456 lines
		
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			456 lines
		
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * GPIO based serio bus driver for bit banging the PS/2 protocol
 | |
|  *
 | |
|  * Author: Danilo Krummrich <danilokrummrich@dk-develop.de>
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  */
 | |
| 
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/serio.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/workqueue.h>
 | |
| #include <linux/completion.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/preempt.h>
 | |
| #include <linux/property.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/jiffies.h>
 | |
| #include <linux/delay.h>
 | |
| 
 | |
| #define DRIVER_NAME		"ps2-gpio"
 | |
| 
 | |
| #define PS2_MODE_RX		0
 | |
| #define PS2_MODE_TX		1
 | |
| 
 | |
| #define PS2_START_BIT		0
 | |
| #define PS2_DATA_BIT0		1
 | |
| #define PS2_DATA_BIT1		2
 | |
| #define PS2_DATA_BIT2		3
 | |
| #define PS2_DATA_BIT3		4
 | |
| #define PS2_DATA_BIT4		5
 | |
| #define PS2_DATA_BIT5		6
 | |
| #define PS2_DATA_BIT6		7
 | |
| #define PS2_DATA_BIT7		8
 | |
| #define PS2_PARITY_BIT		9
 | |
| #define PS2_STOP_BIT		10
 | |
| #define PS2_TX_TIMEOUT		11
 | |
| #define PS2_ACK_BIT		12
 | |
| 
 | |
| #define PS2_DEV_RET_ACK		0xfa
 | |
| #define PS2_DEV_RET_NACK	0xfe
 | |
| 
 | |
| #define PS2_CMD_RESEND		0xfe
 | |
| 
 | |
| struct ps2_gpio_data {
 | |
| 	struct device *dev;
 | |
| 	struct serio *serio;
 | |
| 	unsigned char mode;
 | |
| 	struct gpio_desc *gpio_clk;
 | |
| 	struct gpio_desc *gpio_data;
 | |
| 	bool write_enable;
 | |
| 	int irq;
 | |
| 	unsigned char rx_cnt;
 | |
| 	unsigned char rx_byte;
 | |
| 	unsigned char tx_cnt;
 | |
| 	unsigned char tx_byte;
 | |
| 	struct completion tx_done;
 | |
| 	struct mutex tx_mutex;
 | |
| 	struct delayed_work tx_work;
 | |
| };
 | |
| 
 | |
| static int ps2_gpio_open(struct serio *serio)
 | |
| {
 | |
| 	struct ps2_gpio_data *drvdata = serio->port_data;
 | |
| 
 | |
| 	enable_irq(drvdata->irq);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void ps2_gpio_close(struct serio *serio)
 | |
| {
 | |
| 	struct ps2_gpio_data *drvdata = serio->port_data;
 | |
| 
 | |
| 	flush_delayed_work(&drvdata->tx_work);
 | |
| 	disable_irq(drvdata->irq);
 | |
| }
 | |
| 
 | |
| static int __ps2_gpio_write(struct serio *serio, unsigned char val)
 | |
| {
 | |
| 	struct ps2_gpio_data *drvdata = serio->port_data;
 | |
| 
 | |
| 	disable_irq_nosync(drvdata->irq);
 | |
| 	gpiod_direction_output(drvdata->gpio_clk, 0);
 | |
| 
 | |
| 	drvdata->mode = PS2_MODE_TX;
 | |
| 	drvdata->tx_byte = val;
 | |
| 
 | |
| 	schedule_delayed_work(&drvdata->tx_work, usecs_to_jiffies(200));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ps2_gpio_write(struct serio *serio, unsigned char val)
 | |
| {
 | |
| 	struct ps2_gpio_data *drvdata = serio->port_data;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	if (in_task()) {
 | |
| 		mutex_lock(&drvdata->tx_mutex);
 | |
| 		__ps2_gpio_write(serio, val);
 | |
| 		if (!wait_for_completion_timeout(&drvdata->tx_done,
 | |
| 						 msecs_to_jiffies(10000)))
 | |
| 			ret = SERIO_TIMEOUT;
 | |
| 		mutex_unlock(&drvdata->tx_mutex);
 | |
| 	} else {
 | |
| 		__ps2_gpio_write(serio, val);
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void ps2_gpio_tx_work_fn(struct work_struct *work)
 | |
| {
 | |
| 	struct delayed_work *dwork = to_delayed_work(work);
 | |
| 	struct ps2_gpio_data *drvdata = container_of(dwork,
 | |
| 						    struct ps2_gpio_data,
 | |
| 						    tx_work);
 | |
| 
 | |
| 	enable_irq(drvdata->irq);
 | |
| 	gpiod_direction_output(drvdata->gpio_data, 0);
 | |
| 	gpiod_direction_input(drvdata->gpio_clk);
 | |
| }
 | |
| 
 | |
| static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata)
 | |
| {
 | |
| 	unsigned char byte, cnt;
 | |
| 	int data;
 | |
| 	int rxflags = 0;
 | |
| 	static unsigned long old_jiffies;
 | |
| 
 | |
| 	byte = drvdata->rx_byte;
 | |
| 	cnt = drvdata->rx_cnt;
 | |
| 
 | |
| 	if (old_jiffies == 0)
 | |
| 		old_jiffies = jiffies;
 | |
| 
 | |
| 	if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) {
 | |
| 		dev_err(drvdata->dev,
 | |
| 			"RX: timeout, probably we missed an interrupt\n");
 | |
| 		goto err;
 | |
| 	}
 | |
| 	old_jiffies = jiffies;
 | |
| 
 | |
| 	data = gpiod_get_value(drvdata->gpio_data);
 | |
| 	if (unlikely(data < 0)) {
 | |
| 		dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n",
 | |
| 			data);
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	switch (cnt) {
 | |
| 	case PS2_START_BIT:
 | |
| 		/* start bit should be low */
 | |
| 		if (unlikely(data)) {
 | |
| 			dev_err(drvdata->dev, "RX: start bit should be low\n");
 | |
| 			goto err;
 | |
| 		}
 | |
| 		break;
 | |
| 	case PS2_DATA_BIT0:
 | |
| 	case PS2_DATA_BIT1:
 | |
| 	case PS2_DATA_BIT2:
 | |
| 	case PS2_DATA_BIT3:
 | |
| 	case PS2_DATA_BIT4:
 | |
| 	case PS2_DATA_BIT5:
 | |
| 	case PS2_DATA_BIT6:
 | |
| 	case PS2_DATA_BIT7:
 | |
| 		/* processing data bits */
 | |
| 		if (data)
 | |
| 			byte |= (data << (cnt - 1));
 | |
| 		break;
 | |
| 	case PS2_PARITY_BIT:
 | |
| 		/* check odd parity */
 | |
| 		if (!((hweight8(byte) & 1) ^ data)) {
 | |
| 			rxflags |= SERIO_PARITY;
 | |
| 			dev_warn(drvdata->dev, "RX: parity error\n");
 | |
| 			if (!drvdata->write_enable)
 | |
| 				goto err;
 | |
| 		}
 | |
| 
 | |
| 		/* Do not send spurious ACK's and NACK's when write fn is
 | |
| 		 * not provided.
 | |
| 		 */
 | |
| 		if (!drvdata->write_enable) {
 | |
| 			if (byte == PS2_DEV_RET_NACK)
 | |
| 				goto err;
 | |
| 			else if (byte == PS2_DEV_RET_ACK)
 | |
| 				break;
 | |
| 		}
 | |
| 
 | |
| 		/* Let's send the data without waiting for the stop bit to be
 | |
| 		 * sent. It may happen that we miss the stop bit. When this
 | |
| 		 * happens we have no way to recover from this, certainly
 | |
| 		 * missing the parity bit would be recognized when processing
 | |
| 		 * the stop bit. When missing both, data is lost.
 | |
| 		 */
 | |
| 		serio_interrupt(drvdata->serio, byte, rxflags);
 | |
| 		dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte);
 | |
| 		break;
 | |
| 	case PS2_STOP_BIT:
 | |
| 		/* stop bit should be high */
 | |
| 		if (unlikely(!data)) {
 | |
| 			dev_err(drvdata->dev, "RX: stop bit should be high\n");
 | |
| 			goto err;
 | |
| 		}
 | |
| 		cnt = byte = 0;
 | |
| 		old_jiffies = 0;
 | |
| 		goto end; /* success */
 | |
| 	default:
 | |
| 		dev_err(drvdata->dev, "RX: got out of sync with the device\n");
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	cnt++;
 | |
| 	goto end; /* success */
 | |
| 
 | |
| err:
 | |
| 	cnt = byte = 0;
 | |
| 	old_jiffies = 0;
 | |
| 	__ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND);
 | |
| end:
 | |
| 	drvdata->rx_cnt = cnt;
 | |
| 	drvdata->rx_byte = byte;
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata)
 | |
| {
 | |
| 	unsigned char byte, cnt;
 | |
| 	int data;
 | |
| 	static unsigned long old_jiffies;
 | |
| 
 | |
| 	cnt = drvdata->tx_cnt;
 | |
| 	byte = drvdata->tx_byte;
 | |
| 
 | |
| 	if (old_jiffies == 0)
 | |
| 		old_jiffies = jiffies;
 | |
| 
 | |
| 	if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) {
 | |
| 		dev_err(drvdata->dev,
 | |
| 			"TX: timeout, probably we missed an interrupt\n");
 | |
| 		goto err;
 | |
| 	}
 | |
| 	old_jiffies = jiffies;
 | |
| 
 | |
| 	switch (cnt) {
 | |
| 	case PS2_START_BIT:
 | |
| 		/* should never happen */
 | |
| 		dev_err(drvdata->dev,
 | |
| 			"TX: start bit should have been sent already\n");
 | |
| 		goto err;
 | |
| 	case PS2_DATA_BIT0:
 | |
| 	case PS2_DATA_BIT1:
 | |
| 	case PS2_DATA_BIT2:
 | |
| 	case PS2_DATA_BIT3:
 | |
| 	case PS2_DATA_BIT4:
 | |
| 	case PS2_DATA_BIT5:
 | |
| 	case PS2_DATA_BIT6:
 | |
| 	case PS2_DATA_BIT7:
 | |
| 		data = byte & BIT(cnt - 1);
 | |
| 		gpiod_set_value(drvdata->gpio_data, data);
 | |
| 		break;
 | |
| 	case PS2_PARITY_BIT:
 | |
| 		/* do odd parity */
 | |
| 		data = !(hweight8(byte) & 1);
 | |
| 		gpiod_set_value(drvdata->gpio_data, data);
 | |
| 		break;
 | |
| 	case PS2_STOP_BIT:
 | |
| 		/* release data line to generate stop bit */
 | |
| 		gpiod_direction_input(drvdata->gpio_data);
 | |
| 		break;
 | |
| 	case PS2_TX_TIMEOUT:
 | |
| 		/* Devices generate one extra clock pulse before sending the
 | |
| 		 * acknowledgment.
 | |
| 		 */
 | |
| 		break;
 | |
| 	case PS2_ACK_BIT:
 | |
| 		gpiod_direction_input(drvdata->gpio_data);
 | |
| 		data = gpiod_get_value(drvdata->gpio_data);
 | |
| 		if (data) {
 | |
| 			dev_warn(drvdata->dev, "TX: received NACK, retry\n");
 | |
| 			goto err;
 | |
| 		}
 | |
| 
 | |
| 		drvdata->mode = PS2_MODE_RX;
 | |
| 		complete(&drvdata->tx_done);
 | |
| 
 | |
| 		cnt = 1;
 | |
| 		old_jiffies = 0;
 | |
| 		goto end; /* success */
 | |
| 	default:
 | |
| 		/* Probably we missed the stop bit. Therefore we release data
 | |
| 		 * line and try again.
 | |
| 		 */
 | |
| 		gpiod_direction_input(drvdata->gpio_data);
 | |
| 		dev_err(drvdata->dev, "TX: got out of sync with the device\n");
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	cnt++;
 | |
| 	goto end; /* success */
 | |
| 
 | |
| err:
 | |
| 	cnt = 1;
 | |
| 	old_jiffies = 0;
 | |
| 	gpiod_direction_input(drvdata->gpio_data);
 | |
| 	__ps2_gpio_write(drvdata->serio, drvdata->tx_byte);
 | |
| end:
 | |
| 	drvdata->tx_cnt = cnt;
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static irqreturn_t ps2_gpio_irq(int irq, void *dev_id)
 | |
| {
 | |
| 	struct ps2_gpio_data *drvdata = dev_id;
 | |
| 
 | |
| 	return drvdata->mode ? ps2_gpio_irq_tx(drvdata) :
 | |
| 		ps2_gpio_irq_rx(drvdata);
 | |
| }
 | |
| 
 | |
| static int ps2_gpio_get_props(struct device *dev,
 | |
| 				 struct ps2_gpio_data *drvdata)
 | |
| {
 | |
| 	drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN);
 | |
| 	if (IS_ERR(drvdata->gpio_data)) {
 | |
| 		dev_err(dev, "failed to request data gpio: %ld",
 | |
| 			PTR_ERR(drvdata->gpio_data));
 | |
| 		return PTR_ERR(drvdata->gpio_data);
 | |
| 	}
 | |
| 
 | |
| 	drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN);
 | |
| 	if (IS_ERR(drvdata->gpio_clk)) {
 | |
| 		dev_err(dev, "failed to request clock gpio: %ld",
 | |
| 			PTR_ERR(drvdata->gpio_clk));
 | |
| 		return PTR_ERR(drvdata->gpio_clk);
 | |
| 	}
 | |
| 
 | |
| 	drvdata->write_enable = device_property_read_bool(dev,
 | |
| 				"write-enable");
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ps2_gpio_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct ps2_gpio_data *drvdata;
 | |
| 	struct serio *serio;
 | |
| 	struct device *dev = &pdev->dev;
 | |
| 	int error;
 | |
| 
 | |
| 	drvdata = devm_kzalloc(dev, sizeof(struct ps2_gpio_data), GFP_KERNEL);
 | |
| 	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
 | |
| 	if (!drvdata || !serio) {
 | |
| 		error = -ENOMEM;
 | |
| 		goto err_free_serio;
 | |
| 	}
 | |
| 
 | |
| 	error = ps2_gpio_get_props(dev, drvdata);
 | |
| 	if (error)
 | |
| 		goto err_free_serio;
 | |
| 
 | |
| 	if (gpiod_cansleep(drvdata->gpio_data) ||
 | |
| 	    gpiod_cansleep(drvdata->gpio_clk)) {
 | |
| 		dev_err(dev, "GPIO data or clk are connected via slow bus\n");
 | |
| 		error = -EINVAL;
 | |
| 		goto err_free_serio;
 | |
| 	}
 | |
| 
 | |
| 	drvdata->irq = platform_get_irq(pdev, 0);
 | |
| 	if (drvdata->irq < 0) {
 | |
| 		dev_err(dev, "failed to get irq from platform resource: %d\n",
 | |
| 			drvdata->irq);
 | |
| 		error = drvdata->irq;
 | |
| 		goto err_free_serio;
 | |
| 	}
 | |
| 
 | |
| 	error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq,
 | |
| 				 IRQF_NO_THREAD, DRIVER_NAME, drvdata);
 | |
| 	if (error) {
 | |
| 		dev_err(dev, "failed to request irq %d: %d\n",
 | |
| 			drvdata->irq, error);
 | |
| 		goto err_free_serio;
 | |
| 	}
 | |
| 
 | |
| 	/* Keep irq disabled until serio->open is called. */
 | |
| 	disable_irq(drvdata->irq);
 | |
| 
 | |
| 	serio->id.type = SERIO_8042;
 | |
| 	serio->open = ps2_gpio_open;
 | |
| 	serio->close = ps2_gpio_close;
 | |
| 	/* Write can be enabled in platform/dt data, but possibly it will not
 | |
| 	 * work because of the tough timings.
 | |
| 	 */
 | |
| 	serio->write = drvdata->write_enable ? ps2_gpio_write : NULL;
 | |
| 	serio->port_data = drvdata;
 | |
| 	serio->dev.parent = dev;
 | |
| 	strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
 | |
| 	strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));
 | |
| 
 | |
| 	drvdata->serio = serio;
 | |
| 	drvdata->dev = dev;
 | |
| 	drvdata->mode = PS2_MODE_RX;
 | |
| 
 | |
| 	/* Tx count always starts at 1, as the start bit is sent implicitly by
 | |
| 	 * host-to-device communication initialization.
 | |
| 	 */
 | |
| 	drvdata->tx_cnt = 1;
 | |
| 
 | |
| 	INIT_DELAYED_WORK(&drvdata->tx_work, ps2_gpio_tx_work_fn);
 | |
| 	init_completion(&drvdata->tx_done);
 | |
| 	mutex_init(&drvdata->tx_mutex);
 | |
| 
 | |
| 	serio_register_port(serio);
 | |
| 	platform_set_drvdata(pdev, drvdata);
 | |
| 
 | |
| 	return 0;	/* success */
 | |
| 
 | |
| err_free_serio:
 | |
| 	kfree(serio);
 | |
| 	return error;
 | |
| }
 | |
| 
 | |
| static int ps2_gpio_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev);
 | |
| 
 | |
| 	serio_unregister_port(drvdata->serio);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #if defined(CONFIG_OF)
 | |
| static const struct of_device_id ps2_gpio_match[] = {
 | |
| 	{ .compatible = "ps2-gpio", },
 | |
| 	{ },
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, ps2_gpio_match);
 | |
| #endif
 | |
| 
 | |
| static struct platform_driver ps2_gpio_driver = {
 | |
| 	.probe		= ps2_gpio_probe,
 | |
| 	.remove		= ps2_gpio_remove,
 | |
| 	.driver = {
 | |
| 		.name = DRIVER_NAME,
 | |
| 		.of_match_table = of_match_ptr(ps2_gpio_match),
 | |
| 	},
 | |
| };
 | |
| module_platform_driver(ps2_gpio_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>");
 | |
| MODULE_DESCRIPTION("GPIO PS2 driver");
 | |
| MODULE_LICENSE("GPL v2");
 | 
