52 lines
		
	
	
		
			2.2 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			52 lines
		
	
	
		
			2.2 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
* Samsung PWM timers
 | 
						|
 | 
						|
Samsung SoCs contain PWM timer blocks which can be used for system clock source
 | 
						|
and clock event timers, as well as to drive SoC outputs with PWM signal. Each
 | 
						|
PWM timer block provides 5 PWM channels (not all of them can drive physical
 | 
						|
outputs - see SoC and board manual).
 | 
						|
 | 
						|
Be aware that the clocksource driver supports only uniprocessor systems.
 | 
						|
 | 
						|
Required properties:
 | 
						|
- compatible : should be one of following:
 | 
						|
    samsung,s3c2410-pwm - for 16-bit timers present on S3C24xx SoCs
 | 
						|
    samsung,s3c6400-pwm - for 32-bit timers present on S3C64xx SoCs
 | 
						|
    samsung,s5p6440-pwm - for 32-bit timers present on S5P64x0 SoCs
 | 
						|
    samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,
 | 
						|
			  Exynos4210 rev0 SoCs
 | 
						|
    samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,
 | 
						|
                          Exynos4x12, Exynos5250 and Exynos5420 SoCs
 | 
						|
- reg: base address and size of register area
 | 
						|
- interrupts: list of timer interrupts (one interrupt per timer, starting at
 | 
						|
  timer 0)
 | 
						|
- clock-names: should contain all following required clock names:
 | 
						|
    - "timers" - PWM base clock used to generate PWM signals,
 | 
						|
  and any subset of following optional clock names:
 | 
						|
    - "pwm-tclk0" - first external PWM clock source,
 | 
						|
    - "pwm-tclk1" - second external PWM clock source.
 | 
						|
  Note that not all IP variants allow using all external clock sources.
 | 
						|
  Refer to SoC documentation to learn which clock source configurations
 | 
						|
  are available.
 | 
						|
- clocks: should contain clock specifiers of all clocks, which input names
 | 
						|
  have been specified in clock-names property, in same order.
 | 
						|
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
 | 
						|
  the cells format. The only third cell flag supported by this binding is
 | 
						|
  PWM_POLARITY_INVERTED.
 | 
						|
 | 
						|
Optional properties:
 | 
						|
- samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular
 | 
						|
    platform - an array of up to 5 elements being indices of PWM channels
 | 
						|
    (from 0 to 4), the order does not matter.
 | 
						|
 | 
						|
Example:
 | 
						|
	pwm@7f006000 {
 | 
						|
		compatible = "samsung,s3c6400-pwm";
 | 
						|
		reg = <0x7f006000 0x1000>;
 | 
						|
		interrupt-parent = <&vic0>;
 | 
						|
		interrupts = <23>, <24>, <25>, <27>, <28>;
 | 
						|
		clocks = <&clock 67>;
 | 
						|
		clock-names = "timers";
 | 
						|
		samsung,pwm-outputs = <0>, <1>;
 | 
						|
		#pwm-cells = <3>;
 | 
						|
	}
 |