279 lines
7.1 KiB
C
279 lines
7.1 KiB
C
/*
|
|
* Pentium 4/Xeon CPU on demand clock modulation/speed scaling
|
|
* (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
|
|
* (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
|
|
* (C) 2002 Arjan van de Ven <arjanv@redhat.com>
|
|
* (C) 2002 Tora T. Engstad
|
|
* All Rights Reserved
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* The author(s) of this software shall not be held liable for damages
|
|
* of any nature resulting due to the use of this software. This
|
|
* software is provided AS-IS with no warranties.
|
|
*
|
|
* Date Errata Description
|
|
* 20020525 N44, O17 12.5% or 25% DC causes lockup
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/timex.h>
|
|
|
|
#include <asm/processor.h>
|
|
#include <asm/msr.h>
|
|
#include <asm/timer.h>
|
|
#include <asm/cpu_device_id.h>
|
|
|
|
#include "speedstep-lib.h"
|
|
|
|
/*
|
|
* Duty Cycle (3bits), note DC_DISABLE is not specified in
|
|
* intel docs i just use it to mean disable
|
|
*/
|
|
enum {
|
|
DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
|
|
DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
|
|
};
|
|
|
|
#define DC_ENTRIES 8
|
|
|
|
|
|
static int has_N44_O17_errata[NR_CPUS];
|
|
static unsigned int stock_freq;
|
|
static struct cpufreq_driver p4clockmod_driver;
|
|
static unsigned int cpufreq_p4_get(unsigned int cpu);
|
|
|
|
static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
|
|
{
|
|
u32 l, h;
|
|
|
|
if ((newstate > DC_DISABLE) || (newstate == DC_RESV))
|
|
return -EINVAL;
|
|
|
|
rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
|
|
|
|
if (l & 0x01)
|
|
pr_debug("CPU#%d currently thermal throttled\n", cpu);
|
|
|
|
if (has_N44_O17_errata[cpu] &&
|
|
(newstate == DC_25PT || newstate == DC_DFLT))
|
|
newstate = DC_38PT;
|
|
|
|
rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
|
|
if (newstate == DC_DISABLE) {
|
|
pr_debug("CPU#%d disabling modulation\n", cpu);
|
|
wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
|
|
} else {
|
|
pr_debug("CPU#%d setting duty cycle to %d%%\n",
|
|
cpu, ((125 * newstate) / 10));
|
|
/* bits 63 - 5 : reserved
|
|
* bit 4 : enable/disable
|
|
* bits 3-1 : duty cycle
|
|
* bit 0 : reserved
|
|
*/
|
|
l = (l & ~14);
|
|
l = l | (1<<4) | ((newstate & 0x7)<<1);
|
|
wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct cpufreq_frequency_table p4clockmod_table[] = {
|
|
{0, DC_RESV, CPUFREQ_ENTRY_INVALID},
|
|
{0, DC_DFLT, 0},
|
|
{0, DC_25PT, 0},
|
|
{0, DC_38PT, 0},
|
|
{0, DC_50PT, 0},
|
|
{0, DC_64PT, 0},
|
|
{0, DC_75PT, 0},
|
|
{0, DC_88PT, 0},
|
|
{0, DC_DISABLE, 0},
|
|
{0, DC_RESV, CPUFREQ_TABLE_END},
|
|
};
|
|
|
|
|
|
static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index)
|
|
{
|
|
int i;
|
|
|
|
/* run on each logical CPU,
|
|
* see section 13.15.3 of IA32 Intel Architecture Software
|
|
* Developer's Manual, Volume 3
|
|
*/
|
|
for_each_cpu(i, policy->cpus)
|
|
cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
|
|
{
|
|
if (c->x86 == 0x06) {
|
|
if (cpu_has(c, X86_FEATURE_EST))
|
|
pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n");
|
|
switch (c->x86_model) {
|
|
case 0x0E: /* Core */
|
|
case 0x0F: /* Core Duo */
|
|
case 0x16: /* Celeron Core */
|
|
case 0x1C: /* Atom */
|
|
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
|
|
return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
|
|
case 0x0D: /* Pentium M (Dothan) */
|
|
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
|
|
/* fall through */
|
|
case 0x09: /* Pentium M (Banias) */
|
|
return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
|
|
}
|
|
}
|
|
|
|
if (c->x86 != 0xF)
|
|
return 0;
|
|
|
|
/* on P-4s, the TSC runs with constant frequency independent whether
|
|
* throttling is active or not. */
|
|
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
|
|
|
|
if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
|
|
pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n");
|
|
return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
|
|
}
|
|
|
|
return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
|
|
}
|
|
|
|
|
|
|
|
static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
|
|
{
|
|
struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
|
|
int cpuid = 0;
|
|
unsigned int i;
|
|
|
|
#ifdef CONFIG_SMP
|
|
cpumask_copy(policy->cpus, topology_sibling_cpumask(policy->cpu));
|
|
#endif
|
|
|
|
/* Errata workaround */
|
|
cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping;
|
|
switch (cpuid) {
|
|
case 0x0f07:
|
|
case 0x0f0a:
|
|
case 0x0f11:
|
|
case 0x0f12:
|
|
has_N44_O17_errata[policy->cpu] = 1;
|
|
pr_debug("has errata -- disabling low frequencies\n");
|
|
}
|
|
|
|
if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
|
|
c->x86_model < 2) {
|
|
/* switch to maximum frequency and measure result */
|
|
cpufreq_p4_setdc(policy->cpu, DC_DISABLE);
|
|
recalibrate_cpu_khz();
|
|
}
|
|
/* get max frequency */
|
|
stock_freq = cpufreq_p4_get_frequency(c);
|
|
if (!stock_freq)
|
|
return -EINVAL;
|
|
|
|
/* table init */
|
|
for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
|
|
if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
|
|
p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
|
|
else
|
|
p4clockmod_table[i].frequency = (stock_freq * i)/8;
|
|
}
|
|
|
|
/* cpuinfo and default policy values */
|
|
|
|
/* the transition latency is set to be 1 higher than the maximum
|
|
* transition latency of the ondemand governor */
|
|
policy->cpuinfo.transition_latency = 10000001;
|
|
policy->freq_table = &p4clockmod_table[0];
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static unsigned int cpufreq_p4_get(unsigned int cpu)
|
|
{
|
|
u32 l, h;
|
|
|
|
rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
|
|
|
|
if (l & 0x10) {
|
|
l = l >> 1;
|
|
l &= 0x7;
|
|
} else
|
|
l = DC_DISABLE;
|
|
|
|
if (l != DC_DISABLE)
|
|
return stock_freq * l / 8;
|
|
|
|
return stock_freq;
|
|
}
|
|
|
|
static struct cpufreq_driver p4clockmod_driver = {
|
|
.verify = cpufreq_generic_frequency_table_verify,
|
|
.target_index = cpufreq_p4_target,
|
|
.init = cpufreq_p4_cpu_init,
|
|
.get = cpufreq_p4_get,
|
|
.name = "p4-clockmod",
|
|
.attr = cpufreq_generic_attr,
|
|
};
|
|
|
|
static const struct x86_cpu_id cpufreq_p4_id[] = {
|
|
{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ACC },
|
|
{}
|
|
};
|
|
|
|
/*
|
|
* Intentionally no MODULE_DEVICE_TABLE here: this driver should not
|
|
* be auto loaded. Please don't add one.
|
|
*/
|
|
|
|
static int __init cpufreq_p4_init(void)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* THERM_CONTROL is architectural for IA32 now, so
|
|
* we can rely on the capability checks
|
|
*/
|
|
if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI))
|
|
return -ENODEV;
|
|
|
|
ret = cpufreq_register_driver(&p4clockmod_driver);
|
|
if (!ret)
|
|
pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static void __exit cpufreq_p4_exit(void)
|
|
{
|
|
cpufreq_unregister_driver(&p4clockmod_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
|
|
MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
late_initcall(cpufreq_p4_init);
|
|
module_exit(cpufreq_p4_exit);
|