payton/nt9856x
Template
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
89892c2012
nt9856x/code/driver/source/net/rtl8723ds/include/rtl8192e_hal.h
payton cf6a40b46d 1.wifi驱动
2023-09-25 17:39:41 +08:00

331 lines
13 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2012 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#ifndef __RTL8192E_HAL_H__
#define __RTL8192E_HAL_H__
/* #include "hal_com.h" */
#include "hal_data.h"
/* include HAL Related header after HAL Related compiling flags */
#include "rtl8192e_spec.h"
#include "rtl8192e_rf.h"
#include "rtl8192e_dm.h"
#include "rtl8192e_recv.h"
#include "rtl8192e_xmit.h"
#include "rtl8192e_cmd.h"
#include "rtl8192e_led.h"
#include "Hal8192EPwrSeq.h"
#include "Hal8192EPhyReg.h"
#include "Hal8192EPhyCfg.h"
#ifdef DBG_CONFIG_ERROR_DETECT
#include "rtl8192e_sreset.h"
#endif
/* ---------------------------------------------------------------------
* RTL8192E Power Configuration CMDs for PCIe interface
* --------------------------------------------------------------------- */
#define Rtl8192E_NIC_PWR_ON_FLOW rtl8192E_power_on_flow
#define Rtl8192E_NIC_RF_OFF_FLOW rtl8192E_radio_off_flow
#define Rtl8192E_NIC_DISABLE_FLOW rtl8192E_card_disable_flow
#define Rtl8192E_NIC_ENABLE_FLOW rtl8192E_card_enable_flow
#define Rtl8192E_NIC_SUSPEND_FLOW rtl8192E_suspend_flow
#define Rtl8192E_NIC_RESUME_FLOW rtl8192E_resume_flow
#define Rtl8192E_NIC_PDN_FLOW rtl8192E_hwpdn_flow
#define Rtl8192E_NIC_LPS_ENTER_FLOW rtl8192E_enter_lps_flow
#define Rtl8192E_NIC_LPS_LEAVE_FLOW rtl8192E_leave_lps_flow
#if 1 /* download firmware related data structure */
#define FW_SIZE_8192E 0x8000 /* Compatible with RTL8192e Maximal RAM code size 32k */
#define FW_START_ADDRESS 0x1000
#define FW_END_ADDRESS 0x5FFF
#define IS_FW_HEADER_EXIST_8192E(_pFwHdr) ((GET_FIRMWARE_HDR_SIGNATURE_8192E(_pFwHdr) & 0xFFF0) == 0x92E0)
typedef struct _RT_FIRMWARE_8192E {
FIRMWARE_SOURCE eFWSource;
#ifdef CONFIG_EMBEDDED_FWIMG
u8 *szFwBuffer;
#else
u8 szFwBuffer[FW_SIZE_8192E];
#endif
u32 ulFwLength;
} RT_FIRMWARE_8192E, *PRT_FIRMWARE_8192E;
/*
* This structure must be cared byte-ordering
*
* Added by tynli. 2009.12.04. */
/* *****************************************************
* Firmware Header(8-byte alinment required)
* *****************************************************
* --- LONG WORD 0 ---- */
#define GET_FIRMWARE_HDR_SIGNATURE_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 0, 16) /* 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut */
#define GET_FIRMWARE_HDR_CATEGORY_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 16, 8) /* AP/NIC and USB/PCI */
#define GET_FIRMWARE_HDR_FUNCTION_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 24, 8) /* Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions */
#define GET_FIRMWARE_HDR_VERSION_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 0, 16)/* FW Version */
#define GET_FIRMWARE_HDR_SUB_VER_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 16, 8) /* FW Subversion, default 0x00 */
#define GET_FIRMWARE_HDR_RSVD1_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 24, 8)
/* --- LONG WORD 1 ---- */
#define GET_FIRMWARE_HDR_MONTH_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+8, 0, 8) /* Release time Month field */
#define GET_FIRMWARE_HDR_DATE_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+8, 8, 8) /* Release time Date field */
#define GET_FIRMWARE_HDR_HOUR_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+8, 16, 8)/* Release time Hour field */
#define GET_FIRMWARE_HDR_MINUTE_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+8, 24, 8)/* Release time Minute field */
#define GET_FIRMWARE_HDR_ROMCODE_SIZE_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+12, 0, 16)/* The size of RAM code */
#define GET_FIRMWARE_HDR_RSVD2_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+12, 16, 16)
/* --- LONG WORD 2 ---- */
#define GET_FIRMWARE_HDR_SVN_IDX_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+16, 0, 32)/* The SVN entry index */
#define GET_FIRMWARE_HDR_RSVD3_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+20, 0, 32)
/* --- LONG WORD 3 ---- */
#define GET_FIRMWARE_HDR_RSVD4_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 0, 32)
#define GET_FIRMWARE_HDR_RSVD5_8192E(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+28, 0, 32)
#endif /* download firmware related data structure */
#define DRIVER_EARLY_INT_TIME_8192E 0x05
#define BCN_DMA_ATIME_INT_TIME_8192E 0x02
#define RX_DMA_SIZE_8192E 0x4000 /* 16K*/
#ifdef CONFIG_WOWLAN
#define RESV_FMWF (WKFMCAM_SIZE * MAX_WKFM_CAM_NUM) /* 16 entries, for each is 24 bytes*/
#else
#define RESV_FMWF 0
#endif
#ifdef CONFIG_FW_C2H_DEBUG
#define RX_DMA_RESERVED_SIZE_8192E 0x100 /* 256B, reserved for c2h debug message*/
#else
#define RX_DMA_RESERVED_SIZE_8192E 0x40 /* 64B, reserved for c2h event(16bytes) or ccx(8 Bytes)*/
#endif
#define MAX_RX_DMA_BUFFER_SIZE_8192E (RX_DMA_SIZE_8192E-RX_DMA_RESERVED_SIZE_8192E) /*RX 16K*/
#define PAGE_SIZE_TX_92E PAGE_SIZE_256
/* For General Reserved Page Number(Beacon Queue is reserved page)
* if (CONFIG_2BCN_EN) Beacon:4, PS-Poll:1, Null Data:1,Prob Rsp:1,Qos Null Data:1
* Beacon: MAX_BEACON_LEN / PAGE_SIZE_TX_92E
* PS-Poll:1, Null Data:1,Prob Rsp:1,Qos Null Data:1,CTS-2-SELF / LTE QoS Null*/
#define RSVD_PAGE_NUM_8192E (MAX_BEACON_LEN / PAGE_SIZE_TX_92E + 6) /*0x08*/
/* For WoWLan , more reserved page
* ARP Rsp:1, RWC:1, GTK Info:1,GTK RSP:2,GTK EXT MEM:2, AOAC rpt: 1,PNO: 6
* NS offload: 2 NDP info: 1
*/
#ifdef CONFIG_WOWLAN
#define WOWLAN_PAGE_NUM_8192E 0x0b
#else
#define WOWLAN_PAGE_NUM_8192E 0x00
#endif
#ifdef CONFIG_PNO_SUPPORT
#undef WOWLAN_PAGE_NUM_8192E
#define WOWLAN_PAGE_NUM_8192E 0x0d
#endif
/* Note:
Tx FIFO Size : 64KB
Tx page Size : 256B
Total page numbers : 256(0x100)
*/
#define TOTAL_RSVD_PAGE_NUMBER_8192E (RSVD_PAGE_NUM_8192E + WOWLAN_PAGE_NUM_8192E)
#define TOTAL_PAGE_NUMBER_8192E (0x100)
#define TX_TOTAL_PAGE_NUMBER_8192E (TOTAL_PAGE_NUMBER_8192E - TOTAL_RSVD_PAGE_NUMBER_8192E)
#define TX_PAGE_BOUNDARY_8192E (TX_TOTAL_PAGE_NUMBER_8192E) /* beacon header start address */
#define RSVD_PKT_LEN_92E (TOTAL_RSVD_PAGE_NUMBER_8192E * PAGE_SIZE_TX_92E)
#define TX_PAGE_LOAD_FW_BOUNDARY_8192E 0x47 /* 0xA5 */
#define TX_PAGE_BOUNDARY_WOWLAN_8192E 0xE0
/* For Normal Chip Setting
* (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER_92C */
#define NORMAL_PAGE_NUM_HPQ_8192E 0x10
#define NORMAL_PAGE_NUM_LPQ_8192E 0x10
#define NORMAL_PAGE_NUM_NPQ_8192E 0x10
#define NORMAL_PAGE_NUM_EPQ_8192E 0x00
/* Note: For WMM Normal Chip Setting ,modify later */
#define WMM_NORMAL_PAGE_NUM_HPQ_8192E NORMAL_PAGE_NUM_HPQ_8192E
#define WMM_NORMAL_PAGE_NUM_LPQ_8192E NORMAL_PAGE_NUM_LPQ_8192E
#define WMM_NORMAL_PAGE_NUM_NPQ_8192E NORMAL_PAGE_NUM_NPQ_8192E
/* -------------------------------------------------------------------------
* Chip specific
* ------------------------------------------------------------------------- */
/* pic buffer descriptor */
#define RTL8192EE_SEG_NUM TX_BUFFER_SEG_NUM
#define TX_DESC_NUM_92E 128
#define RX_DESC_NUM_92E 128
/* -------------------------------------------------------------------------
* Channel Plan
* ------------------------------------------------------------------------- */
#define HWSET_MAX_SIZE_8192E 512
#define EFUSE_REAL_CONTENT_LEN_8192E 512
#define EFUSE_MAP_LEN_8192E 512
#define EFUSE_MAX_SECTION_8192E 64
#define EFUSE_MAX_WORD_UNIT_8192E 4
#define EFUSE_IC_ID_OFFSET_8192E 506 /* For some inferiority IC purpose. added by Roger, 2009.09.02. */
#define AVAILABLE_EFUSE_ADDR_8192E(addr) (addr < EFUSE_REAL_CONTENT_LEN_8192E)
/*
* <Roger_Notes> To prevent out of boundary programming case, leave 1byte and program full section
* 9bytes + 1byt + 5bytes and pre 1byte.
* For worst case:
* | 1byte|----8bytes----|1byte|--5bytes--|
* | | Reserved(14bytes) |
* */
#define EFUSE_OOB_PROTECT_BYTES_8192E 15 /* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */
/* ********************************************************
* EFUSE for BT definition
* ******************************************************** */
#define EFUSE_BT_REAL_BANK_CONTENT_LEN_8192E 512
#define EFUSE_BT_REAL_CONTENT_LEN_8192E 1024 /* 512*2 */
#define EFUSE_BT_MAP_LEN_8192E 1024 /* 1k bytes */
#define EFUSE_BT_MAX_SECTION_8192E 128 /* 1024/8 */
#define EFUSE_PROTECT_BYTES_BANK_8192E 16
#define EFUSE_MAX_BANK_8192E 3
/* *********************************************************** */
#define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
#define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
/* #define IS_MULTI_FUNC_CHIP(_Adapter) (((((PHAL_DATA_TYPE)(_Adapter->HalData))->MultiFunc) & (RT_MULTI_FUNC_BT|RT_MULTI_FUNC_GPS)) ? _TRUE : _FALSE) */
/* #define RT_IS_FUNC_DISABLED(__pAdapter, __FuncBits) ( (__pAdapter)->DisabledFunctions & (__FuncBits) ) */
/* rtl8812_hal_init.c */
void _8051Reset8192E(PADAPTER padapter);
s32 FirmwareDownload8192E(PADAPTER Adapter, BOOLEAN bUsedWoWLANFw);
void InitializeFirmwareVars8192E(PADAPTER padapter);
s32 InitLLTTable8192E(PADAPTER padapter, u8 txpktbuf_bndy);
/* EFuse */
u8 GetEEPROMSize8192E(PADAPTER padapter);
void hal_InitPGData_8192E(PADAPTER padapter, u8 *PROMContent);
void Hal_EfuseParseIDCode8192E(PADAPTER padapter, u8 *hwinfo);
void Hal_ReadPROMVersion8192E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadPowerSavingMode8192E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadTxPowerInfo8192E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadBoardType8192E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadThermalMeter_8192E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void Hal_ReadChannelPlan8192E(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseXtal_8192E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_ReadAntennaDiversity8192E(PADAPTER pAdapter, u8 *PROMContent, BOOLEAN AutoLoadFail);
void Hal_ReadPAType_8192E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void Hal_ReadAmplifierType_8192E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void Hal_ReadRFEType_8192E(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void Hal_EfuseParseBTCoexistInfo8192E(PADAPTER Adapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseKFreeData_8192E(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
u8 Hal_CrystalAFEAdjust(_adapter *Adapter);
BOOLEAN HalDetectPwrDownMode8192E(PADAPTER Adapter);
#if defined(CONFIG_WOWLAN) || defined(CONFIG_AP_WOWLAN)
void Hal_DetectWoWMode(PADAPTER pAdapter);
#endif /* CONFIG_WOWLAN */
/***********************************************************/
/* RTL8192E-MAC Setting */
void _InitQueueReservedPage_8192E(PADAPTER Adapter);
void _InitQueuePriority_8192E(PADAPTER Adapter);
void _InitTxBufferBoundary_8192E(PADAPTER Adapter, u8 txpktbuf_bndy);
void _InitPageBoundary_8192E(PADAPTER Adapter);
/* void _InitTransferPageSize_8192E(PADAPTER Adapter); */
void _InitDriverInfoSize_8192E(PADAPTER Adapter, u8 drvInfoSize);
void _InitRDGSetting_8192E(PADAPTER Adapter);
void _InitID_8192E(PADAPTER Adapter);
void _InitNetworkType_8192E(PADAPTER Adapter);
void _InitWMACSetting_8192E(PADAPTER Adapter);
void _InitAdaptiveCtrl_8192E(PADAPTER Adapter);
void _InitEDCA_8192E(PADAPTER Adapter);
void _InitRetryFunction_8192E(PADAPTER Adapter);
void _BBTurnOnBlock_8192E(PADAPTER Adapter);
void _InitBeaconParameters_8192E(PADAPTER Adapter);
void _InitBeaconMaxError_8192E(
PADAPTER Adapter,
BOOLEAN InfraMode
);
void SetBeaconRelatedRegisters8192E(PADAPTER padapter);
void hal_ReadRFType_8192E(PADAPTER Adapter);
/* RTL8192E-MAC Setting
***********************************************************/
u8 SetHwReg8192E(PADAPTER Adapter, u8 variable, u8 *val);
void GetHwReg8192E(PADAPTER Adapter, u8 variable, u8 *val);
u8
SetHalDefVar8192E(
PADAPTER Adapter,
HAL_DEF_VARIABLE eVariable,
void *pValue
);
u8
GetHalDefVar8192E(
PADAPTER Adapter,
HAL_DEF_VARIABLE eVariable,
void *pValue
);
void rtl8192e_set_hal_ops(struct hal_ops *pHalFunc);
void init_hal_spec_8192e(_adapter *adapter);
void rtl8192e_init_default_value(_adapter *padapter);
void rtl8192e_start_thread(_adapter *padapter);
void rtl8192e_stop_thread(_adapter *padapter);
#ifdef CONFIG_PCI_HCI
BOOLEAN InterruptRecognized8192EE(PADAPTER Adapter);
u16 get_txbd_rw_reg(u16 ff_hwaddr);
#endif
#ifdef CONFIG_SDIO_HCI
#ifdef CONFIG_SDIO_TX_ENABLE_AVAL_INT
void _init_available_page_threshold(PADAPTER padapter, u8 numHQ, u8 numNQ, u8 numLQ, u8 numPubQ);
#endif
#endif
#ifdef CONFIG_BT_COEXIST
void rtl8192e_combo_card_WifiOnlyHwInit(PADAPTER Adapter);
#endif
#endif /* __RTL8192E_HAL_H__ */
Reference in New Issue View Git Blame Copy Permalink