	 * POSEDGE flag:
 | |
| 	 * drive on positive edge => sample on negative edge
 | |
| 	 */
 | |
| 	if (vm.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
 | |
| 		host->sync |= MXSFB_SYNC_DOTCLK_FALLING_ACT;
 | |
| 
 | |
| put_display_node:
 | |
| 	of_node_put(display_np);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int mxsfb_init_fbinfo(struct fb_info *fb_info,
 | |
| 			struct fb_videomode *vmode)
 | |
| {
 | |
| 	int ret;
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 	struct device *dev = &host->pdev->dev;
 | |
| 	struct fb_var_screeninfo *var = &fb_info->var;
 | |
| 	dma_addr_t fb_phys;
 | |
| 	void *fb_virt;
 | |
| 	unsigned fb_size;
 | |
| 
 | |
| 	fb_info->fbops = &mxsfb_ops;
 | |
| 	fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST;
 | |
| 	strlcpy(fb_info->fix.id, "mxs", sizeof(fb_info->fix.id));
 | |
| 	fb_info->fix.type = FB_TYPE_PACKED_PIXELS;
 | |
| 	fb_info->fix.ypanstep = 1;
 | |
| 	fb_info->fix.visual = FB_VISUAL_TRUECOLOR,
 | |
| 	fb_info->fix.accel = FB_ACCEL_NONE;
 | |
| 
 | |
| 	ret = mxsfb_init_fbinfo_dt(fb_info, vmode);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	var->nonstd = 0;
 | |
| 	var->activate = FB_ACTIVATE_NOW;
 | |
| 	var->accel_flags = 0;
 | |
| 	var->vmode = FB_VMODE_NONINTERLACED;
 | |
| 
 | |
| 	/* Memory allocation for framebuffer */
 | |
| 	fb_size = SZ_2M;
 | |
| 	fb_virt = dma_alloc_wc(dev, PAGE_ALIGN(fb_size), &fb_phys, GFP_KERNEL);
 | |
| 	if (!fb_virt)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	fb_info->fix.smem_start = fb_phys;
 | |
| 	fb_info->screen_base = fb_virt;
 | |
| 	fb_info->screen_size = fb_info->fix.smem_len = fb_size;
 | |
| 
 | |
| 	if (mxsfb_restore_mode(fb_info, vmode))
 | |
| 		memset(fb_virt, 0, fb_size);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void mxsfb_free_videomem(struct fb_info *fb_info)
 | |
| {
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 	struct device *dev = &host->pdev->dev;
 | |
| 
 | |
| 	dma_free_wc(dev, fb_info->screen_size, fb_info->screen_base,
 | |
| 		    fb_info->fix.smem_start);
 | |
| }
 | |
| 
 | |
| static const struct platform_device_id mxsfb_devtype[] = {
 | |
| 	{
 | |
| 		.name = "imx23-fb",
 | |
| 		.driver_data = MXSFB_V3,
 | |
| 	}, {
 | |
| 		.name = "imx28-fb",
 | |
| 		.driver_data = MXSFB_V4,
 | |
| 	}, {
 | |
| 		/* sentinel */
 | |
| 	}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
 | |
| 
 | |
| static const struct of_device_id mxsfb_dt_ids[] = {
 | |
| 	{ .compatible = "fsl,imx23-lcdif", .data = &mxsfb_devtype[0], },
 | |
| 	{ .compatible = "fsl,imx28-lcdif", .data = &mxsfb_devtype[1], },
 | |
| 	{ /* sentinel */ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, mxsfb_dt_ids);
 | |
| 
 | |
| static int mxsfb_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	const struct of_device_id *of_id =
 | |
| 			of_match_device(mxsfb_dt_ids, &pdev->dev);
 | |
| 	struct resource *res;
 | |
| 	struct mxsfb_info *host;
 | |
| 	struct fb_info *fb_info;
 | |
| 	struct fb_videomode *mode;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (of_id)
 | |
| 		pdev->id_entry = of_id->data;
 | |
| 
 | |
| 	fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev);
 | |
| 	if (!fb_info) {
 | |
| 		dev_err(&pdev->dev, "Failed to allocate fbdev\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	mode = devm_kzalloc(&pdev->dev, sizeof(struct fb_videomode),
 | |
| 			GFP_KERNEL);
 | |
| 	if (mode == NULL)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	host = fb_info->par;
 | |
| 
 | |
| 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | |
| 	host->base = devm_ioremap_resource(&pdev->dev, res);
 | |
| 	if (IS_ERR(host->base)) {
 | |
| 		ret = PTR_ERR(host->base);
 | |
| 		goto fb_release;
 | |
| 	}
 | |
| 
 | |
| 	host->pdev = pdev;
 | |
| 	platform_set_drvdata(pdev, host);
 | |
| 
 | |
| 	host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
 | |
| 
 | |
| 	host->clk = devm_clk_get(&host->pdev->dev, NULL);
 | |
| 	if (IS_ERR(host->clk)) {
 | |
| 		ret = PTR_ERR(host->clk);
 | |
| 		goto fb_release;
 | |
| 	}
 | |
| 
 | |
| 	host->clk_axi = devm_clk_get(&host->pdev->dev, "axi");
 | |
| 	if (IS_ERR(host->clk_axi))
 | |
| 		host->clk_axi = NULL;
 | |
| 
 | |
| 	host->clk_disp_axi = devm_clk_get(&host->pdev->dev, "disp_axi");
 | |
| 	if (IS_ERR(host->clk_disp_axi))
 | |
| 		host->clk_disp_axi = NULL;
 | |
| 
 | |
| 	host->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
 | |
| 	if (IS_ERR(host->reg_lcd))
 | |
| 		host->reg_lcd = NULL;
 | |
| 
 | |
| 	fb_info->pseudo_palette = devm_kcalloc(&pdev->dev, 16, sizeof(u32),
 | |
| 					       GFP_KERNEL);
 | |
| 	if (!fb_info->pseudo_palette) {
 | |
| 		ret = -ENOMEM;
 | |
| 		goto fb_release;
 | |
| 	}
 | |
| 
 | |
| 	ret = mxsfb_init_fbinfo(fb_info, mode);
 | |
| 	if (ret != 0)
 | |
| 		goto fb_release;
 | |
| 
 | |
| 	fb_videomode_to_var(&fb_info->var, mode);
 | |
| 
 | |
| 	/* init the color fields */
 | |
| 	mxsfb_check_var(&fb_info->var, fb_info);
 | |
| 
 | |
| 	platform_set_drvdata(pdev, fb_info);
 | |
| 
 | |
| 	ret = register_framebuffer(fb_info);
 | |
| 	if (ret != 0) {
 | |
| 		dev_err(&pdev->dev,"Failed to register framebuffer\n");
 | |
| 		goto fb_destroy;
 | |
| 	}
 | |
| 
 | |
| 	if (!host->enabled) {
 | |
| 		mxsfb_enable_axi_clk(host);
 | |
| 		writel(0, host->base + LCDC_CTRL);
 | |
| 		mxsfb_disable_axi_clk(host);
 | |
| 		mxsfb_set_par(fb_info);
 | |
| 		mxsfb_enable_controller(fb_info);
 | |
| 	}
 | |
| 
 | |
| 	dev_info(&pdev->dev, "initialized\n");
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fb_destroy:
 | |
| 	if (host->enabled)
 | |
| 		clk_disable_unprepare(host->clk);
 | |
| fb_release:
 | |
| 	framebuffer_release(fb_info);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int mxsfb_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct fb_info *fb_info = platform_get_drvdata(pdev);
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 
 | |
| 	if (host->enabled)
 | |
| 		mxsfb_disable_controller(fb_info);
 | |
| 
 | |
| 	unregister_framebuffer(fb_info);
 | |
| 	mxsfb_free_videomem(fb_info);
 | |
| 
 | |
| 	framebuffer_release(fb_info);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void mxsfb_shutdown(struct platform_device *pdev)
 | |
| {
 | |
| 	struct fb_info *fb_info = platform_get_drvdata(pdev);
 | |
| 	struct mxsfb_info *host = fb_info->par;
 | |
| 
 | |
| 	mxsfb_enable_axi_clk(host);
 | |
| 
 | |
| 	/*
 | |
| 	 * Force stop the LCD controller as keeping it running during reboot
 | |
| 	 * might interfere with the BootROM's boot mode pads sampling.
 | |
| 	 */
 | |
| 	writel(CTRL_RUN, host->base + LCDC_CTRL + REG_CLR);
 | |
| 
 | |
| 	mxsfb_disable_axi_clk(host);
 | |
| }
 | |
| 
 | |
| static struct platform_driver mxsfb_driver = {
 | |
| 	.probe = mxsfb_probe,
 | |
| 	.remove = mxsfb_remove,
 | |
| 	.shutdown = mxsfb_shutdown,
 | |
| 	.id_table = mxsfb_devtype,
 | |
| 	.driver = {
 | |
| 		   .name = DRIVER_NAME,
 | |
| 		   .of_match_table = mxsfb_dt_ids,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| module_platform_driver(mxsfb_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("Freescale mxs framebuffer driver");
 | |
| MODULE_AUTHOR("Sascha Hauer, Pengutronix");
 | |
| MODULE_LICENSE("GPL");
 | 
