508 lines
13 KiB
Plaintext
508 lines
13 KiB
Plaintext
/*
|
|
* Copyright 2017 Chen-Yu Tsai <wens@csie.org>
|
|
* Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/sun8i-r40-ccu.h>
|
|
#include <dt-bindings/reset/sun8i-r40-ccu.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&gic>;
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
osc24M: osc24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc24M";
|
|
};
|
|
|
|
osc32k: osc32k {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc32k";
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
|
|
cpu@2 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
};
|
|
|
|
cpu@3 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
nmi_intc: interrupt-controller@1c00030 {
|
|
compatible = "allwinner,sun7i-a20-sc-nmi";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x01c00030 0x0c>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
mmc0: mmc@1c0f000 {
|
|
compatible = "allwinner,sun8i-r40-mmc",
|
|
"allwinner,sun50i-a64-mmc";
|
|
reg = <0x01c0f000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
|
|
clock-names = "ahb", "mmc";
|
|
resets = <&ccu RST_BUS_MMC0>;
|
|
reset-names = "ahb";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc1: mmc@1c10000 {
|
|
compatible = "allwinner,sun8i-r40-mmc",
|
|
"allwinner,sun50i-a64-mmc";
|
|
reg = <0x01c10000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
|
|
clock-names = "ahb", "mmc";
|
|
resets = <&ccu RST_BUS_MMC1>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc2: mmc@1c11000 {
|
|
compatible = "allwinner,sun8i-r40-emmc",
|
|
"allwinner,sun50i-a64-emmc";
|
|
reg = <0x01c11000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
|
|
clock-names = "ahb", "mmc";
|
|
resets = <&ccu RST_BUS_MMC2>;
|
|
reset-names = "ahb";
|
|
pinctrl-0 = <&mmc2_pins>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc3: mmc@1c12000 {
|
|
compatible = "allwinner,sun8i-r40-mmc",
|
|
"allwinner,sun50i-a64-mmc";
|
|
reg = <0x01c12000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
|
|
clock-names = "ahb", "mmc";
|
|
resets = <&ccu RST_BUS_MMC3>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
usbphy: phy@1c13400 {
|
|
compatible = "allwinner,sun8i-r40-usb-phy";
|
|
reg = <0x01c13400 0x14>,
|
|
<0x01c14800 0x4>,
|
|
<0x01c19800 0x4>,
|
|
<0x01c1c800 0x4>;
|
|
reg-names = "phy_ctrl",
|
|
"pmu0",
|
|
"pmu1",
|
|
"pmu2";
|
|
clocks = <&ccu CLK_USB_PHY0>,
|
|
<&ccu CLK_USB_PHY1>,
|
|
<&ccu CLK_USB_PHY2>;
|
|
clock-names = "usb0_phy",
|
|
"usb1_phy",
|
|
"usb2_phy";
|
|
resets = <&ccu RST_USB_PHY0>,
|
|
<&ccu RST_USB_PHY1>,
|
|
<&ccu RST_USB_PHY2>;
|
|
reset-names = "usb0_reset",
|
|
"usb1_reset",
|
|
"usb2_reset";
|
|
status = "disabled";
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
ehci1: usb@1c19000 {
|
|
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
|
|
reg = <0x01c19000 0x100>;
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_EHCI1>;
|
|
resets = <&ccu RST_BUS_EHCI1>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci1: usb@1c19400 {
|
|
compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
|
|
reg = <0x01c19400 0x100>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_OHCI1>,
|
|
<&ccu CLK_USB_OHCI1>;
|
|
resets = <&ccu RST_BUS_OHCI1>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci2: usb@1c1c000 {
|
|
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
|
|
reg = <0x01c1c000 0x100>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_EHCI2>;
|
|
resets = <&ccu RST_BUS_EHCI2>;
|
|
phys = <&usbphy 2>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci2: usb@1c1c400 {
|
|
compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
|
|
reg = <0x01c1c400 0x100>;
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_OHCI2>,
|
|
<&ccu CLK_USB_OHCI2>;
|
|
resets = <&ccu RST_BUS_OHCI2>;
|
|
phys = <&usbphy 2>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ccu: clock@1c20000 {
|
|
compatible = "allwinner,sun8i-r40-ccu";
|
|
reg = <0x01c20000 0x400>;
|
|
clocks = <&osc24M>, <&osc32k>;
|
|
clock-names = "hosc", "losc";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pio: pinctrl@1c20800 {
|
|
compatible = "allwinner,sun8i-r40-pinctrl";
|
|
reg = <0x01c20800 0x400>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
|
|
clock-names = "apb", "hosc", "losc";
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#gpio-cells = <3>;
|
|
|
|
gmac_rgmii_pins: gmac-rgmii-pins {
|
|
pins = "PA0", "PA1", "PA2", "PA3",
|
|
"PA4", "PA5", "PA6", "PA7",
|
|
"PA8", "PA10", "PA11", "PA12",
|
|
"PA13", "PA15", "PA16";
|
|
function = "gmac";
|
|
/*
|
|
* data lines in RGMII mode use DDR mode
|
|
* and need a higher signal drive strength
|
|
*/
|
|
drive-strength = <40>;
|
|
};
|
|
|
|
i2c0_pins: i2c0-pins {
|
|
pins = "PB0", "PB1";
|
|
function = "i2c0";
|
|
};
|
|
|
|
mmc0_pins: mmc0-pins {
|
|
pins = "PF0", "PF1", "PF2",
|
|
"PF3", "PF4", "PF5";
|
|
function = "mmc0";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc1_pg_pins: mmc1-pg-pins {
|
|
pins = "PG0", "PG1", "PG2",
|
|
"PG3", "PG4", "PG5";
|
|
function = "mmc1";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc2_pins: mmc2-pins {
|
|
pins = "PC5", "PC6", "PC7", "PC8", "PC9",
|
|
"PC10", "PC11", "PC12", "PC13", "PC14",
|
|
"PC15", "PC24";
|
|
function = "mmc2";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
uart0_pb_pins: uart0-pb-pins {
|
|
pins = "PB22", "PB23";
|
|
function = "uart0";
|
|
};
|
|
};
|
|
|
|
wdt: watchdog@1c20c90 {
|
|
compatible = "allwinner,sun4i-a10-wdt";
|
|
reg = <0x01c20c90 0x10>;
|
|
};
|
|
|
|
uart0: serial@1c28000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28000 0x400>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART0>;
|
|
resets = <&ccu RST_BUS_UART0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@1c28400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28400 0x400>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART1>;
|
|
resets = <&ccu RST_BUS_UART1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@1c28800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28800 0x400>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART2>;
|
|
resets = <&ccu RST_BUS_UART2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@1c28c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28c00 0x400>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART3>;
|
|
resets = <&ccu RST_BUS_UART3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@1c29000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29000 0x400>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART4>;
|
|
resets = <&ccu RST_BUS_UART4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@1c29400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29400 0x400>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART5>;
|
|
resets = <&ccu RST_BUS_UART5>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart6: serial@1c29800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29800 0x400>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART6>;
|
|
resets = <&ccu RST_BUS_UART6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart7: serial@1c29c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29c00 0x400>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART7>;
|
|
resets = <&ccu RST_BUS_UART7>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@1c2ac00 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2ac00 0x400>;
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C0>;
|
|
resets = <&ccu RST_BUS_I2C0>;
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c1: i2c@1c2b000 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2b000 0x400>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C1>;
|
|
resets = <&ccu RST_BUS_I2C1>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c2: i2c@1c2b400 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2b400 0x400>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C2>;
|
|
resets = <&ccu RST_BUS_I2C2>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c3: i2c@1c2b800 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2b800 0x400>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C3>;
|
|
resets = <&ccu RST_BUS_I2C3>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c4: i2c@1c2c000 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2c000 0x400>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C4>;
|
|
resets = <&ccu RST_BUS_I2C4>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
gmac: ethernet@1c50000 {
|
|
compatible = "allwinner,sun8i-r40-gmac";
|
|
syscon = <&ccu>;
|
|
reg = <0x01c50000 0x10000>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
resets = <&ccu RST_BUS_GMAC>;
|
|
reset-names = "stmmaceth";
|
|
clocks = <&ccu CLK_BUS_GMAC>;
|
|
clock-names = "stmmaceth";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
|
|
gmac_mdio: mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@1c81000 {
|
|
compatible = "arm,gic-400";
|
|
reg = <0x01c81000 0x1000>,
|
|
<0x01c82000 0x1000>,
|
|
<0x01c84000 0x2000>,
|
|
<0x01c86000 0x2000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
};
|