300 lines
7.1 KiB
C
Executable File
300 lines
7.1 KiB
C
Executable File
/**
|
|
NVT evb board file
|
|
To handle na51068 HW init.
|
|
@file na51068_hw_init.c
|
|
@ingroup
|
|
@note
|
|
Copyright Novatek Microelectronics Corp. 2016. All rights reserved.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License version 2 as
|
|
published by the Free Software Foundation.
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/nvt-common/nvt_common.h>
|
|
#include <asm/nvt-common/rcw_macro.h>
|
|
#include <asm/arch/IOAddress.h>
|
|
#include <asm/arch/raw_scanMP.h>
|
|
#include <linux/libfdt.h>
|
|
|
|
#define WDT_REG_ADDR(ofs) (IOADDR_WDT_REG_BASE+(ofs))
|
|
#define WDT_GETREG(ofs) INW(WDT_REG_ADDR(ofs))
|
|
#define WDT_SETREG(ofs,value) OUTW(WDT_REG_ADDR(ofs), (value))
|
|
|
|
#define CG_REG_ADDR(ofs) (IOADDR_CG_REG_BASE+(ofs))
|
|
#define CG_GETREG(ofs) INW(CG_REG_ADDR(ofs))
|
|
#define CG_SETREG(ofs,value) OUTW(CG_REG_ADDR(ofs), (value))
|
|
|
|
#define PAD_REG_ADDR(ofs) (IOADDR_PAD_REG_BASE+(ofs))
|
|
#define PAD_GETREG(ofs) INW(PAD_REG_ADDR(ofs))
|
|
#define PAD_SETREG(ofs,value) OUTW(PAD_REG_ADDR(ofs), (value))
|
|
|
|
#define TOP_REG_ADDR(ofs) (IOADDR_TOP_REG_BASE+(ofs))
|
|
#define TOP_GETREG(ofs) INW(TOP_REG_ADDR(ofs))
|
|
#define TOP_SETREG(ofs,value) OUTW(TOP_REG_ADDR(ofs), (value))
|
|
|
|
#define CG_PLL_ENABLE_OFS 0x0
|
|
#define CG_ENABLE_OFS 0x74
|
|
#define CG_RESET_OFS 0x84
|
|
#define CG_PLL4_DIV0_OFS 0x1318
|
|
#define CG_PLL4_DIV1_OFS 0x131C
|
|
#define CG_PLL4_DIV2_OFS 0x1320
|
|
#define WDT_POS (1 << 17)
|
|
|
|
#define WDT_CTRL_OFS 0x0
|
|
|
|
#if 0
|
|
#if defined(CONFIG_SD_CARD1_POWER_PIN) || defined(CONFIG_SD_CARD2_POWER_PIN) || defined(ETH_PHY_HW_RESET)
|
|
static void gpio_set_output(u32 pin)
|
|
{
|
|
u32 reg_data;
|
|
u32 ofs = (pin >> 5) << 2;
|
|
|
|
pin &= (32 - 1);
|
|
|
|
reg_data = INW(IOADDR_GPIO_REG_BASE + 0x20 + ofs);
|
|
reg_data |= (1 << pin); //output
|
|
OUTW(IOADDR_GPIO_REG_BASE + 0x20 + ofs, reg_data);
|
|
}
|
|
|
|
static void gpio_set_pin(u32 pin)
|
|
{
|
|
u32 tmp;
|
|
u32 ofs = (pin >> 5) << 2;
|
|
|
|
pin &= (32 - 1);
|
|
tmp = (1 << pin);
|
|
|
|
OUTW(IOADDR_GPIO_REG_BASE + 0x40 + ofs, tmp);
|
|
}
|
|
|
|
static void gpio_clear_pin(u32 pin)
|
|
{
|
|
u32 tmp;
|
|
u32 ofs = (pin >> 5) << 2;
|
|
|
|
pin &= (32 - 1);
|
|
tmp = (1 << pin);
|
|
|
|
OUTW(IOADDR_GPIO_REG_BASE + 0x60 + ofs, tmp);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
void nvt_ivot_reset_cpu(void)
|
|
{
|
|
u32 reg_value;
|
|
|
|
reg_value = CG_GETREG(CG_ENABLE_OFS);
|
|
CG_SETREG(CG_ENABLE_OFS, reg_value | WDT_POS);
|
|
|
|
reg_value = CG_GETREG(CG_RESET_OFS);
|
|
CG_SETREG(CG_RESET_OFS, reg_value | WDT_POS);
|
|
|
|
|
|
WDT_SETREG(WDT_CTRL_OFS, 0x5A960112);
|
|
|
|
udelay(80);
|
|
|
|
WDT_SETREG(WDT_CTRL_OFS, 0x5A960113);
|
|
}
|
|
|
|
|
|
#if 0
|
|
static void ethernet_init(void)
|
|
{
|
|
ulong fdt_addr = nvt_readl((ulong)nvt_shminfo_boot_fdt_addr);
|
|
int nodeoffset, len;
|
|
u32 *cell = NULL;
|
|
char path[20] = {0};
|
|
u32 sensor_cfg = 0x0, eth_cfg = 0x0, reg_val = 0x0;
|
|
|
|
sprintf(path,"/top@%x/sensor",IOADDR_TOP_REG_BASE);
|
|
|
|
nodeoffset = fdt_path_offset((const void*)fdt_addr, path);
|
|
if (nodeoffset < 0) {
|
|
printf("%s(%d) nodeoffset < 0\n",__func__, __LINE__);
|
|
return ;
|
|
}
|
|
|
|
cell = (u32*)fdt_getprop((const void*)fdt_addr, nodeoffset, "pinmux", &len);
|
|
if (len == 0) {
|
|
printf("%s(%d) len = 0\n",__func__, __LINE__);
|
|
return ;
|
|
}
|
|
|
|
sensor_cfg = __be32_to_cpu(cell[0]);
|
|
debug("%s(%d) sensor_cfg = 0x%x\n", __func__, __LINE__, sensor_cfg);
|
|
|
|
sprintf(path,"/eth@%x",IOADDR_ETH_REG_BASE);
|
|
|
|
nodeoffset = fdt_path_offset((const void*)fdt_addr, path);
|
|
if (nodeoffset < 0) {
|
|
printf("%s(%d) nodeoffset < 0\n", __func__, __LINE__);
|
|
return ;
|
|
}
|
|
|
|
cell = (u32*)fdt_getprop((const void*)fdt_addr, nodeoffset, "sp-clk", &len);
|
|
if (len == 0) {
|
|
printf("%s(%d) len = 0\n", __func__, __LINE__);
|
|
return ;
|
|
}
|
|
|
|
eth_cfg = __be32_to_cpu(cell[0]);
|
|
debug("%s(%d) eth_cfg = 0x%x\n", __func__, __LINE__, eth_cfg);
|
|
|
|
if ((sensor_cfg & 0x20000) || (eth_cfg == 1)) {
|
|
/* Disable PLL4 */
|
|
reg_val = CG_GETREG(CG_PLL_ENABLE_OFS);
|
|
reg_val &= ~(0x1 << 4);
|
|
CG_SETREG(CG_PLL_ENABLE_OFS, reg_val);
|
|
|
|
CG_SETREG(CG_PLL4_DIV0_OFS, 0x0);
|
|
CG_SETREG(CG_PLL4_DIV1_OFS, 0x0);
|
|
CG_SETREG(CG_PLL4_DIV2_OFS, 0x32);
|
|
|
|
/* spclk_sel: pll4 */
|
|
reg_val = CG_GETREG(0x24);
|
|
reg_val &= ~0x4300;
|
|
reg_val |= (0x1 << 8);
|
|
CG_SETREG(0x24, reg_val);
|
|
|
|
reg_val = CG_GETREG(0x3C);
|
|
reg_val &= ~0xFF000000;
|
|
reg_val |= (0xB << 24);
|
|
CG_SETREG(0x3C, reg_val);
|
|
|
|
/* Enable PLL4 */
|
|
reg_val = CG_GETREG(CG_PLL_ENABLE_OFS);
|
|
reg_val |= (0x1 << 4);
|
|
CG_SETREG(CG_PLL_ENABLE_OFS, reg_val);
|
|
|
|
/* Enable SP_CLK */
|
|
reg_val = CG_GETREG(0x70);
|
|
reg_val |= (0x1 << 12);
|
|
CG_SETREG(0x70, reg_val);
|
|
|
|
/* Pinmux SP_CLK1 */
|
|
reg_val = TOP_GETREG(0xC);
|
|
reg_val &= ~(0x3 << 18);
|
|
reg_val |= (0x1 << 18);
|
|
TOP_SETREG(0xC, reg_val);
|
|
|
|
/* Pinmux P_GPIO17 */
|
|
reg_val = TOP_GETREG(0xA8);
|
|
reg_val &= ~(0x1 << 17);
|
|
TOP_SETREG(0xA8, reg_val);
|
|
}
|
|
|
|
#ifdef ETH_PHY_HW_RESET
|
|
gpio_set_output(NVT_PHY_RST_PIN);
|
|
gpio_clear_pin(NVT_PHY_RST_PIN);
|
|
mdelay(20);
|
|
gpio_set_pin(NVT_PHY_RST_PIN);
|
|
mdelay(50);
|
|
#endif
|
|
}
|
|
|
|
static void sdio_power_cycle(void)
|
|
{
|
|
#if (CONFIG_SD_CARD1_POWER_PIN || CONFIG_SD_CARD2_POWER_PIN)
|
|
u32 reg_val;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SD_CARD1_POWER_PIN
|
|
gpio_set_output(CONFIG_SD_CARD1_POWER_PIN);
|
|
if (CONFIG_SD_CARD1_ON_STATE)
|
|
gpio_clear_pin(CONFIG_SD_CARD1_POWER_PIN);
|
|
else
|
|
gpio_set_pin(CONFIG_SD_CARD1_POWER_PIN);
|
|
|
|
reg_val = TOP_GETREG(0xA0);
|
|
reg_val |= 0x1F800;
|
|
TOP_SETREG(0xA0, reg_val);
|
|
|
|
reg_val = PAD_GETREG(0x0);
|
|
reg_val &= ~0xFFC00000;
|
|
reg_val |= 0x55400000;
|
|
PAD_SETREG(0x0, reg_val);
|
|
|
|
reg_val = PAD_GETREG(0x4);
|
|
reg_val &= ~0x3;
|
|
reg_val |= 0x1;
|
|
PAD_SETREG(0x4, reg_val);
|
|
|
|
gpio_set_output(C_GPIO(11));
|
|
gpio_set_output(C_GPIO(12));
|
|
gpio_set_output(C_GPIO(13));
|
|
gpio_set_output(C_GPIO(14));
|
|
gpio_set_output(C_GPIO(15));
|
|
gpio_set_output(C_GPIO(16));
|
|
gpio_clear_pin(C_GPIO(11));
|
|
gpio_clear_pin(C_GPIO(12));
|
|
gpio_clear_pin(C_GPIO(13));
|
|
gpio_clear_pin(C_GPIO(14));
|
|
gpio_clear_pin(C_GPIO(15));
|
|
gpio_clear_pin(C_GPIO(16));
|
|
#endif
|
|
|
|
#ifdef CONFIG_SD_CARD2_POWER_PIN
|
|
gpio_set_output(CONFIG_SD_CARD2_POWER_PIN);
|
|
if (CONFIG_SD_CARD2_ON_STATE)
|
|
gpio_clear_pin(CONFIG_SD_CARD2_POWER_PIN);
|
|
else
|
|
gpio_set_pin(CONFIG_SD_CARD2_POWER_PIN);
|
|
|
|
reg_val = TOP_GETREG(0xA0);
|
|
reg_val |= 0x7E0000;
|
|
TOP_SETREG(0xA0, reg_val);
|
|
|
|
reg_val = PAD_GETREG(0x4);
|
|
reg_val &= ~0x3FFC;
|
|
reg_val |= 0x1554;
|
|
PAD_SETREG(0x4, reg_val);
|
|
|
|
gpio_set_output(C_GPIO(17));
|
|
gpio_set_output(C_GPIO(18));
|
|
gpio_set_output(C_GPIO(19));
|
|
gpio_set_output(C_GPIO(20));
|
|
gpio_set_output(C_GPIO(21));
|
|
gpio_set_output(C_GPIO(22));
|
|
gpio_clear_pin(C_GPIO(17));
|
|
gpio_clear_pin(C_GPIO(18));
|
|
gpio_clear_pin(C_GPIO(19));
|
|
gpio_clear_pin(C_GPIO(20));
|
|
gpio_clear_pin(C_GPIO(21));
|
|
gpio_clear_pin(C_GPIO(22));
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
int nvt_ivot_hw_init(void)
|
|
{
|
|
//ethernet_init();
|
|
|
|
//sdio_power_cycle();
|
|
|
|
return 0;
|
|
}
|
|
|
|
typedef void (*LDR_GENERIC_CB)(void);
|
|
#define JUMP_ADDR 0xFE080000
|
|
|
|
void nvt_ddr_scan(void)
|
|
{
|
|
void (*image_entry)(void) = NULL;
|
|
printf("memcpy->[0x%08x]", (int)JUMP_ADDR);
|
|
memcpy((void *)JUMP_ADDR, ddr_scan, sizeof(ddr_scan));
|
|
printf("->done\n");
|
|
flush_dcache_range(JUMP_ADDR, JUMP_ADDR + sizeof(ddr_scan));
|
|
printf("flush->");
|
|
invalidate_dcache_range(JUMP_ADDR, JUMP_ADDR + roundup(sizeof(ddr_scan), ARCH_DMA_MINALIGN));
|
|
printf("done\r\n");
|
|
printf("Jump into sram\n");
|
|
image_entry = (LDR_GENERIC_CB)(*((unsigned long*)JUMP_ADDR));
|
|
image_entry();
|
|
}
|