nt9856x/code/driver/source/net/rtl8189fs/include/autoconf.h
2023-03-28 15:07:53 +08:00

234 lines
6.0 KiB
C
Executable File

/******************************************************************************
*
* Copyright(c) 2007 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
/*
* Public General Config
*/
#define AUTOCONF_INCLUDED
#define RTL871X_MODULE_NAME "8189FS"
#define DRV_NAME "rtl8189fs"
#ifndef CONFIG_RTL8188F
#define CONFIG_RTL8188F
#endif
#define CONFIG_SDIO_HCI
#define PLATFORM_LINUX
/*
* Wi-Fi Functions Config
*/
#define CONFIG_80211N_HT
#define CONFIG_RECV_REORDERING_CTRL
/* #define CONFIG_IOCTL_CFG80211 */ /* Set from Makefile */
#ifdef CONFIG_IOCTL_CFG80211
/*
* Indecate new sta asoc through cfg80211_new_sta
* If kernel version >= 3.2 or
* version < 3.2 but already apply cfg80211 patch,
* RTW_USE_CFG80211_STA_EVENT must be defiend!
*/
/* #define RTW_USE_CFG80211_STA_EVENT */ /* Indecate new sta asoc through cfg80211_new_sta */
#ifndef CONFIG_PLATFORM_INTEL_BYT
#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
#endif /* !CONFIG_PLATFORM_INTEL_BYT */
/* #define CONFIG_DEBUG_CFG80211 */
#define CONFIG_SET_SCAN_DENY_TIMER
#endif
#define CONFIG_AP_MODE
#ifdef CONFIG_AP_MODE
#define CONFIG_NATIVEAP_MLME
#ifndef CONFIG_NATIVEAP_MLME
#define CONFIG_HOSTAPD_MLME
#endif
#define CONFIG_FIND_BEST_CHANNEL
#endif
#define CONFIG_P2P
#ifdef CONFIG_P2P
/* Added by Albert 20110812 */
/* The CONFIG_WFD is for supporting the Wi-Fi display */
#define CONFIG_WFD
#define CONFIG_P2P_REMOVE_GROUP_INFO
/* #define CONFIG_DBG_P2P */
#define CONFIG_P2P_PS
#define CONFIG_P2P_OP_CHK_SOCIAL_CH
#define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */
/*#define CONFIG_P2P_INVITE_IOT*/
#endif
/* Added by Kurt 20110511 */
#ifdef CONFIG_TDLS
#define CONFIG_TDLS_DRIVER_SETUP
/* #ifndef CONFIG_WFD */
/* #define CONFIG_WFD */
/* #endif */
/* #define CONFIG_TDLS_AUTOSETUP */
#define CONFIG_TDLS_AUTOCHECKALIVE
/* #define CONFIG_TDLS_CH_SW */ /* Enable this flag only when we confirm that TDLS CH SW is supported in FW */
#endif
/* #define CONFIG_CONCURRENT_MODE */ /* Set from Makefile */
#ifdef CONFIG_CONCURRENT_MODE
#define CONFIG_RUNTIME_PORT_SWITCH
/* #define DBG_RUNTIME_PORT_SWITCH */
#ifndef CONFIG_RUNTIME_PORT_SWITCH
#define CONFIG_TSF_RESET_OFFLOAD /* For 2 PORT TSF SYNC. */
#endif
#endif /* CONFIG_CONCURRENT_MODE */
#define CONFIG_LAYER2_ROAMING
#define CONFIG_LAYER2_ROAMING_RESUME
/*
* Hareware/Firmware Related Config
*/
/* #define CONFIG_BT_COEXIST */ /* Set from Makefile */
/* #define CONFIG_ANTENNA_DIVERSITY */
/* #define SUPPORT_HW_RFOFF_DETECTED */
/*#define CONFIG_RTW_LED*/
#ifdef CONFIG_RTW_LED
/*#define CONFIG_RTW_SW_LED*/
#endif /* CONFIG_RTW_LED */
#define CONFIG_XMIT_ACK
#ifdef CONFIG_XMIT_ACK
#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
#endif
#define CONFIG_RF_POWER_TRIM
#define DISABLE_BB_RF 0
#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
/*
* Interface Related Config
*/
#define CONFIG_SDIO_CHK_HCI_RESUME
#define CONFIG_TX_AGGREGATION
#define SDIO_FREE_XMIT_BUF_SEMA
#define CONFIG_SDIO_RX_COPY
#define CONFIG_XMIT_THREAD_MODE
#define CONFIG_SDIO_TX_ENABLE_AVAL_INT
/* #define CONFIG_RECV_THREAD_MODE */
#ifdef CONFIG_RECV_THREAD_MODE
#define RTW_RECV_THREAD_HIGH_PRIORITY
#endif/*CONFIG_RECV_THREAD_MODE*/
/*
* Others
*/
/* #define CONFIG_MAC_LOOPBACK_DRIVER */
#define CONFIG_SKB_COPY /* for amsdu */
#define CONFIG_NEW_SIGNAL_STAT_PROCESS
#define CONFIG_EMBEDDED_FWIMG
#ifdef CONFIG_EMBEDDED_FWIMG
#define LOAD_FW_HEADER_FROM_DRIVER
#endif
/* #define CONFIG_FILE_FWIMG */
#define CONFIG_LONG_DELAY_ISSUE
/* #define CONFIG_PATCH_JOIN_WRONG_CHANNEL */
/*
* Auto Config Section
*/
#ifdef CONFIG_MAC_LOOPBACK_DRIVER
#undef CONFIG_IOCTL_CFG80211
#undef CONFIG_AP_MODE
#undef CONFIG_NATIVEAP_MLME
#undef CONFIG_POWER_SAVING
#undef CONFIG_BT_COEXIST
#undef CONFIG_ANTENNA_DIVERSITY
#undef SUPPORT_HW_RFOFF_DETECTED
#endif
#ifdef CONFIG_MP_INCLUDED
#define MP_DRIVER 1
#define CONFIG_MP_IWPRIV_SUPPORT
#else /* !CONFIG_MP_INCLUDED */
#define MP_DRIVER 0
#endif /* !CONFIG_MP_INCLUDED */
#ifdef CONFIG_POWER_SAVING
#define CONFIG_IPS
#define CONFIG_LPS
#if defined(CONFIG_LPS) && (defined(CONFIG_GSPI_HCI) || defined(CONFIG_SDIO_HCI))
#define CONFIG_LPS_LCLK
#endif
#ifdef CONFIG_LPS
#define CONFIG_CHECK_LEAVE_LPS
/* #define CONFIG_LPS_SLOW_TRANSITION */
#endif
#ifdef CONFIG_LPS_LCLK
#define CONFIG_DETECT_CPWM_BY_POLLING
#define CONFIG_LPS_RPWM_TIMER
#if defined(CONFIG_LPS_RPWM_TIMER) || defined(CONFIG_DETECT_CPWM_BY_POLLING)
#define LPS_RPWM_WAIT_MS 300
#endif
#define CONFIG_LPS_LCLK_WD_TIMER /* Watch Dog timer in LPS LCLK */
#endif
#ifdef CONFIG_IPS
#define CONFIG_IPS_CHECK_IN_WD /* Do IPS Check in WatchDog */
/* #define CONFIG_SWLPS_IN_IPS */ /* Do SW LPS flow when entering and leaving IPS */
/* #define CONFIG_FWLPS_IN_IPS */ /* issue H2C command to let FW do LPS when entering IPS */
#endif
#endif /* CONFIG_POWER_SAVING */
#ifdef CONFIG_WOWLAN
/* #define CONFIG_GTK_OL */
/* #define CONFIG_ARP_KEEP_ALIVE */
#endif /* CONFIG_WOWLAN */
#ifdef CONFIG_GPIO_WAKEUP
#ifndef WAKEUP_GPIO_IDX
#define WAKEUP_GPIO_IDX 0
#endif
#endif
/*
* Debug Related Config
*/
#ifdef CONFIG_RTW_DEBUG
#define DBG 1 /* for ODM & BTCOEX debug */
#else /* !CONFIG_RTW_DEBUG */
#define DBG 0 /* for ODM & BTCOEX debug */
#endif /* CONFIG_RTW_DEBUG */
#define DBG_CONFIG_ERROR_DETECT
/* #define DBG_XMIT_BUF */
/* #define DBG_XMIT_BUF_EXT */
/* #define DBG_CHECK_FW_PS_STATE */
/* #define DBG_CHECK_FW_PS_STATE_H2C */
/* #define CONFIG_FW_C2H_DEBUG */
#define DBG_RX_DFRAME_RAW_DATA