1310 lines
		
	
	
		
			33 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1310 lines
		
	
	
		
			33 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * i740fb - framebuffer driver for Intel740
 | 
						|
 * Copyright (c) 2011 Ondrej Zary
 | 
						|
 *
 | 
						|
 * Based on old i740fb driver (c) 2001-2002 Andrey Ulanov <drey@rt.mipt.ru>
 | 
						|
 * which was partially based on:
 | 
						|
 *  VGA 16-color framebuffer driver (c) 1999 Ben Pfaff <pfaffben@debian.org>
 | 
						|
 *	and Petr Vandrovec <VANDROVE@vc.cvut.cz>
 | 
						|
 *  i740 driver from XFree86 (c) 1998-1999 Precision Insight, Inc., Cedar Park,
 | 
						|
 *	Texas.
 | 
						|
 *  i740fb by Patrick LERDA, v0.9
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/errno.h>
 | 
						|
#include <linux/string.h>
 | 
						|
#include <linux/mm.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/fb.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/pci.h>
 | 
						|
#include <linux/pci_ids.h>
 | 
						|
#include <linux/i2c.h>
 | 
						|
#include <linux/i2c-algo-bit.h>
 | 
						|
#include <linux/console.h>
 | 
						|
#include <video/vga.h>
 | 
						|
 | 
						|
#include "i740_reg.h"
 | 
						|
 | 
						|
static char *mode_option;
 | 
						|
static int mtrr = 1;
 | 
						|
 | 
						|
struct i740fb_par {
 | 
						|
	unsigned char __iomem *regs;
 | 
						|
	bool has_sgram;
 | 
						|
	int wc_cookie;
 | 
						|
	bool ddc_registered;
 | 
						|
	struct i2c_adapter ddc_adapter;
 | 
						|
	struct i2c_algo_bit_data ddc_algo;
 | 
						|
	u32 pseudo_palette[16];
 | 
						|
	struct mutex open_lock;
 | 
						|
	unsigned int ref_count;
 | 
						|
 | 
						|
	u8 crtc[VGA_CRT_C];
 | 
						|
	u8 atc[VGA_ATT_C];
 | 
						|
	u8 gdc[VGA_GFX_C];
 | 
						|
	u8 seq[VGA_SEQ_C];
 | 
						|
	u8 misc;
 | 
						|
	u8 vss;
 | 
						|
 | 
						|
	/* i740 specific registers */
 | 
						|
	u8 display_cntl;
 | 
						|
	u8 pixelpipe_cfg0;
 | 
						|
	u8 pixelpipe_cfg1;
 | 
						|
	u8 pixelpipe_cfg2;
 | 
						|
	u8 video_clk2_m;
 | 
						|
	u8 video_clk2_n;
 | 
						|
	u8 video_clk2_mn_msbs;
 | 
						|
	u8 video_clk2_div_sel;
 | 
						|
	u8 pll_cntl;
 | 
						|
	u8 address_mapping;
 | 
						|
	u8 io_cntl;
 | 
						|
	u8 bitblt_cntl;
 | 
						|
	u8 ext_vert_total;
 | 
						|
	u8 ext_vert_disp_end;
 | 
						|
	u8 ext_vert_sync_start;
 | 
						|
	u8 ext_vert_blank_start;
 | 
						|
	u8 ext_horiz_total;
 | 
						|
	u8 ext_horiz_blank;
 | 
						|
	u8 ext_offset;
 | 
						|
	u8 interlace_cntl;
 | 
						|
	u32 lmi_fifo_watermark;
 | 
						|
	u8 ext_start_addr;
 | 
						|
	u8 ext_start_addr_hi;
 | 
						|
};
 | 
						|
 | 
						|
#define DACSPEED8	203
 | 
						|
#define DACSPEED16	163
 | 
						|
#define DACSPEED24_SG	136
 | 
						|
#define DACSPEED24_SD	128
 | 
						|
#define DACSPEED32	86
 | 
						|
 | 
						|
static const struct fb_fix_screeninfo i740fb_fix = {
 | 
						|
	.id =		"i740fb",
 | 
						|
	.type =		FB_TYPE_PACKED_PIXELS,
 | 
						|
	.visual =	FB_VISUAL_TRUECOLOR,
 | 
						|
	.xpanstep =	8,
 | 
						|
	.ypanstep =	1,
 | 
						|
	.accel =	FB_ACCEL_NONE,
 | 
						|
};
 | 
						|
 | 
						|
static inline void i740outb(struct i740fb_par *par, u16 port, u8 val)
 | 
						|
{
 | 
						|
	vga_mm_w(par->regs, port, val);
 | 
						|
}
 | 
						|
static inline u8 i740inb(struct i740fb_par *par, u16 port)
 | 
						|
{
 | 
						|
	return vga_mm_r(par->regs, port);
 | 
						|
}
 | 
						|
static inline void i740outreg(struct i740fb_par *par, u16 port, u8 reg, u8 val)
 | 
						|
{
 | 
						|
	vga_mm_w_fast(par->regs, port, reg, val);
 | 
						|
}
 | 
						|
static inline u8 i740inreg(struct i740fb_par *par, u16 port, u8 reg)
 | 
						|
{
 | 
						|
	vga_mm_w(par->regs, port, reg);
 | 
						|
	return vga_mm_r(par->regs, port+1);
 | 
						|
}
 | 
						|
static inline void i740outreg_mask(struct i740fb_par *par, u16 port, u8 reg,
 | 
						|
				   u8 val, u8 mask)
 | 
						|
{
 | 
						|
	vga_mm_w_fast(par->regs, port, reg, (val & mask)
 | 
						|
		| (i740inreg(par, port, reg) & ~mask));
 | 
						|
}
 | 
						|
 | 
						|
#define REG_DDC_DRIVE	0x62
 | 
						|
#define REG_DDC_STATE	0x63
 | 
						|
#define DDC_SCL		(1 << 3)
 | 
						|
#define DDC_SDA		(1 << 2)
 | 
						|
 | 
						|
static void i740fb_ddc_setscl(void *data, int val)
 | 
						|
{
 | 
						|
	struct i740fb_par *par = data;
 | 
						|
 | 
						|
	i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SCL, DDC_SCL);
 | 
						|
	i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SCL : 0, DDC_SCL);
 | 
						|
}
 | 
						|
 | 
						|
static void i740fb_ddc_setsda(void *data, int val)
 | 
						|
{
 | 
						|
	struct i740fb_par *par = data;
 | 
						|
 | 
						|
	i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SDA, DDC_SDA);
 | 
						|
	i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SDA : 0, DDC_SDA);
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_ddc_getscl(void *data)
 | 
						|
{
 | 
						|
	struct i740fb_par *par = data;
 | 
						|
 | 
						|
	i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SCL);
 | 
						|
 | 
						|
	return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SCL);
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_ddc_getsda(void *data)
 | 
						|
{
 | 
						|
	struct i740fb_par *par = data;
 | 
						|
 | 
						|
	i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SDA);
 | 
						|
 | 
						|
	return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SDA);
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_setup_ddc_bus(struct fb_info *info)
 | 
						|
{
 | 
						|
	struct i740fb_par *par = info->par;
 | 
						|
 | 
						|
	strlcpy(par->ddc_adapter.name, info->fix.id,
 | 
						|
		sizeof(par->ddc_adapter.name));
 | 
						|
	par->ddc_adapter.owner		= THIS_MODULE;
 | 
						|
	par->ddc_adapter.class		= I2C_CLASS_DDC;
 | 
						|
	par->ddc_adapter.algo_data	= &par->ddc_algo;
 | 
						|
	par->ddc_adapter.dev.parent	= info->device;
 | 
						|
	par->ddc_algo.setsda		= i740fb_ddc_setsda;
 | 
						|
	par->ddc_algo.setscl		= i740fb_ddc_setscl;
 | 
						|
	par->ddc_algo.getsda		= i740fb_ddc_getsda;
 | 
						|
	par->ddc_algo.getscl		= i740fb_ddc_getscl;
 | 
						|
	par->ddc_algo.udelay		= 10;
 | 
						|
	par->ddc_algo.timeout		= 20;
 | 
						|
	par->ddc_algo.data		= par;
 | 
						|
 | 
						|
	i2c_set_adapdata(&par->ddc_adapter, par);
 | 
						|
 | 
						|
	return i2c_bit_add_bus(&par->ddc_adapter);
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_open(struct fb_info *info, int user)
 | 
						|
{
 | 
						|
	struct i740fb_par *par = info->par;
 | 
						|
 | 
						|
	mutex_lock(&(par->open_lock));
 | 
						|
	par->ref_count++;
 | 
						|
	mutex_unlock(&(par->open_lock));
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_release(struct fb_info *info, int user)
 | 
						|
{
 | 
						|
	struct i740fb_par *par = info->par;
 | 
						|
 | 
						|
	mutex_lock(&(par->open_lock));
 | 
						|
	if (par->ref_count == 0) {
 | 
						|
		fb_err(info, "release called with zero refcount\n");
 | 
						|
		mutex_unlock(&(par->open_lock));
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	par->ref_count--;
 | 
						|
	mutex_unlock(&(par->open_lock));
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static u32 i740_calc_fifo(struct i740fb_par *par, u32 freq, int bpp)
 | 
						|
{
 | 
						|
	/*
 | 
						|
	 * Would like to calculate these values automatically, but a generic
 | 
						|
	 * algorithm does not seem possible.  Note: These FIFO water mark
 | 
						|
	 * values were tested on several cards and seem to eliminate the
 | 
						|
	 * all of the snow and vertical banding, but fine adjustments will
 | 
						|
	 * probably be required for other cards.
 | 
						|
	 */
 | 
						|
 | 
						|
	u32 wm;
 | 
						|
 | 
						|
	switch (bpp) {
 | 
						|
	case 8:
 | 
						|
		if	(freq > 200)
 | 
						|
			wm = 0x18120000;
 | 
						|
		else if (freq > 175)
 | 
						|
			wm = 0x16110000;
 | 
						|
		else if (freq > 135)
 | 
						|
			wm = 0x120E0000;
 | 
						|
		else
 | 
						|
			wm = 0x100D0000;
 | 
						|
		break;
 | 
						|
	case 15:
 | 
						|
	case 16:
 | 
						|
		if (par->has_sgram) {
 | 
						|
			if	(freq > 140)
 | 
						|
				wm = 0x2C1D0000;
 | 
						|
			else if (freq > 120)
 | 
						|
				wm = 0x2C180000;
 | 
						|
			else if (freq > 100)
 | 
						|
				wm = 0x24160000;
 | 
						|
			else if (freq >  90)
 | 
						|
				wm = 0x18120000;
 | 
						|
			else if (freq >  50)
 | 
						|
				wm = 0x16110000;
 | 
						|
			else if (freq >  32)
 | 
						|
				wm = 0x13100000;
 | 
						|
			else
 | 
						|
				wm = 0x120E0000;
 | 
						|
		} else {
 | 
						|
			if	(freq > 160)
 | 
						|
				wm = 0x28200000;
 | 
						|
			else if (freq > 140)
 | 
						|
				wm = 0x2A1E0000;
 | 
						|
			else if (freq > 130)
 | 
						|
				wm = 0x2B1A0000;
 | 
						|
			else if (freq > 120)
 | 
						|
				wm = 0x2C180000;
 | 
						|
			else if (freq > 100)
 | 
						|
				wm = 0x24180000;
 | 
						|
			else if (freq >  90)
 | 
						|
				wm = 0x18120000;
 | 
						|
			else if (freq >  50)
 | 
						|
				wm = 0x16110000;
 | 
						|
			else if (freq >  32)
 | 
						|
				wm = 0x13100000;
 | 
						|
			else
 | 
						|
				wm = 0x120E0000;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case 24:
 | 
						|
		if (par->has_sgram) {
 | 
						|
			if	(freq > 130)
 | 
						|
				wm = 0x31200000;
 | 
						|
			else if (freq > 120)
 | 
						|
				wm = 0x2E200000;
 | 
						|
			else if (freq > 100)
 | 
						|
				wm = 0x2C1D0000;
 | 
						|
			else if (freq >  80)
 | 
						|
				wm = 0x25180000;
 | 
						|
			else if (freq >  64)
 | 
						|
				wm = 0x24160000;
 | 
						|
			else if (freq >  49)
 | 
						|
				wm = 0x18120000;
 | 
						|
			else if (freq >  32)
 | 
						|
				wm = 0x16110000;
 | 
						|
			else
 | 
						|
				wm = 0x13100000;
 | 
						|
		} else {
 | 
						|
			if	(freq > 120)
 | 
						|
				wm = 0x311F0000;
 | 
						|
			else if (freq > 100)
 | 
						|
				wm = 0x2C1D0000;
 | 
						|
			else if (freq >  80)
 | 
						|
				wm = 0x25180000;
 | 
						|
			else if (freq >  64)
 | 
						|
				wm = 0x24160000;
 | 
						|
			else if (freq >  49)
 | 
						|
				wm = 0x18120000;
 | 
						|
			else if (freq >  32)
 | 
						|
				wm = 0x16110000;
 | 
						|
			else
 | 
						|
				wm = 0x13100000;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case 32:
 | 
						|
		if (par->has_sgram) {
 | 
						|
			if	(freq >  80)
 | 
						|
				wm = 0x2A200000;
 | 
						|
			else if (freq >  60)
 | 
						|
				wm = 0x281A0000;
 | 
						|
			else if (freq >  49)
 | 
						|
				wm = 0x25180000;
 | 
						|
			else if (freq >  32)
 | 
						|
				wm = 0x18120000;
 | 
						|
			else
 | 
						|
				wm = 0x16110000;
 | 
						|
		} else {
 | 
						|
			if	(freq >  80)
 | 
						|
				wm = 0x29200000;
 | 
						|
			else if (freq >  60)
 | 
						|
				wm = 0x281A0000;
 | 
						|
			else if (freq >  49)
 | 
						|
				wm = 0x25180000;
 | 
						|
			else if (freq >  32)
 | 
						|
				wm = 0x18120000;
 | 
						|
			else
 | 
						|
				wm = 0x16110000;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	return wm;
 | 
						|
}
 | 
						|
 | 
						|
/* clock calculation from i740fb by Patrick LERDA */
 | 
						|
 | 
						|
#define I740_RFREQ		1000000
 | 
						|
#define TARGET_MAX_N		30
 | 
						|
#define I740_FFIX		(1 << 8)
 | 
						|
#define I740_RFREQ_FIX		(I740_RFREQ / I740_FFIX)
 | 
						|
#define I740_REF_FREQ		(6667 * I740_FFIX / 100)	/* 66.67 MHz */
 | 
						|
#define I740_MAX_VCO_FREQ	(450 * I740_FFIX)		/* 450 MHz */
 | 
						|
 | 
						|
static void i740_calc_vclk(u32 freq, struct i740fb_par *par)
 | 
						|
{
 | 
						|
	const u32 err_max    = freq / (200  * I740_RFREQ / I740_FFIX);
 | 
						|
	const u32 err_target = freq / (1000 * I740_RFREQ / I740_FFIX);
 | 
						|
	u32 err_best = 512 * I740_FFIX;
 | 
						|
	u32 f_err, f_vco;
 | 
						|
	int m_best = 0, n_best = 0, p_best = 0;
 | 
						|
	int m, n;
 | 
						|
 | 
						|
	p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX)));
 | 
						|
	f_vco = (freq * (1 << p_best)) / I740_RFREQ_FIX;
 | 
						|
	freq = freq / I740_RFREQ_FIX;
 | 
						|
 | 
						|
	n = 2;
 | 
						|
	do {
 | 
						|
		n++;
 | 
						|
		m = ((f_vco * n) / I740_REF_FREQ + 2) / 4;
 | 
						|
 | 
						|
		if (m < 3)
 | 
						|
			m = 3;
 | 
						|
 | 
						|
		{
 | 
						|
			u32 f_out = (((m * I740_REF_FREQ * 4)
 | 
						|
				 / n) + ((1 << p_best) / 2)) / (1 << p_best);
 | 
						|
 | 
						|
			f_err = (freq - f_out);
 | 
						|
 | 
						|
			if (abs(f_err) < err_max) {
 | 
						|
				m_best = m;
 | 
						|
				n_best = n;
 | 
						|
				err_best = f_err;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	} while ((abs(f_err) >= err_target) &&
 | 
						|
		 ((n <= TARGET_MAX_N) || (abs(err_best) > err_max)));
 | 
						|
 | 
						|
	if (abs(f_err) < err_target) {
 | 
						|
		m_best = m;
 | 
						|
		n_best = n;
 | 
						|
	}
 | 
						|
 | 
						|
	par->video_clk2_m = (m_best - 2) & 0xFF;
 | 
						|
	par->video_clk2_n = (n_best - 2) & 0xFF;
 | 
						|
	par->video_clk2_mn_msbs = ((((n_best - 2) >> 4) & VCO_N_MSBS)
 | 
						|
				 | (((m_best - 2) >> 8) & VCO_M_MSBS));
 | 
						|
	par->video_clk2_div_sel = ((p_best << 4) | REF_DIV_1);
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_decode_var(const struct fb_var_screeninfo *var,
 | 
						|
			     struct i740fb_par *par, struct fb_info *info)
 | 
						|
{
 | 
						|
	/*
 | 
						|
	 * Get the video params out of 'var'.
 | 
						|
	 * If a value doesn't fit, round it up, if it's too big, return -EINVAL.
 | 
						|
	 */
 | 
						|
 | 
						|
	u32 xres, right, hslen, left, xtotal;
 | 
						|
	u32 yres, lower, vslen, upper, ytotal;
 | 
						|
	u32 vxres, xoffset, vyres, yoffset;
 | 
						|
	u32 bpp, base, dacspeed24, mem;
 | 
						|
	u8 r7;
 | 
						|
	int i;
 | 
						|
 | 
						|
	dev_dbg(info->device, "decode_var: xres: %i, yres: %i, xres_v: %i, xres_v: %i\n",
 | 
						|
		  var->xres, var->yres, var->xres_virtual, var->xres_virtual);
 | 
						|
	dev_dbg(info->device, "	xoff: %i, yoff: %i, bpp: %i, graysc: %i\n",
 | 
						|
		  var->xoffset, var->yoffset, var->bits_per_pixel,
 | 
						|
		  var->grayscale);
 | 
						|
	dev_dbg(info->device, "	activate: %i, nonstd: %i, vmode: %i\n",
 | 
						|
		  var->activate, var->nonstd, var->vmode);
 | 
						|
	dev_dbg(info->device, "	pixclock: %i, hsynclen:%i, vsynclen:%i\n",
 | 
						|
		  var->pixclock, var->hsync_len, var->vsync_len);
 | 
						|
	dev_dbg(info->device, "	left: %i, right: %i, up:%i, lower:%i\n",
 | 
						|
		  var->left_margin, var->right_margin, var->upper_margin,
 | 
						|
		  var->lower_margin);
 | 
						|
 | 
						|
 | 
						|
	bpp = var->bits_per_pixel;
 | 
						|
	switch (bpp) {
 | 
						|
	case 1 ... 8:
 | 
						|
		bpp = 8;
 | 
						|
		if ((1000000 / var->pixclock) > DACSPEED8) {
 | 
						|
			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 8bpp)\n",
 | 
						|
				1000000 / var->pixclock, DACSPEED8);
 | 
						|
			return -EINVAL;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case 9 ... 15:
 | 
						|
		bpp = 15;
 | 
						|
		/* fall through */
 | 
						|
	case 16:
 | 
						|
		if ((1000000 / var->pixclock) > DACSPEED16) {
 | 
						|
			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 15/16bpp)\n",
 | 
						|
				1000000 / var->pixclock, DACSPEED16);
 | 
						|
			return -EINVAL;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case 17 ... 24:
 | 
						|
		bpp = 24;
 | 
						|
		dacspeed24 = par->has_sgram ? DACSPEED24_SG : DACSPEED24_SD;
 | 
						|
		if ((1000000 / var->pixclock) > dacspeed24) {
 | 
						|
			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 24bpp)\n",
 | 
						|
				1000000 / var->pixclock, dacspeed24);
 | 
						|
			return -EINVAL;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case 25 ... 32:
 | 
						|
		bpp = 32;
 | 
						|
		if ((1000000 / var->pixclock) > DACSPEED32) {
 | 
						|
			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 32bpp)\n",
 | 
						|
				1000000 / var->pixclock, DACSPEED32);
 | 
						|
			return -EINVAL;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	xres = ALIGN(var->xres, 8);
 | 
						|
	vxres = ALIGN(var->xres_virtual, 16);
 | 
						|
	if (vxres < xres)
 | 
						|
		vxres = xres;
 | 
						|
 | 
						|
	xoffset = ALIGN(var->xoffset, 8);
 | 
						|
	if (xres + xoffset > vxres)
 | 
						|
		xoffset = vxres - xres;
 | 
						|
 | 
						|
	left = ALIGN(var->left_margin, 8);
 | 
						|
	right = ALIGN(var->right_margin, 8);
 | 
						|
	hslen = ALIGN(var->hsync_len, 8);
 | 
						|
 | 
						|
	yres = var->yres;
 | 
						|
	vyres = var->yres_virtual;
 | 
						|
	if (yres > vyres)
 | 
						|
		vyres = yres;
 | 
						|
 | 
						|
	yoffset = var->yoffset;
 | 
						|
	if (yres + yoffset > vyres)
 | 
						|
		yoffset = vyres - yres;
 | 
						|
 | 
						|
	lower = var->lower_margin;
 | 
						|
	vslen = var->vsync_len;
 | 
						|
	upper = var->upper_margin;
 | 
						|
 | 
						|
	mem = vxres * vyres * ((bpp + 1) / 8);
 | 
						|
	if (mem > info->screen_size) {
 | 
						|
		dev_err(info->device, "not enough video memory (%d KB requested, %ld KB available)\n",
 | 
						|
			mem >> 10, info->screen_size >> 10);
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	if (yoffset + yres > vyres)
 | 
						|
		yoffset = vyres - yres;
 | 
						|
 | 
						|
	xtotal = xres + right + hslen + left;
 | 
						|
	ytotal = yres + lower + vslen + upper;
 | 
						|
 | 
						|
	par->crtc[VGA_CRTC_H_TOTAL] = (xtotal >> 3) - 5;
 | 
						|
	par->crtc[VGA_CRTC_H_DISP] = (xres >> 3) - 1;
 | 
						|
	par->crtc[VGA_CRTC_H_BLANK_START] = ((xres + right) >> 3) - 1;
 | 
						|
	par->crtc[VGA_CRTC_H_SYNC_START] = (xres + right) >> 3;
 | 
						|
	par->crtc[VGA_CRTC_H_SYNC_END] = (((xres + right + hslen) >> 3) & 0x1F)
 | 
						|
		| ((((xres + right + hslen) >> 3) & 0x20) << 2);
 | 
						|
	par->crtc[VGA_CRTC_H_BLANK_END] = ((xres + right + hslen) >> 3 & 0x1F)
 | 
						|
		| 0x80;
 | 
						|
 | 
						|
	par->crtc[VGA_CRTC_V_TOTAL] = ytotal - 2;
 | 
						|
 | 
						|
	r7 = 0x10;	/* disable linecompare */
 | 
						|
	if (ytotal & 0x100)
 | 
						|
		r7 |= 0x01;
 | 
						|
	if (ytotal & 0x200)
 | 
						|
		r7 |= 0x20;
 | 
						|
 | 
						|
	par->crtc[VGA_CRTC_PRESET_ROW] = 0;
 | 
						|
	par->crtc[VGA_CRTC_MAX_SCAN] = 0x40;	/* 1 scanline, no linecmp */
 | 
						|
	if (var->vmode & FB_VMODE_DOUBLE)
 | 
						|
		par->crtc[VGA_CRTC_MAX_SCAN] |= 0x80;
 | 
						|
	par->crtc[VGA_CRTC_CURSOR_START] = 0x00;
 | 
						|
	par->crtc[VGA_CRTC_CURSOR_END] = 0x00;
 | 
						|
	par->crtc[VGA_CRTC_CURSOR_HI] = 0x00;
 | 
						|
	par->crtc[VGA_CRTC_CURSOR_LO] = 0x00;
 | 
						|
	par->crtc[VGA_CRTC_V_DISP_END] = yres-1;
 | 
						|
	if ((yres-1) & 0x100)
 | 
						|
		r7 |= 0x02;
 | 
						|
	if ((yres-1) & 0x200)
 | 
						|
		r7 |= 0x40;
 | 
						|
 | 
						|
	par->crtc[VGA_CRTC_V_BLANK_START] = yres + lower - 1;
 | 
						|
	par->crtc[VGA_CRTC_V_SYNC_START] = yres + lower - 1;
 | 
						|
	if ((yres + lower - 1) & 0x100)
 | 
						|
		r7 |= 0x0C;
 | 
						|
	if ((yres + lower - 1) & 0x200) {
 | 
						|
		par->crtc[VGA_CRTC_MAX_SCAN] |= 0x20;
 | 
						|
		r7 |= 0x80;
 | 
						|
	}
 | 
						|
 | 
						|
	/* disabled IRQ */
 | 
						|
	par->crtc[VGA_CRTC_V_SYNC_END] =
 | 
						|
		((yres + lower - 1 + vslen) & 0x0F) & ~0x10;
 | 
						|
	/* 0x7F for VGA, but some SVGA chips require all 8 bits to be set */
 | 
						|
	par->crtc[VGA_CRTC_V_BLANK_END] = (yres + lower - 1 + vslen) & 0xFF;
 | 
						|
 | 
						|
	par->crtc[VGA_CRTC_UNDERLINE] = 0x00;
 | 
						|
	par->crtc[VGA_CRTC_MODE] = 0xC3 ;
 | 
						|
	par->crtc[VGA_CRTC_LINE_COMPARE] = 0xFF;
 | 
						|
	par->crtc[VGA_CRTC_OVERFLOW] = r7;
 | 
						|
 | 
						|
	par->vss = 0x00;	/* 3DA */
 | 
						|
 | 
						|
	for (i = 0x00; i < 0x10; i++)
 | 
						|
		par->atc[i] = i;
 | 
						|
	par->atc[VGA_ATC_MODE] = 0x81;
 | 
						|
	par->atc[VGA_ATC_OVERSCAN] = 0x00;	/* 0 for EGA, 0xFF for VGA */
 | 
						|
	par->atc[VGA_ATC_PLANE_ENABLE] = 0x0F;
 | 
						|
	par->atc[VGA_ATC_COLOR_PAGE] = 0x00;
 | 
						|
 | 
						|
	par->misc = 0xC3;
 | 
						|
	if (var->sync & FB_SYNC_HOR_HIGH_ACT)
 | 
						|
		par->misc &= ~0x40;
 | 
						|
	if (var->sync & FB_SYNC_VERT_HIGH_ACT)
 | 
						|
		par->misc &= ~0x80;
 | 
						|
 | 
						|
	par->seq[VGA_SEQ_CLOCK_MODE] = 0x01;
 | 
						|
	par->seq[VGA_SEQ_PLANE_WRITE] = 0x0F;
 | 
						|
	par->seq[VGA_SEQ_CHARACTER_MAP] = 0x00;
 | 
						|
	par->seq[VGA_SEQ_MEMORY_MODE] = 0x06;
 | 
						|
 | 
						|
	par->gdc[VGA_GFX_SR_VALUE] = 0x00;
 | 
						|
	par->gdc[VGA_GFX_SR_ENABLE] = 0x00;
 | 
						|
	par->gdc[VGA_GFX_COMPARE_VALUE] = 0x00;
 | 
						|
	par->gdc[VGA_GFX_DATA_ROTATE] = 0x00;
 | 
						|
	par->gdc[VGA_GFX_PLANE_READ] = 0;
 | 
						|
	par->gdc[VGA_GFX_MODE] = 0x02;
 | 
						|
	par->gdc[VGA_GFX_MISC] = 0x05;
 | 
						|
	par->gdc[VGA_GFX_COMPARE_MASK] = 0x0F;
 | 
						|
	par->gdc[VGA_GFX_BIT_MASK] = 0xFF;
 | 
						|
 | 
						|
	base = (yoffset * vxres + (xoffset & ~7)) >> 2;
 | 
						|
	switch (bpp) {
 | 
						|
	case 8:
 | 
						|
		par->crtc[VGA_CRTC_OFFSET] = vxres >> 3;
 | 
						|
		par->ext_offset = vxres >> 11;
 | 
						|
		par->pixelpipe_cfg1 = DISPLAY_8BPP_MODE;
 | 
						|
		par->bitblt_cntl = COLEXP_8BPP;
 | 
						|
		break;
 | 
						|
	case 15: /* 0rrrrrgg gggbbbbb */
 | 
						|
	case 16: /* rrrrrggg gggbbbbb */
 | 
						|
		par->pixelpipe_cfg1 = (var->green.length == 6) ?
 | 
						|
			DISPLAY_16BPP_MODE : DISPLAY_15BPP_MODE;
 | 
						|
		par->crtc[VGA_CRTC_OFFSET] = vxres >> 2;
 | 
						|
		par->ext_offset = vxres >> 10;
 | 
						|
		par->bitblt_cntl = COLEXP_16BPP;
 | 
						|
		base *= 2;
 | 
						|
		break;
 | 
						|
	case 24:
 | 
						|
		par->crtc[VGA_CRTC_OFFSET] = (vxres * 3) >> 3;
 | 
						|
		par->ext_offset = (vxres * 3) >> 11;
 | 
						|
		par->pixelpipe_cfg1 = DISPLAY_24BPP_MODE;
 | 
						|
		par->bitblt_cntl = COLEXP_24BPP;
 | 
						|
		base &= 0xFFFFFFFE; /* ...ignore the last bit. */
 | 
						|
		base *= 3;
 | 
						|
		break;
 | 
						|
	case 32:
 | 
						|
		par->crtc[VGA_CRTC_OFFSET] = vxres >> 1;
 | 
						|
		par->ext_offset = vxres >> 9;
 | 
						|
		par->pixelpipe_cfg1 = DISPLAY_32BPP_MODE;
 | 
						|
		par->bitblt_cntl = COLEXP_RESERVED; /* Unimplemented on i740 */
 | 
						|
		base *= 4;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF;
 | 
						|
	par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >>  8;
 | 
						|
	par->ext_start_addr =
 | 
						|
		((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE;
 | 
						|
	par->ext_start_addr_hi = (base & 0x3FC00000) >> 22;
 | 
						|
 | 
						|
	par->pixelpipe_cfg0 = DAC_8_BIT;
 | 
						|
 | 
						|
	par->pixelpipe_cfg2 = DISPLAY_GAMMA_ENABLE | OVERLAY_GAMMA_ENABLE;
 | 
						|
	par->io_cntl = EXTENDED_CRTC_CNTL;
 | 
						|
	par->address_mapping = LINEAR_MODE_ENABLE | PAGE_MAPPING_ENABLE;
 | 
						|
	par->display_cntl = HIRES_MODE;
 | 
						|
 | 
						|
	/* Set the MCLK freq */
 | 
						|
	par->pll_cntl = PLL_MEMCLK_100000KHZ; /* 100 MHz -- use as default */
 | 
						|
 | 
						|
	/* Calculate the extended CRTC regs */
 | 
						|
	par->ext_vert_total = (ytotal - 2) >> 8;
 | 
						|
	par->ext_vert_disp_end = (yres - 1) >> 8;
 | 
						|
	par->ext_vert_sync_start = (yres + lower) >> 8;
 | 
						|
	par->ext_vert_blank_start = (yres + lower) >> 8;
 | 
						|
	par->ext_horiz_total = ((xtotal >> 3) - 5) >> 8;
 | 
						|
	par->ext_horiz_blank = (((xres + right) >> 3) & 0x40) >> 6;
 | 
						|
 | 
						|
	par->interlace_cntl = INTERLACE_DISABLE;
 | 
						|
 | 
						|
	/* Set the overscan color to 0. (NOTE: This only affects >8bpp mode) */
 | 
						|
	par->atc[VGA_ATC_OVERSCAN] = 0;
 | 
						|
 | 
						|
	/* Calculate VCLK that most closely matches the requested dot clock */
 | 
						|
	i740_calc_vclk((((u32)1e9) / var->pixclock) * (u32)(1e3), par);
 | 
						|
 | 
						|
	/* Since we program the clocks ourselves, always use VCLK2. */
 | 
						|
	par->misc |= 0x0C;
 | 
						|
 | 
						|
	/* Calculate the FIFO Watermark and Burst Length. */
 | 
						|
	par->lmi_fifo_watermark =
 | 
						|
		i740_calc_fifo(par, 1000000 / var->pixclock, bpp);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 | 
						|
{
 | 
						|
	switch (var->bits_per_pixel) {
 | 
						|
	case 8:
 | 
						|
		var->red.offset	= var->green.offset = var->blue.offset = 0;
 | 
						|
		var->red.length	= var->green.length = var->blue.length = 8;
 | 
						|
		break;
 | 
						|
	case 16:
 | 
						|
		switch (var->green.length) {
 | 
						|
		default:
 | 
						|
		case 5:
 | 
						|
			var->red.offset = 10;
 | 
						|
			var->green.offset = 5;
 | 
						|
			var->blue.offset = 0;
 | 
						|
			var->red.length	= 5;
 | 
						|
			var->green.length = 5;
 | 
						|
			var->blue.length = 5;
 | 
						|
			break;
 | 
						|
		case 6:
 | 
						|
			var->red.offset = 11;
 | 
						|
			var->green.offset = 5;
 | 
						|
			var->blue.offset = 0;
 | 
						|
			var->red.length = var->blue.length = 5;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case 24:
 | 
						|
		var->red.offset = 16;
 | 
						|
		var->green.offset = 8;
 | 
						|
		var->blue.offset = 0;
 | 
						|
		var->red.length	= var->green.length = var->blue.length = 8;
 | 
						|
		break;
 | 
						|
	case 32:
 | 
						|
		var->transp.offset = 24;
 | 
						|
		var->red.offset = 16;
 | 
						|
		var->green.offset = 8;
 | 
						|
		var->blue.offset = 0;
 | 
						|
		var->transp.length = 8;
 | 
						|
		var->red.length = var->green.length = var->blue.length = 8;
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	if (var->xres > var->xres_virtual)
 | 
						|
		var->xres_virtual = var->xres;
 | 
						|
 | 
						|
	if (var->yres > var->yres_virtual)
 | 
						|
		var->yres_virtual = var->yres;
 | 
						|
 | 
						|
	if (info->monspecs.hfmax && info->monspecs.vfmax &&
 | 
						|
	    info->monspecs.dclkmax && fb_validate_mode(var, info) < 0)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void vga_protect(struct i740fb_par *par)
 | 
						|
{
 | 
						|
	/* disable the display */
 | 
						|
	i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20);
 | 
						|
 | 
						|
	i740inb(par, 0x3DA);
 | 
						|
	i740outb(par, VGA_ATT_W, 0x00);	/* enable palette access */
 | 
						|
}
 | 
						|
 | 
						|
static void vga_unprotect(struct i740fb_par *par)
 | 
						|
{
 | 
						|
	/* reenable display */
 | 
						|
	i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20);
 | 
						|
 | 
						|
	i740inb(par, 0x3DA);
 | 
						|
	i740outb(par, VGA_ATT_W, 0x20);	/* disable palette access */
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_set_par(struct fb_info *info)
 | 
						|
{
 | 
						|
	struct i740fb_par *par = info->par;
 | 
						|
	u32 itemp;
 | 
						|
	int i;
 | 
						|
 | 
						|
	i = i740fb_decode_var(&info->var, par, info);
 | 
						|
	if (i)
 | 
						|
		return i;
 | 
						|
 | 
						|
	memset(info->screen_base, 0, info->screen_size);
 | 
						|
 | 
						|
	vga_protect(par);
 | 
						|
 | 
						|
	i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_DISABLE);
 | 
						|
 | 
						|
	mdelay(1);
 | 
						|
 | 
						|
	i740outreg(par, XRX, VCLK2_VCO_M, par->video_clk2_m);
 | 
						|
	i740outreg(par, XRX, VCLK2_VCO_N, par->video_clk2_n);
 | 
						|
	i740outreg(par, XRX, VCLK2_VCO_MN_MSBS, par->video_clk2_mn_msbs);
 | 
						|
	i740outreg(par, XRX, VCLK2_VCO_DIV_SEL, par->video_clk2_div_sel);
 | 
						|
 | 
						|
	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0,
 | 
						|
			par->pixelpipe_cfg0 & DAC_8_BIT, 0x80);
 | 
						|
 | 
						|
	i740inb(par, 0x3DA);
 | 
						|
	i740outb(par, 0x3C0, 0x00);
 | 
						|
 | 
						|
	/* update misc output register */
 | 
						|
	i740outb(par, VGA_MIS_W, par->misc | 0x01);
 | 
						|
 | 
						|
	/* synchronous reset on */
 | 
						|
	i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x01);
 | 
						|
	/* write sequencer registers */
 | 
						|
	i740outreg(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE,
 | 
						|
			par->seq[VGA_SEQ_CLOCK_MODE] | 0x20);
 | 
						|
	for (i = 2; i < VGA_SEQ_C; i++)
 | 
						|
		i740outreg(par, VGA_SEQ_I, i, par->seq[i]);
 | 
						|
 | 
						|
	/* synchronous reset off */
 | 
						|
	i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x03);
 | 
						|
 | 
						|
	/* deprotect CRT registers 0-7 */
 | 
						|
	i740outreg(par, VGA_CRT_IC, VGA_CRTC_V_SYNC_END,
 | 
						|
			par->crtc[VGA_CRTC_V_SYNC_END]);
 | 
						|
 | 
						|
	/* write CRT registers */
 | 
						|
	for (i = 0; i < VGA_CRT_C; i++)
 | 
						|
		i740outreg(par, VGA_CRT_IC, i, par->crtc[i]);
 | 
						|
 | 
						|
	/* write graphics controller registers */
 | 
						|
	for (i = 0; i < VGA_GFX_C; i++)
 | 
						|
		i740outreg(par, VGA_GFX_I, i, par->gdc[i]);
 | 
						|
 | 
						|
	/* write attribute controller registers */
 | 
						|
	for (i = 0; i < VGA_ATT_C; i++) {
 | 
						|
		i740inb(par, VGA_IS1_RC);		/* reset flip-flop */
 | 
						|
		i740outb(par, VGA_ATT_IW, i);
 | 
						|
		i740outb(par, VGA_ATT_IW, par->atc[i]);
 | 
						|
	}
 | 
						|
 | 
						|
	i740inb(par, VGA_IS1_RC);
 | 
						|
	i740outb(par, VGA_ATT_IW, 0x20);
 | 
						|
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_VERT_TOTAL, par->ext_vert_total);
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_VERT_DISPLAY, par->ext_vert_disp_end);
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_VERT_SYNC_START,
 | 
						|
			par->ext_vert_sync_start);
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_VERT_BLANK_START,
 | 
						|
			par->ext_vert_blank_start);
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_HORIZ_TOTAL, par->ext_horiz_total);
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_HORIZ_BLANK, par->ext_horiz_blank);
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_OFFSET, par->ext_offset);
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, par->ext_start_addr_hi);
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, par->ext_start_addr);
 | 
						|
 | 
						|
	i740outreg_mask(par, VGA_CRT_IC, INTERLACE_CNTL,
 | 
						|
			par->interlace_cntl, INTERLACE_ENABLE);
 | 
						|
	i740outreg_mask(par, XRX, ADDRESS_MAPPING, par->address_mapping, 0x1F);
 | 
						|
	i740outreg_mask(par, XRX, BITBLT_CNTL, par->bitblt_cntl, COLEXP_MODE);
 | 
						|
	i740outreg_mask(par, XRX, DISPLAY_CNTL,
 | 
						|
			par->display_cntl, VGA_WRAP_MODE | GUI_MODE);
 | 
						|
	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, par->pixelpipe_cfg0, 0x9B);
 | 
						|
	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_2, par->pixelpipe_cfg2, 0x0C);
 | 
						|
 | 
						|
	i740outreg(par, XRX, PLL_CNTL, par->pll_cntl);
 | 
						|
 | 
						|
	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_1,
 | 
						|
			par->pixelpipe_cfg1, DISPLAY_COLOR_MODE);
 | 
						|
 | 
						|
	itemp = readl(par->regs + FWATER_BLC);
 | 
						|
	itemp &= ~(LMI_BURST_LENGTH | LMI_FIFO_WATERMARK);
 | 
						|
	itemp |= par->lmi_fifo_watermark;
 | 
						|
	writel(itemp, par->regs + FWATER_BLC);
 | 
						|
 | 
						|
	i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_60HZ);
 | 
						|
 | 
						|
	i740outreg_mask(par, MRX, COL_KEY_CNTL_1, 0, BLANK_DISP_OVERLAY);
 | 
						|
	i740outreg_mask(par, XRX, IO_CTNL,
 | 
						|
			par->io_cntl, EXTENDED_ATTR_CNTL | EXTENDED_CRTC_CNTL);
 | 
						|
 | 
						|
	if (par->pixelpipe_cfg1 != DISPLAY_8BPP_MODE) {
 | 
						|
		i740outb(par, VGA_PEL_MSK, 0xFF);
 | 
						|
		i740outb(par, VGA_PEL_IW, 0x00);
 | 
						|
		for (i = 0; i < 256; i++) {
 | 
						|
			itemp = (par->pixelpipe_cfg0 & DAC_8_BIT) ? i : i >> 2;
 | 
						|
			i740outb(par, VGA_PEL_D, itemp);
 | 
						|
			i740outb(par, VGA_PEL_D, itemp);
 | 
						|
			i740outb(par, VGA_PEL_D, itemp);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Wait for screen to stabilize. */
 | 
						|
	mdelay(50);
 | 
						|
	vga_unprotect(par);
 | 
						|
 | 
						|
	info->fix.line_length =
 | 
						|
			info->var.xres_virtual * info->var.bits_per_pixel / 8;
 | 
						|
	if (info->var.bits_per_pixel == 8)
 | 
						|
		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 | 
						|
	else
 | 
						|
		info->fix.visual = FB_VISUAL_TRUECOLOR;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 | 
						|
			   unsigned blue, unsigned transp,
 | 
						|
			   struct fb_info *info)
 | 
						|
{
 | 
						|
	u32 r, g, b;
 | 
						|
 | 
						|
	dev_dbg(info->device, "setcolreg: regno: %i, red=%d, green=%d, blue=%d, transp=%d, bpp=%d\n",
 | 
						|
		regno, red, green, blue, transp, info->var.bits_per_pixel);
 | 
						|
 | 
						|
	switch (info->fix.visual) {
 | 
						|
	case FB_VISUAL_PSEUDOCOLOR:
 | 
						|
		if (regno >= 256)
 | 
						|
			return -EINVAL;
 | 
						|
		i740outb(info->par, VGA_PEL_IW, regno);
 | 
						|
		i740outb(info->par, VGA_PEL_D, red >> 8);
 | 
						|
		i740outb(info->par, VGA_PEL_D, green >> 8);
 | 
						|
		i740outb(info->par, VGA_PEL_D, blue >> 8);
 | 
						|
		break;
 | 
						|
	case FB_VISUAL_TRUECOLOR:
 | 
						|
		if (regno >= 16)
 | 
						|
			return -EINVAL;
 | 
						|
		r = (red >> (16 - info->var.red.length))
 | 
						|
			<< info->var.red.offset;
 | 
						|
		b = (blue >> (16 - info->var.blue.length))
 | 
						|
			<< info->var.blue.offset;
 | 
						|
		g = (green >> (16 - info->var.green.length))
 | 
						|
			<< info->var.green.offset;
 | 
						|
		((u32 *) info->pseudo_palette)[regno] = r | g | b;
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_pan_display(struct fb_var_screeninfo *var,
 | 
						|
				 struct fb_info *info)
 | 
						|
{
 | 
						|
	struct i740fb_par *par = info->par;
 | 
						|
	u32 base = (var->yoffset * info->var.xres_virtual
 | 
						|
		 + (var->xoffset & ~7)) >> 2;
 | 
						|
 | 
						|
	dev_dbg(info->device, "pan_display: xoffset: %i yoffset: %i base: %i\n",
 | 
						|
		var->xoffset, var->yoffset, base);
 | 
						|
 | 
						|
	switch (info->var.bits_per_pixel) {
 | 
						|
	case 8:
 | 
						|
		break;
 | 
						|
	case 15:
 | 
						|
	case 16:
 | 
						|
		base *= 2;
 | 
						|
		break;
 | 
						|
	case 24:
 | 
						|
		/*
 | 
						|
		 * The last bit does not seem to have any effect on the start
 | 
						|
		 * address register in 24bpp mode, so...
 | 
						|
		 */
 | 
						|
		base &= 0xFFFFFFFE; /* ...ignore the last bit. */
 | 
						|
		base *= 3;
 | 
						|
		break;
 | 
						|
	case 32:
 | 
						|
		base *= 4;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF;
 | 
						|
	par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >>  8;
 | 
						|
	par->ext_start_addr_hi = (base & 0x3FC00000) >> 22;
 | 
						|
	par->ext_start_addr =
 | 
						|
			((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE;
 | 
						|
 | 
						|
	i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_LO,  base & 0x000000FF);
 | 
						|
	i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_HI,
 | 
						|
			(base & 0x0000FF00) >> 8);
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI,
 | 
						|
			(base & 0x3FC00000) >> 22);
 | 
						|
	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR,
 | 
						|
			((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_blank(int blank_mode, struct fb_info *info)
 | 
						|
{
 | 
						|
	struct i740fb_par *par = info->par;
 | 
						|
 | 
						|
	unsigned char SEQ01;
 | 
						|
	int DPMSSyncSelect;
 | 
						|
 | 
						|
	switch (blank_mode) {
 | 
						|
	case FB_BLANK_UNBLANK:
 | 
						|
	case FB_BLANK_NORMAL:
 | 
						|
		SEQ01 = 0x00;
 | 
						|
		DPMSSyncSelect = HSYNC_ON | VSYNC_ON;
 | 
						|
		break;
 | 
						|
	case FB_BLANK_VSYNC_SUSPEND:
 | 
						|
		SEQ01 = 0x20;
 | 
						|
		DPMSSyncSelect = HSYNC_ON | VSYNC_OFF;
 | 
						|
		break;
 | 
						|
	case FB_BLANK_HSYNC_SUSPEND:
 | 
						|
		SEQ01 = 0x20;
 | 
						|
		DPMSSyncSelect = HSYNC_OFF | VSYNC_ON;
 | 
						|
		break;
 | 
						|
	case FB_BLANK_POWERDOWN:
 | 
						|
		SEQ01 = 0x20;
 | 
						|
		DPMSSyncSelect = HSYNC_OFF | VSYNC_OFF;
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
	/* Turn the screen on/off */
 | 
						|
	i740outb(par, SRX, 0x01);
 | 
						|
	SEQ01 |= i740inb(par, SRX + 1) & ~0x20;
 | 
						|
	i740outb(par, SRX, 0x01);
 | 
						|
	i740outb(par, SRX + 1, SEQ01);
 | 
						|
 | 
						|
	/* Set the DPMS mode */
 | 
						|
	i740outreg(par, XRX, DPMS_SYNC_SELECT, DPMSSyncSelect);
 | 
						|
 | 
						|
	/* Let fbcon do a soft blank for us */
 | 
						|
	return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct fb_ops i740fb_ops = {
 | 
						|
	.owner		= THIS_MODULE,
 | 
						|
	.fb_open	= i740fb_open,
 | 
						|
	.fb_release	= i740fb_release,
 | 
						|
	.fb_check_var	= i740fb_check_var,
 | 
						|
	.fb_set_par	= i740fb_set_par,
 | 
						|
	.fb_setcolreg	= i740fb_setcolreg,
 | 
						|
	.fb_blank	= i740fb_blank,
 | 
						|
	.fb_pan_display	= i740fb_pan_display,
 | 
						|
	.fb_fillrect	= cfb_fillrect,
 | 
						|
	.fb_copyarea	= cfb_copyarea,
 | 
						|
	.fb_imageblit	= cfb_imageblit,
 | 
						|
};
 | 
						|
 | 
						|
/* ------------------------------------------------------------------------- */
 | 
						|
 | 
						|
static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 | 
						|
{
 | 
						|
	struct fb_info *info;
 | 
						|
	struct i740fb_par *par;
 | 
						|
	int ret, tmp;
 | 
						|
	bool found = false;
 | 
						|
	u8 *edid;
 | 
						|
 | 
						|
	info = framebuffer_alloc(sizeof(struct i740fb_par), &(dev->dev));
 | 
						|
	if (!info) {
 | 
						|
		dev_err(&(dev->dev), "cannot allocate framebuffer\n");
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	par = info->par;
 | 
						|
	mutex_init(&par->open_lock);
 | 
						|
 | 
						|
	info->var.activate = FB_ACTIVATE_NOW;
 | 
						|
	info->var.bits_per_pixel = 8;
 | 
						|
	info->fbops = &i740fb_ops;
 | 
						|
	info->pseudo_palette = par->pseudo_palette;
 | 
						|
 | 
						|
	ret = pci_enable_device(dev);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(info->device, "cannot enable PCI device\n");
 | 
						|
		goto err_enable_device;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = pci_request_regions(dev, info->fix.id);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(info->device, "error requesting regions\n");
 | 
						|
		goto err_request_regions;
 | 
						|
	}
 | 
						|
 | 
						|
	info->screen_base = pci_ioremap_wc_bar(dev, 0);
 | 
						|
	if (!info->screen_base) {
 | 
						|
		dev_err(info->device, "error remapping base\n");
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto err_ioremap_1;
 | 
						|
	}
 | 
						|
 | 
						|
	par->regs = pci_ioremap_bar(dev, 1);
 | 
						|
	if (!par->regs) {
 | 
						|
		dev_err(info->device, "error remapping MMIO\n");
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto err_ioremap_2;
 | 
						|
	}
 | 
						|
 | 
						|
	/* detect memory size */
 | 
						|
	if ((i740inreg(par, XRX, DRAM_ROW_TYPE) & DRAM_ROW_1)
 | 
						|
							== DRAM_ROW_1_SDRAM)
 | 
						|
		i740outb(par, XRX, DRAM_ROW_BNDRY_1);
 | 
						|
	else
 | 
						|
		i740outb(par, XRX, DRAM_ROW_BNDRY_0);
 | 
						|
	info->screen_size = i740inb(par, XRX + 1) * 1024 * 1024;
 | 
						|
	/* detect memory type */
 | 
						|
	tmp = i740inreg(par, XRX, DRAM_ROW_CNTL_LO);
 | 
						|
	par->has_sgram = !((tmp & DRAM_RAS_TIMING) ||
 | 
						|
			   (tmp & DRAM_RAS_PRECHARGE));
 | 
						|
 | 
						|
	fb_info(info, "Intel740 on %s, %ld KB %s\n",
 | 
						|
		pci_name(dev), info->screen_size >> 10,
 | 
						|
		par->has_sgram ? "SGRAM" : "SDRAM");
 | 
						|
 | 
						|
	info->fix = i740fb_fix;
 | 
						|
	info->fix.mmio_start = pci_resource_start(dev, 1);
 | 
						|
	info->fix.mmio_len = pci_resource_len(dev, 1);
 | 
						|
	info->fix.smem_start = pci_resource_start(dev, 0);
 | 
						|
	info->fix.smem_len = info->screen_size;
 | 
						|
	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
 | 
						|
 | 
						|
	if (i740fb_setup_ddc_bus(info) == 0) {
 | 
						|
		par->ddc_registered = true;
 | 
						|
		edid = fb_ddc_read(&par->ddc_adapter);
 | 
						|
		if (edid) {
 | 
						|
			fb_edid_to_monspecs(edid, &info->monspecs);
 | 
						|
			kfree(edid);
 | 
						|
			if (!info->monspecs.modedb)
 | 
						|
				dev_err(info->device,
 | 
						|
					"error getting mode database\n");
 | 
						|
			else {
 | 
						|
				const struct fb_videomode *m;
 | 
						|
 | 
						|
				fb_videomode_to_modelist(
 | 
						|
					info->monspecs.modedb,
 | 
						|
					info->monspecs.modedb_len,
 | 
						|
					&info->modelist);
 | 
						|
				m = fb_find_best_display(&info->monspecs,
 | 
						|
							 &info->modelist);
 | 
						|
				if (m) {
 | 
						|
					fb_videomode_to_var(&info->var, m);
 | 
						|
					/* fill all other info->var's fields */
 | 
						|
					if (!i740fb_check_var(&info->var, info))
 | 
						|
						found = true;
 | 
						|
				}
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (!mode_option && !found)
 | 
						|
		mode_option = "640x480-8@60";
 | 
						|
 | 
						|
	if (mode_option) {
 | 
						|
		ret = fb_find_mode(&info->var, info, mode_option,
 | 
						|
				   info->monspecs.modedb,
 | 
						|
				   info->monspecs.modedb_len,
 | 
						|
				   NULL, info->var.bits_per_pixel);
 | 
						|
		if (!ret || ret == 4) {
 | 
						|
			dev_err(info->device, "mode %s not found\n",
 | 
						|
				mode_option);
 | 
						|
			ret = -EINVAL;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	fb_destroy_modedb(info->monspecs.modedb);
 | 
						|
	info->monspecs.modedb = NULL;
 | 
						|
 | 
						|
	/* maximize virtual vertical size for fast scrolling */
 | 
						|
	info->var.yres_virtual = info->fix.smem_len * 8 /
 | 
						|
			(info->var.bits_per_pixel * info->var.xres_virtual);
 | 
						|
 | 
						|
	if (ret == -EINVAL)
 | 
						|
		goto err_find_mode;
 | 
						|
 | 
						|
	ret = fb_alloc_cmap(&info->cmap, 256, 0);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(info->device, "cannot allocate colormap\n");
 | 
						|
		goto err_alloc_cmap;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = register_framebuffer(info);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(info->device, "error registering framebuffer\n");
 | 
						|
		goto err_reg_framebuffer;
 | 
						|
	}
 | 
						|
 | 
						|
	fb_info(info, "%s frame buffer device\n", info->fix.id);
 | 
						|
	pci_set_drvdata(dev, info);
 | 
						|
	if (mtrr)
 | 
						|
		par->wc_cookie = arch_phys_wc_add(info->fix.smem_start,
 | 
						|
						  info->fix.smem_len);
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_reg_framebuffer:
 | 
						|
	fb_dealloc_cmap(&info->cmap);
 | 
						|
err_alloc_cmap:
 | 
						|
err_find_mode:
 | 
						|
	if (par->ddc_registered)
 | 
						|
		i2c_del_adapter(&par->ddc_adapter);
 | 
						|
	pci_iounmap(dev, par->regs);
 | 
						|
err_ioremap_2:
 | 
						|
	pci_iounmap(dev, info->screen_base);
 | 
						|
err_ioremap_1:
 | 
						|
	pci_release_regions(dev);
 | 
						|
err_request_regions:
 | 
						|
/*	pci_disable_device(dev); */
 | 
						|
err_enable_device:
 | 
						|
	framebuffer_release(info);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void i740fb_remove(struct pci_dev *dev)
 | 
						|
{
 | 
						|
	struct fb_info *info = pci_get_drvdata(dev);
 | 
						|
 | 
						|
	if (info) {
 | 
						|
		struct i740fb_par *par = info->par;
 | 
						|
		arch_phys_wc_del(par->wc_cookie);
 | 
						|
		unregister_framebuffer(info);
 | 
						|
		fb_dealloc_cmap(&info->cmap);
 | 
						|
		if (par->ddc_registered)
 | 
						|
			i2c_del_adapter(&par->ddc_adapter);
 | 
						|
		pci_iounmap(dev, par->regs);
 | 
						|
		pci_iounmap(dev, info->screen_base);
 | 
						|
		pci_release_regions(dev);
 | 
						|
/*		pci_disable_device(dev); */
 | 
						|
		framebuffer_release(info);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_PM
 | 
						|
static int i740fb_suspend(struct pci_dev *dev, pm_message_t state)
 | 
						|
{
 | 
						|
	struct fb_info *info = pci_get_drvdata(dev);
 | 
						|
	struct i740fb_par *par = info->par;
 | 
						|
 | 
						|
	/* don't disable console during hibernation and wakeup from it */
 | 
						|
	if (state.event == PM_EVENT_FREEZE || state.event == PM_EVENT_PRETHAW)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	console_lock();
 | 
						|
	mutex_lock(&(par->open_lock));
 | 
						|
 | 
						|
	/* do nothing if framebuffer is not active */
 | 
						|
	if (par->ref_count == 0) {
 | 
						|
		mutex_unlock(&(par->open_lock));
 | 
						|
		console_unlock();
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	fb_set_suspend(info, 1);
 | 
						|
 | 
						|
	pci_save_state(dev);
 | 
						|
	pci_disable_device(dev);
 | 
						|
	pci_set_power_state(dev, pci_choose_state(dev, state));
 | 
						|
 | 
						|
	mutex_unlock(&(par->open_lock));
 | 
						|
	console_unlock();
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int i740fb_resume(struct pci_dev *dev)
 | 
						|
{
 | 
						|
	struct fb_info *info = pci_get_drvdata(dev);
 | 
						|
	struct i740fb_par *par = info->par;
 | 
						|
 | 
						|
	console_lock();
 | 
						|
	mutex_lock(&(par->open_lock));
 | 
						|
 | 
						|
	if (par->ref_count == 0)
 | 
						|
		goto fail;
 | 
						|
 | 
						|
	pci_set_power_state(dev, PCI_D0);
 | 
						|
	pci_restore_state(dev);
 | 
						|
	if (pci_enable_device(dev))
 | 
						|
		goto fail;
 | 
						|
 | 
						|
	i740fb_set_par(info);
 | 
						|
	fb_set_suspend(info, 0);
 | 
						|
 | 
						|
fail:
 | 
						|
	mutex_unlock(&(par->open_lock));
 | 
						|
	console_unlock();
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#else
 | 
						|
#define i740fb_suspend NULL
 | 
						|
#define i740fb_resume NULL
 | 
						|
#endif /* CONFIG_PM */
 | 
						|
 | 
						|
#define I740_ID_PCI 0x00d1
 | 
						|
#define I740_ID_AGP 0x7800
 | 
						|
 | 
						|
static const struct pci_device_id i740fb_id_table[] = {
 | 
						|
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_PCI) },
 | 
						|
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_AGP) },
 | 
						|
	{ 0 }
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(pci, i740fb_id_table);
 | 
						|
 | 
						|
static struct pci_driver i740fb_driver = {
 | 
						|
	.name		= "i740fb",
 | 
						|
	.id_table	= i740fb_id_table,
 | 
						|
	.probe		= i740fb_probe,
 | 
						|
	.remove		= i740fb_remove,
 | 
						|
	.suspend	= i740fb_suspend,
 | 
						|
	.resume		= i740fb_resume,
 | 
						|
};
 | 
						|
 | 
						|
#ifndef MODULE
 | 
						|
static int  __init i740fb_setup(char *options)
 | 
						|
{
 | 
						|
	char *opt;
 | 
						|
 | 
						|
	if (!options || !*options)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	while ((opt = strsep(&options, ",")) != NULL) {
 | 
						|
		if (!*opt)
 | 
						|
			continue;
 | 
						|
		else if (!strncmp(opt, "mtrr:", 5))
 | 
						|
			mtrr = simple_strtoul(opt + 5, NULL, 0);
 | 
						|
		else
 | 
						|
			mode_option = opt;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static int __init i740fb_init(void)
 | 
						|
{
 | 
						|
#ifndef MODULE
 | 
						|
	char *option = NULL;
 | 
						|
 | 
						|
	if (fb_get_options("i740fb", &option))
 | 
						|
		return -ENODEV;
 | 
						|
	i740fb_setup(option);
 | 
						|
#endif
 | 
						|
 | 
						|
	return pci_register_driver(&i740fb_driver);
 | 
						|
}
 | 
						|
 | 
						|
static void __exit i740fb_exit(void)
 | 
						|
{
 | 
						|
	pci_unregister_driver(&i740fb_driver);
 | 
						|
}
 | 
						|
 | 
						|
module_init(i740fb_init);
 | 
						|
module_exit(i740fb_exit);
 | 
						|
 | 
						|
MODULE_AUTHOR("(c) 2011 Ondrej Zary <linux@rainbow-software.org>");
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
MODULE_DESCRIPTION("fbdev driver for Intel740");
 | 
						|
 | 
						|
module_param(mode_option, charp, 0444);
 | 
						|
MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
 | 
						|
 | 
						|
module_param(mtrr, int, 0444);
 | 
						|
MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
 |