451 lines
16 KiB
C
Executable File
451 lines
16 KiB
C
Executable File
/*
|
|
* SDIO Host Controller Spec header file
|
|
* Register map and definitions for the Standard Host Controller
|
|
*
|
|
* Copyright (C) 1999-2019, Broadcom.
|
|
*
|
|
* Unless you and Broadcom execute a separate written software license
|
|
* agreement governing use of this software, this software is licensed to you
|
|
* under the terms of the GNU General Public License version 2 (the "GPL"),
|
|
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
|
|
* following added to such license:
|
|
*
|
|
* As a special exception, the copyright holders of this software give you
|
|
* permission to link this software with independent modules, and to copy and
|
|
* distribute the resulting executable under terms of your choice, provided that
|
|
* you also meet, for each linked independent module, the terms and conditions of
|
|
* the license of that module. An independent module is a module which is not
|
|
* derived from this software. The special exception does not apply to any
|
|
* modifications of the software.
|
|
*
|
|
* Notwithstanding the above, under no circumstances may you combine this
|
|
* software in any way with any other Broadcom software provided under a license
|
|
* other than the GPL, without Broadcom's express prior written consent.
|
|
*
|
|
*
|
|
* <<Broadcom-WL-IPTag/Open:>>
|
|
*
|
|
* $Id: sdioh.h 768099 2018-06-18 13:58:07Z $
|
|
*/
|
|
|
|
#ifndef _SDIOH_H
|
|
#define _SDIOH_H
|
|
|
|
#define SD_SysAddr 0x000
|
|
#define SD_BlockSize 0x004
|
|
#define SD_BlockCount 0x006
|
|
#define SD_Arg0 0x008
|
|
#define SD_Arg1 0x00A
|
|
#define SD_TransferMode 0x00C
|
|
#define SD_Command 0x00E
|
|
#define SD_Response0 0x010
|
|
#define SD_Response1 0x012
|
|
#define SD_Response2 0x014
|
|
#define SD_Response3 0x016
|
|
#define SD_Response4 0x018
|
|
#define SD_Response5 0x01A
|
|
#define SD_Response6 0x01C
|
|
#define SD_Response7 0x01E
|
|
#define SD_BufferDataPort0 0x020
|
|
#define SD_BufferDataPort1 0x022
|
|
#define SD_PresentState 0x024
|
|
#define SD_HostCntrl 0x028
|
|
#define SD_PwrCntrl 0x029
|
|
#define SD_BlockGapCntrl 0x02A
|
|
#define SD_WakeupCntrl 0x02B
|
|
#define SD_ClockCntrl 0x02C
|
|
#define SD_TimeoutCntrl 0x02E
|
|
#define SD_SoftwareReset 0x02F
|
|
#define SD_IntrStatus 0x030
|
|
#define SD_ErrorIntrStatus 0x032
|
|
#define SD_IntrStatusEnable 0x034
|
|
#define SD_ErrorIntrStatusEnable 0x036
|
|
#define SD_IntrSignalEnable 0x038
|
|
#define SD_ErrorIntrSignalEnable 0x03A
|
|
#define SD_CMD12ErrorStatus 0x03C
|
|
#define SD_Capabilities 0x040
|
|
#define SD_Capabilities3 0x044
|
|
#define SD_MaxCurCap 0x048
|
|
#define SD_MaxCurCap_Reserved 0x04C
|
|
#define SD_ADMA_ErrStatus 0x054
|
|
#define SD_ADMA_SysAddr 0x58
|
|
#define SD_SlotInterruptStatus 0x0FC
|
|
#define SD_HostControllerVersion 0x0FE
|
|
#define SD_GPIO_Reg 0x100
|
|
#define SD_GPIO_OE 0x104
|
|
#define SD_GPIO_Enable 0x108
|
|
|
|
/* SD specific registers in PCI config space */
|
|
#define SD_SlotInfo 0x40
|
|
|
|
/* HC 3.0 specific registers and offsets */
|
|
#define SD3_HostCntrl2 0x03E
|
|
/* preset regsstart and count */
|
|
#define SD3_PresetValStart 0x060
|
|
#define SD3_PresetValCount 8
|
|
/* preset-indiv regs */
|
|
#define SD3_PresetVal_init 0x060
|
|
#define SD3_PresetVal_default 0x062
|
|
#define SD3_PresetVal_HS 0x064
|
|
#define SD3_PresetVal_SDR12 0x066
|
|
#define SD3_PresetVal_SDR25 0x068
|
|
#define SD3_PresetVal_SDR50 0x06a
|
|
#define SD3_PresetVal_SDR104 0x06c
|
|
#define SD3_PresetVal_DDR50 0x06e
|
|
/* SDIO3.0 Revx specific Registers */
|
|
#define SD3_Tuning_Info_Register 0x0EC
|
|
#define SD3_WL_BT_reset_register 0x0F0
|
|
|
|
/* preset value indices */
|
|
#define SD3_PRESETVAL_INITIAL_IX 0
|
|
#define SD3_PRESETVAL_DESPEED_IX 1
|
|
#define SD3_PRESETVAL_HISPEED_IX 2
|
|
#define SD3_PRESETVAL_SDR12_IX 3
|
|
#define SD3_PRESETVAL_SDR25_IX 4
|
|
#define SD3_PRESETVAL_SDR50_IX 5
|
|
#define SD3_PRESETVAL_SDR104_IX 6
|
|
#define SD3_PRESETVAL_DDR50_IX 7
|
|
|
|
/* SD_Capabilities reg (0x040) */
|
|
#define CAP_TO_CLKFREQ_M BITFIELD_MASK(6)
|
|
#define CAP_TO_CLKFREQ_S 0
|
|
#define CAP_TO_CLKUNIT_M BITFIELD_MASK(1)
|
|
#define CAP_TO_CLKUNIT_S 7
|
|
/* Note: for sdio-2.0 case, this mask has to be 6 bits, but msb 2
|
|
bits are reserved. going ahead with 8 bits, as it is req for 3.0
|
|
*/
|
|
#define CAP_BASECLK_M BITFIELD_MASK(8)
|
|
#define CAP_BASECLK_S 8
|
|
#define CAP_MAXBLOCK_M BITFIELD_MASK(2)
|
|
#define CAP_MAXBLOCK_S 16
|
|
#define CAP_ADMA2_M BITFIELD_MASK(1)
|
|
#define CAP_ADMA2_S 19
|
|
#define CAP_ADMA1_M BITFIELD_MASK(1)
|
|
#define CAP_ADMA1_S 20
|
|
#define CAP_HIGHSPEED_M BITFIELD_MASK(1)
|
|
#define CAP_HIGHSPEED_S 21
|
|
#define CAP_DMA_M BITFIELD_MASK(1)
|
|
#define CAP_DMA_S 22
|
|
#define CAP_SUSPEND_M BITFIELD_MASK(1)
|
|
#define CAP_SUSPEND_S 23
|
|
#define CAP_VOLT_3_3_M BITFIELD_MASK(1)
|
|
#define CAP_VOLT_3_3_S 24
|
|
#define CAP_VOLT_3_0_M BITFIELD_MASK(1)
|
|
#define CAP_VOLT_3_0_S 25
|
|
#define CAP_VOLT_1_8_M BITFIELD_MASK(1)
|
|
#define CAP_VOLT_1_8_S 26
|
|
#define CAP_64BIT_HOST_M BITFIELD_MASK(1)
|
|
#define CAP_64BIT_HOST_S 28
|
|
|
|
#define SDIO_OCR_READ_FAIL (2)
|
|
|
|
#define CAP_ASYNCINT_SUP_M BITFIELD_MASK(1)
|
|
#define CAP_ASYNCINT_SUP_S 29
|
|
|
|
#define CAP_SLOTTYPE_M BITFIELD_MASK(2)
|
|
#define CAP_SLOTTYPE_S 30
|
|
|
|
#define CAP3_MSBits_OFFSET (32)
|
|
/* note: following are caps MSB32 bits.
|
|
So the bits start from 0, instead of 32. that is why
|
|
CAP3_MSBits_OFFSET is subtracted.
|
|
*/
|
|
#define CAP3_SDR50_SUP_M BITFIELD_MASK(1)
|
|
#define CAP3_SDR50_SUP_S (32 - CAP3_MSBits_OFFSET)
|
|
|
|
#define CAP3_SDR104_SUP_M BITFIELD_MASK(1)
|
|
#define CAP3_SDR104_SUP_S (33 - CAP3_MSBits_OFFSET)
|
|
|
|
#define CAP3_DDR50_SUP_M BITFIELD_MASK(1)
|
|
#define CAP3_DDR50_SUP_S (34 - CAP3_MSBits_OFFSET)
|
|
|
|
/* for knowing the clk caps in a single read */
|
|
#define CAP3_30CLKCAP_M BITFIELD_MASK(3)
|
|
#define CAP3_30CLKCAP_S (32 - CAP3_MSBits_OFFSET)
|
|
|
|
#define CAP3_DRIVTYPE_A_M BITFIELD_MASK(1)
|
|
#define CAP3_DRIVTYPE_A_S (36 - CAP3_MSBits_OFFSET)
|
|
|
|
#define CAP3_DRIVTYPE_C_M BITFIELD_MASK(1)
|
|
#define CAP3_DRIVTYPE_C_S (37 - CAP3_MSBits_OFFSET)
|
|
|
|
#define CAP3_DRIVTYPE_D_M BITFIELD_MASK(1)
|
|
#define CAP3_DRIVTYPE_D_S (38 - CAP3_MSBits_OFFSET)
|
|
|
|
#define CAP3_RETUNING_TC_M BITFIELD_MASK(4)
|
|
#define CAP3_RETUNING_TC_S (40 - CAP3_MSBits_OFFSET)
|
|
|
|
#define CAP3_TUNING_SDR50_M BITFIELD_MASK(1)
|
|
#define CAP3_TUNING_SDR50_S (45 - CAP3_MSBits_OFFSET)
|
|
|
|
#define CAP3_RETUNING_MODES_M BITFIELD_MASK(2)
|
|
#define CAP3_RETUNING_MODES_S (46 - CAP3_MSBits_OFFSET)
|
|
|
|
#define CAP3_RETUNING_TC_DISABLED (0x0)
|
|
#define CAP3_RETUNING_TC_1024S (0xB)
|
|
#define CAP3_RETUNING_TC_OTHER (0xF)
|
|
|
|
#define CAP3_CLK_MULT_M BITFIELD_MASK(8)
|
|
#define CAP3_CLK_MULT_S (48 - CAP3_MSBits_OFFSET)
|
|
|
|
#define PRESET_DRIVR_SELECT_M BITFIELD_MASK(2)
|
|
#define PRESET_DRIVR_SELECT_S 14
|
|
|
|
#define PRESET_CLK_DIV_M BITFIELD_MASK(10)
|
|
#define PRESET_CLK_DIV_S 0
|
|
|
|
/* SD_MaxCurCap reg (0x048) */
|
|
#define CAP_CURR_3_3_M BITFIELD_MASK(8)
|
|
#define CAP_CURR_3_3_S 0
|
|
#define CAP_CURR_3_0_M BITFIELD_MASK(8)
|
|
#define CAP_CURR_3_0_S 8
|
|
#define CAP_CURR_1_8_M BITFIELD_MASK(8)
|
|
#define CAP_CURR_1_8_S 16
|
|
|
|
/* SD_SysAddr: Offset 0x0000, Size 4 bytes */
|
|
|
|
/* SD_BlockSize: Offset 0x004, Size 2 bytes */
|
|
#define BLKSZ_BLKSZ_M BITFIELD_MASK(12)
|
|
#define BLKSZ_BLKSZ_S 0
|
|
#define BLKSZ_BNDRY_M BITFIELD_MASK(3)
|
|
#define BLKSZ_BNDRY_S 12
|
|
|
|
/* SD_BlockCount: Offset 0x006, size 2 bytes */
|
|
|
|
/* SD_Arg0: Offset 0x008, size = 4 bytes */
|
|
/* SD_TransferMode Offset 0x00C, size = 2 bytes */
|
|
#define XFER_DMA_ENABLE_M BITFIELD_MASK(1)
|
|
#define XFER_DMA_ENABLE_S 0
|
|
#define XFER_BLK_COUNT_EN_M BITFIELD_MASK(1)
|
|
#define XFER_BLK_COUNT_EN_S 1
|
|
#define XFER_CMD_12_EN_M BITFIELD_MASK(1)
|
|
#define XFER_CMD_12_EN_S 2
|
|
#define XFER_DATA_DIRECTION_M BITFIELD_MASK(1)
|
|
#define XFER_DATA_DIRECTION_S 4
|
|
#define XFER_MULTI_BLOCK_M BITFIELD_MASK(1)
|
|
#define XFER_MULTI_BLOCK_S 5
|
|
|
|
/* SD_Command: Offset 0x00E, size = 2 bytes */
|
|
/* resp_type field */
|
|
#define RESP_TYPE_NONE 0
|
|
#define RESP_TYPE_136 1
|
|
#define RESP_TYPE_48 2
|
|
#define RESP_TYPE_48_BUSY 3
|
|
/* type field */
|
|
#define CMD_TYPE_NORMAL 0
|
|
#define CMD_TYPE_SUSPEND 1
|
|
#define CMD_TYPE_RESUME 2
|
|
#define CMD_TYPE_ABORT 3
|
|
|
|
#define CMD_RESP_TYPE_M BITFIELD_MASK(2) /* Bits [0-1] - Response type */
|
|
#define CMD_RESP_TYPE_S 0
|
|
#define CMD_CRC_EN_M BITFIELD_MASK(1) /* Bit 3 - CRC enable */
|
|
#define CMD_CRC_EN_S 3
|
|
#define CMD_INDEX_EN_M BITFIELD_MASK(1) /* Bit 4 - Enable index checking */
|
|
#define CMD_INDEX_EN_S 4
|
|
#define CMD_DATA_EN_M BITFIELD_MASK(1) /* Bit 5 - Using DAT line */
|
|
#define CMD_DATA_EN_S 5
|
|
#define CMD_TYPE_M BITFIELD_MASK(2) /* Bit [6-7] - Normal, abort, resume, etc
|
|
*/
|
|
#define CMD_TYPE_S 6
|
|
#define CMD_INDEX_M BITFIELD_MASK(6) /* Bits [8-13] - Command number */
|
|
#define CMD_INDEX_S 8
|
|
|
|
/* SD_BufferDataPort0 : Offset 0x020, size = 2 or 4 bytes */
|
|
/* SD_BufferDataPort1 : Offset 0x022, size = 2 bytes */
|
|
/* SD_PresentState : Offset 0x024, size = 4 bytes */
|
|
#define PRES_CMD_INHIBIT_M BITFIELD_MASK(1) /* Bit 0 May use CMD */
|
|
#define PRES_CMD_INHIBIT_S 0
|
|
#define PRES_DAT_INHIBIT_M BITFIELD_MASK(1) /* Bit 1 May use DAT */
|
|
#define PRES_DAT_INHIBIT_S 1
|
|
#define PRES_DAT_BUSY_M BITFIELD_MASK(1) /* Bit 2 DAT is busy */
|
|
#define PRES_DAT_BUSY_S 2
|
|
#define PRES_PRESENT_RSVD_M BITFIELD_MASK(5) /* Bit [3-7] rsvd */
|
|
#define PRES_PRESENT_RSVD_S 3
|
|
#define PRES_WRITE_ACTIVE_M BITFIELD_MASK(1) /* Bit 8 Write is active */
|
|
#define PRES_WRITE_ACTIVE_S 8
|
|
#define PRES_READ_ACTIVE_M BITFIELD_MASK(1) /* Bit 9 Read is active */
|
|
#define PRES_READ_ACTIVE_S 9
|
|
#define PRES_WRITE_DATA_RDY_M BITFIELD_MASK(1) /* Bit 10 Write buf is avail */
|
|
#define PRES_WRITE_DATA_RDY_S 10
|
|
#define PRES_READ_DATA_RDY_M BITFIELD_MASK(1) /* Bit 11 Read buf data avail */
|
|
#define PRES_READ_DATA_RDY_S 11
|
|
#define PRES_CARD_PRESENT_M BITFIELD_MASK(1) /* Bit 16 Card present - debounced */
|
|
#define PRES_CARD_PRESENT_S 16
|
|
#define PRES_CARD_STABLE_M BITFIELD_MASK(1) /* Bit 17 Debugging */
|
|
#define PRES_CARD_STABLE_S 17
|
|
#define PRES_CARD_PRESENT_RAW_M BITFIELD_MASK(1) /* Bit 18 Not debounced */
|
|
#define PRES_CARD_PRESENT_RAW_S 18
|
|
#define PRES_WRITE_ENABLED_M BITFIELD_MASK(1) /* Bit 19 Write protected? */
|
|
#define PRES_WRITE_ENABLED_S 19
|
|
#define PRES_DAT_SIGNAL_M BITFIELD_MASK(4) /* Bit [20-23] Debugging */
|
|
#define PRES_DAT_SIGNAL_S 20
|
|
#define PRES_CMD_SIGNAL_M BITFIELD_MASK(1) /* Bit 24 Debugging */
|
|
#define PRES_CMD_SIGNAL_S 24
|
|
|
|
/* SD_HostCntrl: Offset 0x028, size = 1 bytes */
|
|
#define HOST_LED_M BITFIELD_MASK(1) /* Bit 0 LED On/Off */
|
|
#define HOST_LED_S 0
|
|
#define HOST_DATA_WIDTH_M BITFIELD_MASK(1) /* Bit 1 4 bit enable */
|
|
#define HOST_DATA_WIDTH_S 1
|
|
#define HOST_HI_SPEED_EN_M BITFIELD_MASK(1) /* Bit 2 High speed vs low speed */
|
|
#define HOST_DMA_SEL_S 3
|
|
#define HOST_DMA_SEL_M BITFIELD_MASK(2) /* Bit 4:3 DMA Select */
|
|
#define HOST_HI_SPEED_EN_S 2
|
|
|
|
/* Host Control2: */
|
|
#define HOSTCtrl2_PRESVAL_EN_M BITFIELD_MASK(1) /* 1 bit */
|
|
#define HOSTCtrl2_PRESVAL_EN_S 15 /* bit# */
|
|
|
|
#define HOSTCtrl2_ASYINT_EN_M BITFIELD_MASK(1) /* 1 bit */
|
|
#define HOSTCtrl2_ASYINT_EN_S 14 /* bit# */
|
|
|
|
#define HOSTCtrl2_SAMPCLK_SEL_M BITFIELD_MASK(1) /* 1 bit */
|
|
#define HOSTCtrl2_SAMPCLK_SEL_S 7 /* bit# */
|
|
|
|
#define HOSTCtrl2_EXEC_TUNING_M BITFIELD_MASK(1) /* 1 bit */
|
|
#define HOSTCtrl2_EXEC_TUNING_S 6 /* bit# */
|
|
|
|
#define HOSTCtrl2_DRIVSTRENGTH_SEL_M BITFIELD_MASK(2) /* 2 bit */
|
|
#define HOSTCtrl2_DRIVSTRENGTH_SEL_S 4 /* bit# */
|
|
|
|
#define HOSTCtrl2_1_8SIG_EN_M BITFIELD_MASK(1) /* 1 bit */
|
|
#define HOSTCtrl2_1_8SIG_EN_S 3 /* bit# */
|
|
|
|
#define HOSTCtrl2_UHSMODE_SEL_M BITFIELD_MASK(3) /* 3 bit */
|
|
#define HOSTCtrl2_UHSMODE_SEL_S 0 /* bit# */
|
|
|
|
#define HOST_CONTR_VER_2 (1)
|
|
#define HOST_CONTR_VER_3 (2)
|
|
|
|
/* misc defines */
|
|
#define SD1_MODE 0x1 /* SD Host Cntrlr Spec */
|
|
#define SD4_MODE 0x2 /* SD Host Cntrlr Spec */
|
|
|
|
/* SD_PwrCntrl: Offset 0x029, size = 1 bytes */
|
|
#define PWR_BUS_EN_M BITFIELD_MASK(1) /* Bit 0 Power the bus */
|
|
#define PWR_BUS_EN_S 0
|
|
#define PWR_VOLTS_M BITFIELD_MASK(3) /* Bit [1-3] Voltage Select */
|
|
#define PWR_VOLTS_S 1
|
|
|
|
/* SD_SoftwareReset: Offset 0x02F, size = 1 byte */
|
|
#define SW_RESET_ALL_M BITFIELD_MASK(1) /* Bit 0 Reset All */
|
|
#define SW_RESET_ALL_S 0
|
|
#define SW_RESET_CMD_M BITFIELD_MASK(1) /* Bit 1 CMD Line Reset */
|
|
#define SW_RESET_CMD_S 1
|
|
#define SW_RESET_DAT_M BITFIELD_MASK(1) /* Bit 2 DAT Line Reset */
|
|
#define SW_RESET_DAT_S 2
|
|
|
|
/* SD_IntrStatus: Offset 0x030, size = 2 bytes */
|
|
/* Defs also serve SD_IntrStatusEnable and SD_IntrSignalEnable */
|
|
#define INTSTAT_CMD_COMPLETE_M BITFIELD_MASK(1) /* Bit 0 */
|
|
#define INTSTAT_CMD_COMPLETE_S 0
|
|
#define INTSTAT_XFER_COMPLETE_M BITFIELD_MASK(1)
|
|
#define INTSTAT_XFER_COMPLETE_S 1
|
|
#define INTSTAT_BLOCK_GAP_EVENT_M BITFIELD_MASK(1)
|
|
#define INTSTAT_BLOCK_GAP_EVENT_S 2
|
|
#define INTSTAT_DMA_INT_M BITFIELD_MASK(1)
|
|
#define INTSTAT_DMA_INT_S 3
|
|
#define INTSTAT_BUF_WRITE_READY_M BITFIELD_MASK(1)
|
|
#define INTSTAT_BUF_WRITE_READY_S 4
|
|
#define INTSTAT_BUF_READ_READY_M BITFIELD_MASK(1)
|
|
#define INTSTAT_BUF_READ_READY_S 5
|
|
#define INTSTAT_CARD_INSERTION_M BITFIELD_MASK(1)
|
|
#define INTSTAT_CARD_INSERTION_S 6
|
|
#define INTSTAT_CARD_REMOVAL_M BITFIELD_MASK(1)
|
|
#define INTSTAT_CARD_REMOVAL_S 7
|
|
#define INTSTAT_CARD_INT_M BITFIELD_MASK(1)
|
|
#define INTSTAT_CARD_INT_S 8
|
|
#define INTSTAT_RETUNING_INT_M BITFIELD_MASK(1) /* Bit 12 */
|
|
#define INTSTAT_RETUNING_INT_S 12
|
|
#define INTSTAT_ERROR_INT_M BITFIELD_MASK(1) /* Bit 15 */
|
|
#define INTSTAT_ERROR_INT_S 15
|
|
|
|
/* SD_ErrorIntrStatus: Offset 0x032, size = 2 bytes */
|
|
/* Defs also serve SD_ErrorIntrStatusEnable and SD_ErrorIntrSignalEnable */
|
|
#define ERRINT_CMD_TIMEOUT_M BITFIELD_MASK(1)
|
|
#define ERRINT_CMD_TIMEOUT_S 0
|
|
#define ERRINT_CMD_CRC_M BITFIELD_MASK(1)
|
|
#define ERRINT_CMD_CRC_S 1
|
|
#define ERRINT_CMD_ENDBIT_M BITFIELD_MASK(1)
|
|
#define ERRINT_CMD_ENDBIT_S 2
|
|
#define ERRINT_CMD_INDEX_M BITFIELD_MASK(1)
|
|
#define ERRINT_CMD_INDEX_S 3
|
|
#define ERRINT_DATA_TIMEOUT_M BITFIELD_MASK(1)
|
|
#define ERRINT_DATA_TIMEOUT_S 4
|
|
#define ERRINT_DATA_CRC_M BITFIELD_MASK(1)
|
|
#define ERRINT_DATA_CRC_S 5
|
|
#define ERRINT_DATA_ENDBIT_M BITFIELD_MASK(1)
|
|
#define ERRINT_DATA_ENDBIT_S 6
|
|
#define ERRINT_CURRENT_LIMIT_M BITFIELD_MASK(1)
|
|
#define ERRINT_CURRENT_LIMIT_S 7
|
|
#define ERRINT_AUTO_CMD12_M BITFIELD_MASK(1)
|
|
#define ERRINT_AUTO_CMD12_S 8
|
|
#define ERRINT_VENDOR_M BITFIELD_MASK(4)
|
|
#define ERRINT_VENDOR_S 12
|
|
#define ERRINT_ADMA_M BITFIELD_MASK(1)
|
|
#define ERRINT_ADMA_S 9
|
|
|
|
/* Also provide definitions in "normal" form to allow combined masks */
|
|
#define ERRINT_CMD_TIMEOUT_BIT 0x0001
|
|
#define ERRINT_CMD_CRC_BIT 0x0002
|
|
#define ERRINT_CMD_ENDBIT_BIT 0x0004
|
|
#define ERRINT_CMD_INDEX_BIT 0x0008
|
|
#define ERRINT_DATA_TIMEOUT_BIT 0x0010
|
|
#define ERRINT_DATA_CRC_BIT 0x0020
|
|
#define ERRINT_DATA_ENDBIT_BIT 0x0040
|
|
#define ERRINT_CURRENT_LIMIT_BIT 0x0080
|
|
#define ERRINT_AUTO_CMD12_BIT 0x0100
|
|
#define ERRINT_ADMA_BIT 0x0200
|
|
|
|
/* Masks to select CMD vs. DATA errors */
|
|
#define ERRINT_CMD_ERRS (ERRINT_CMD_TIMEOUT_BIT | ERRINT_CMD_CRC_BIT |\
|
|
ERRINT_CMD_ENDBIT_BIT | ERRINT_CMD_INDEX_BIT)
|
|
#define ERRINT_DATA_ERRS (ERRINT_DATA_TIMEOUT_BIT | ERRINT_DATA_CRC_BIT |\
|
|
ERRINT_DATA_ENDBIT_BIT | ERRINT_ADMA_BIT)
|
|
#define ERRINT_TRANSFER_ERRS (ERRINT_CMD_ERRS | ERRINT_DATA_ERRS)
|
|
|
|
/* SD_WakeupCntr_BlockGapCntrl : Offset 0x02A , size = bytes */
|
|
/* SD_ClockCntrl : Offset 0x02C , size = bytes */
|
|
/* SD_SoftwareReset_TimeoutCntrl : Offset 0x02E , size = bytes */
|
|
/* SD_IntrStatus : Offset 0x030 , size = bytes */
|
|
/* SD_ErrorIntrStatus : Offset 0x032 , size = bytes */
|
|
/* SD_IntrStatusEnable : Offset 0x034 , size = bytes */
|
|
/* SD_ErrorIntrStatusEnable : Offset 0x036 , size = bytes */
|
|
/* SD_IntrSignalEnable : Offset 0x038 , size = bytes */
|
|
/* SD_ErrorIntrSignalEnable : Offset 0x03A , size = bytes */
|
|
/* SD_CMD12ErrorStatus : Offset 0x03C , size = bytes */
|
|
/* SD_Capabilities : Offset 0x040 , size = bytes */
|
|
/* SD_MaxCurCap : Offset 0x048 , size = bytes */
|
|
/* SD_MaxCurCap_Reserved: Offset 0x04C , size = bytes */
|
|
/* SD_SlotInterruptStatus: Offset 0x0FC , size = bytes */
|
|
/* SD_HostControllerVersion : Offset 0x0FE , size = bytes */
|
|
|
|
/* SDIO Host Control Register DMA Mode Definitions */
|
|
#define SDIOH_SDMA_MODE 0
|
|
#define SDIOH_ADMA1_MODE 1
|
|
#define SDIOH_ADMA2_MODE 2
|
|
#define SDIOH_ADMA2_64_MODE 3
|
|
|
|
#define ADMA2_ATTRIBUTE_VALID (1 << 0) /* ADMA Descriptor line valid */
|
|
#define ADMA2_ATTRIBUTE_END (1 << 1) /* End of Descriptor */
|
|
#define ADMA2_ATTRIBUTE_INT (1 << 2) /* Interrupt when line is done */
|
|
#define ADMA2_ATTRIBUTE_ACT_NOP (0 << 4) /* Skip current line, go to next. */
|
|
#define ADMA2_ATTRIBUTE_ACT_RSV (1 << 4) /* Same as NOP */
|
|
#define ADMA1_ATTRIBUTE_ACT_SET (1 << 4) /* ADMA1 Only - set transfer length */
|
|
#define ADMA2_ATTRIBUTE_ACT_TRAN (2 << 4) /* Transfer Data of one descriptor line. */
|
|
#define ADMA2_ATTRIBUTE_ACT_LINK (3 << 4) /* Link Descriptor */
|
|
|
|
/* ADMA2 Descriptor Table Entry for 32-bit Address */
|
|
typedef struct adma2_dscr_32b {
|
|
uint32 len_attr;
|
|
uint32 phys_addr;
|
|
} adma2_dscr_32b_t;
|
|
|
|
/* ADMA1 Descriptor Table Entry */
|
|
typedef struct adma1_dscr {
|
|
uint32 phys_addr_attr;
|
|
} adma1_dscr_t;
|
|
|
|
#endif /* _SDIOH_H */
|