372 lines
12 KiB
ReStructuredText
372 lines
12 KiB
ReStructuredText
.. -*- coding: utf-8; mode: rst -*-
|
|
|
|
.. _CEC_ADAP_LOG_ADDRS:
|
|
.. _CEC_ADAP_G_LOG_ADDRS:
|
|
.. _CEC_ADAP_S_LOG_ADDRS:
|
|
|
|
****************************************************
|
|
ioctls CEC_ADAP_G_LOG_ADDRS and CEC_ADAP_S_LOG_ADDRS
|
|
****************************************************
|
|
|
|
Name
|
|
====
|
|
|
|
CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS - Get or set the logical addresses
|
|
|
|
|
|
Synopsis
|
|
========
|
|
|
|
.. c:function:: int ioctl( int fd, CEC_ADAP_G_LOG_ADDRS, struct cec_log_addrs *argp )
|
|
:name: CEC_ADAP_G_LOG_ADDRS
|
|
|
|
.. c:function:: int ioctl( int fd, CEC_ADAP_S_LOG_ADDRS, struct cec_log_addrs *argp )
|
|
:name: CEC_ADAP_S_LOG_ADDRS
|
|
|
|
Arguments
|
|
=========
|
|
|
|
``fd``
|
|
File descriptor returned by :c:func:`open() <cec-open>`.
|
|
|
|
``argp``
|
|
Pointer to struct :c:type:`cec_log_addrs`.
|
|
|
|
Description
|
|
===========
|
|
|
|
To query the current CEC logical addresses, applications call
|
|
:ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a
|
|
struct :c:type:`cec_log_addrs` where the driver stores the logical addresses.
|
|
|
|
To set new logical addresses, applications fill in
|
|
struct :c:type:`cec_log_addrs` and call :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
|
|
with a pointer to this struct. The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
|
|
is only available if ``CEC_CAP_LOG_ADDRS`` is set (the ``ENOTTY`` error code is
|
|
returned otherwise). The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
|
|
can only be called by a file descriptor in initiator mode (see :ref:`CEC_S_MODE`), if not
|
|
the ``EBUSY`` error code will be returned.
|
|
|
|
To clear existing logical addresses set ``num_log_addrs`` to 0. All other fields
|
|
will be ignored in that case. The adapter will go to the unconfigured state and the
|
|
``cec_version``, ``vendor_id`` and ``osd_name`` fields are all reset to their default
|
|
values (CEC version 2.0, no vendor ID and an empty OSD name).
|
|
|
|
If the physical address is valid (see :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`),
|
|
then this ioctl will block until all requested logical
|
|
addresses have been claimed. If the file descriptor is in non-blocking mode then it will
|
|
not wait for the logical addresses to be claimed, instead it just returns 0.
|
|
|
|
A :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` event is sent when the
|
|
logical addresses are claimed or cleared.
|
|
|
|
Attempting to call :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` when
|
|
logical address types are already defined will return with error ``EBUSY``.
|
|
|
|
.. c:type:: cec_log_addrs
|
|
|
|
.. tabularcolumns:: |p{1.0cm}|p{8.0cm}|p{7.5cm}|
|
|
|
|
.. cssclass:: longtable
|
|
|
|
.. flat-table:: struct cec_log_addrs
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 1 1 16
|
|
|
|
* - __u8
|
|
- ``log_addr[CEC_MAX_LOG_ADDRS]``
|
|
- The actual logical addresses that were claimed. This is set by the
|
|
driver. If no logical address could be claimed, then it is set to
|
|
``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then
|
|
``log_addr[0]`` is set to 0xf and all others to
|
|
``CEC_LOG_ADDR_INVALID``.
|
|
* - __u16
|
|
- ``log_addr_mask``
|
|
- The bitmask of all logical addresses this adapter has claimed. If
|
|
this adapter is Unregistered then ``log_addr_mask`` sets bit 15
|
|
and clears all other bits. If this adapter is not configured at
|
|
all, then ``log_addr_mask`` is set to 0. Set by the driver.
|
|
* - __u8
|
|
- ``cec_version``
|
|
- The CEC version that this adapter shall use. See
|
|
:ref:`cec-versions`. Used to implement the
|
|
``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages.
|
|
Note that :ref:`CEC_OP_CEC_VERSION_1_3A <CEC-OP-CEC-VERSION-1-3A>` is not allowed by the CEC
|
|
framework.
|
|
* - __u8
|
|
- ``num_log_addrs``
|
|
- Number of logical addresses to set up. Must be ≤
|
|
``available_log_addrs`` as returned by
|
|
:ref:`CEC_ADAP_G_CAPS`. All arrays in
|
|
this structure are only filled up to index
|
|
``available_log_addrs``-1. The remaining array elements will be
|
|
ignored. Note that the CEC 2.0 standard allows for a maximum of 2
|
|
logical addresses, although some hardware has support for more.
|
|
``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual
|
|
number of logical addresses it could claim, which may be less than
|
|
what was requested. If this field is set to 0, then the CEC
|
|
adapter shall clear all claimed logical addresses and all other
|
|
fields will be ignored.
|
|
* - __u32
|
|
- ``vendor_id``
|
|
- The vendor ID is a 24-bit number that identifies the specific
|
|
vendor or entity. Based on this ID vendor specific commands may be
|
|
defined. If you do not want a vendor ID then set it to
|
|
``CEC_VENDOR_ID_NONE``.
|
|
* - __u32
|
|
- ``flags``
|
|
- Flags. See :ref:`cec-log-addrs-flags` for a list of available flags.
|
|
* - char
|
|
- ``osd_name[15]``
|
|
- The On-Screen Display name as is returned by the
|
|
``CEC_MSG_SET_OSD_NAME`` message.
|
|
* - __u8
|
|
- ``primary_device_type[CEC_MAX_LOG_ADDRS]``
|
|
- Primary device type for each logical address. See
|
|
:ref:`cec-prim-dev-types` for possible types.
|
|
* - __u8
|
|
- ``log_addr_type[CEC_MAX_LOG_ADDRS]``
|
|
- Logical address types. See :ref:`cec-log-addr-types` for
|
|
possible types. The driver will update this with the actual
|
|
logical address type that it claimed (e.g. it may have to fallback
|
|
to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED <CEC-LOG-ADDR-TYPE-UNREGISTERED>`).
|
|
* - __u8
|
|
- ``all_device_types[CEC_MAX_LOG_ADDRS]``
|
|
- CEC 2.0 specific: the bit mask of all device types. See
|
|
:ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0
|
|
``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave
|
|
this field to 0, or fill it in according to the CEC 2.0 guidelines to
|
|
give the CEC framework more information about the device type, even
|
|
though the framework won't use it directly in the CEC message.
|
|
* - __u8
|
|
- ``features[CEC_MAX_LOG_ADDRS][12]``
|
|
- Features for each logical address. It is used in the CEC 2.0
|
|
``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the
|
|
RC Profile and the Device Features. For CEC 1.4 you can either leave
|
|
this field to all 0, or fill it in according to the CEC 2.0 guidelines to
|
|
give the CEC framework more information about the device type, even
|
|
though the framework won't use it directly in the CEC message.
|
|
|
|
|
|
.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}|
|
|
|
|
.. _cec-log-addrs-flags:
|
|
|
|
.. flat-table:: Flags for struct cec_log_addrs
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`:
|
|
|
|
- ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK``
|
|
- 1
|
|
- By default if no logical address of the requested type can be claimed, then
|
|
it will go back to the unconfigured state. If this flag is set, then it will
|
|
fallback to the Unregistered logical address. Note that if the Unregistered
|
|
logical address was explicitly requested, then this flag has no effect.
|
|
* .. _`CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU`:
|
|
|
|
- ``CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU``
|
|
- 2
|
|
- By default the ``CEC_MSG_USER_CONTROL_PRESSED`` and ``CEC_MSG_USER_CONTROL_RELEASED``
|
|
messages are only passed on to the follower(s), if any. If this flag is set,
|
|
then these messages are also passed on to the remote control input subsystem
|
|
and will appear as keystrokes. This features needs to be enabled explicitly.
|
|
If CEC is used to enter e.g. passwords, then you may not want to enable this
|
|
to avoid trivial snooping of the keystrokes.
|
|
* .. _`CEC-LOG-ADDRS-FL-CDC-ONLY`:
|
|
|
|
- ``CEC_LOG_ADDRS_FL_CDC_ONLY``
|
|
- 4
|
|
- If this flag is set, then the device is CDC-Only. CDC-Only CEC devices
|
|
are CEC devices that can only handle CDC messages.
|
|
|
|
All other messages are ignored.
|
|
|
|
|
|
.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}|
|
|
|
|
.. _cec-versions:
|
|
|
|
.. flat-table:: CEC Versions
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* .. _`CEC-OP-CEC-VERSION-1-3A`:
|
|
|
|
- ``CEC_OP_CEC_VERSION_1_3A``
|
|
- 4
|
|
- CEC version according to the HDMI 1.3a standard.
|
|
* .. _`CEC-OP-CEC-VERSION-1-4B`:
|
|
|
|
- ``CEC_OP_CEC_VERSION_1_4B``
|
|
- 5
|
|
- CEC version according to the HDMI 1.4b standard.
|
|
* .. _`CEC-OP-CEC-VERSION-2-0`:
|
|
|
|
- ``CEC_OP_CEC_VERSION_2_0``
|
|
- 6
|
|
- CEC version according to the HDMI 2.0 standard.
|
|
|
|
|
|
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
|
|
|
|
.. _cec-prim-dev-types:
|
|
|
|
.. flat-table:: CEC Primary Device Types
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* .. _`CEC-OP-PRIM-DEVTYPE-TV`:
|
|
|
|
- ``CEC_OP_PRIM_DEVTYPE_TV``
|
|
- 0
|
|
- Use for a TV.
|
|
* .. _`CEC-OP-PRIM-DEVTYPE-RECORD`:
|
|
|
|
- ``CEC_OP_PRIM_DEVTYPE_RECORD``
|
|
- 1
|
|
- Use for a recording device.
|
|
* .. _`CEC-OP-PRIM-DEVTYPE-TUNER`:
|
|
|
|
- ``CEC_OP_PRIM_DEVTYPE_TUNER``
|
|
- 3
|
|
- Use for a device with a tuner.
|
|
* .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`:
|
|
|
|
- ``CEC_OP_PRIM_DEVTYPE_PLAYBACK``
|
|
- 4
|
|
- Use for a playback device.
|
|
* .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`:
|
|
|
|
- ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM``
|
|
- 5
|
|
- Use for an audio system (e.g. an audio/video receiver).
|
|
* .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`:
|
|
|
|
- ``CEC_OP_PRIM_DEVTYPE_SWITCH``
|
|
- 6
|
|
- Use for a CEC switch.
|
|
* .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`:
|
|
|
|
- ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC``
|
|
- 7
|
|
- Use for a video processor device.
|
|
|
|
|
|
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
|
|
|
|
.. _cec-log-addr-types:
|
|
|
|
.. flat-table:: CEC Logical Address Types
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 1 16
|
|
|
|
* .. _`CEC-LOG-ADDR-TYPE-TV`:
|
|
|
|
- ``CEC_LOG_ADDR_TYPE_TV``
|
|
- 0
|
|
- Use for a TV.
|
|
* .. _`CEC-LOG-ADDR-TYPE-RECORD`:
|
|
|
|
- ``CEC_LOG_ADDR_TYPE_RECORD``
|
|
- 1
|
|
- Use for a recording device.
|
|
* .. _`CEC-LOG-ADDR-TYPE-TUNER`:
|
|
|
|
- ``CEC_LOG_ADDR_TYPE_TUNER``
|
|
- 2
|
|
- Use for a tuner device.
|
|
* .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`:
|
|
|
|
- ``CEC_LOG_ADDR_TYPE_PLAYBACK``
|
|
- 3
|
|
- Use for a playback device.
|
|
* .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`:
|
|
|
|
- ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM``
|
|
- 4
|
|
- Use for an audio system device.
|
|
* .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`:
|
|
|
|
- ``CEC_LOG_ADDR_TYPE_SPECIFIC``
|
|
- 5
|
|
- Use for a second TV or for a video processor device.
|
|
* .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`:
|
|
|
|
- ``CEC_LOG_ADDR_TYPE_UNREGISTERED``
|
|
- 6
|
|
- Use this if you just want to remain unregistered. Used for pure
|
|
CEC switches or CDC-only devices (CDC: Capability Discovery and
|
|
Control).
|
|
|
|
|
|
|
|
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
|
|
|
|
.. _cec-all-dev-types-flags:
|
|
|
|
.. flat-table:: CEC All Device Types Flags
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* .. _`CEC-OP-ALL-DEVTYPE-TV`:
|
|
|
|
- ``CEC_OP_ALL_DEVTYPE_TV``
|
|
- 0x80
|
|
- This supports the TV type.
|
|
* .. _`CEC-OP-ALL-DEVTYPE-RECORD`:
|
|
|
|
- ``CEC_OP_ALL_DEVTYPE_RECORD``
|
|
- 0x40
|
|
- This supports the Recording type.
|
|
* .. _`CEC-OP-ALL-DEVTYPE-TUNER`:
|
|
|
|
- ``CEC_OP_ALL_DEVTYPE_TUNER``
|
|
- 0x20
|
|
- This supports the Tuner type.
|
|
* .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`:
|
|
|
|
- ``CEC_OP_ALL_DEVTYPE_PLAYBACK``
|
|
- 0x10
|
|
- This supports the Playback type.
|
|
* .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`:
|
|
|
|
- ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM``
|
|
- 0x08
|
|
- This supports the Audio System type.
|
|
* .. _`CEC-OP-ALL-DEVTYPE-SWITCH`:
|
|
|
|
- ``CEC_OP_ALL_DEVTYPE_SWITCH``
|
|
- 0x04
|
|
- This supports the CEC Switch or Video Processing type.
|
|
|
|
|
|
|
|
Return Value
|
|
============
|
|
|
|
On success 0 is returned, on error -1 and the ``errno`` variable is set
|
|
appropriately. The generic error codes are described at the
|
|
:ref:`Generic Error Codes <gen-errors>` chapter.
|
|
|
|
The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` can return the following
|
|
error codes:
|
|
|
|
ENOTTY
|
|
The ``CEC_CAP_LOG_ADDRS`` capability wasn't set, so this ioctl is not supported.
|
|
|
|
EBUSY
|
|
The CEC adapter is currently configuring itself, or it is already configured and
|
|
``num_log_addrs`` is non-zero, or another filehandle is in exclusive follower or
|
|
initiator mode, or the filehandle is in mode ``CEC_MODE_NO_INITIATOR``.
|
|
|
|
EINVAL
|
|
The contents of struct :c:type:`cec_log_addrs` is invalid.
|