680 lines
20 KiB
C
680 lines
20 KiB
C
/*
|
|
* budget-patch.c: driver for Budget Patch,
|
|
* hardware modification of DVB-S cards enabling full TS
|
|
*
|
|
* Written by Emard <emard@softhome.net>
|
|
*
|
|
* Original idea by Roberto Deza <rdeza@unav.es>
|
|
*
|
|
* Special thanks to Holger Waechtler, Michael Hunold, Marian Durkovic
|
|
* and Metzlerbros
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* To obtain the license, point your browser to
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*
|
|
*
|
|
* the project's page is at https://linuxtv.org
|
|
*/
|
|
|
|
#include "av7110.h"
|
|
#include "av7110_hw.h"
|
|
#include "budget.h"
|
|
#include "stv0299.h"
|
|
#include "ves1x93.h"
|
|
#include "tda8083.h"
|
|
|
|
#include "bsru6.h"
|
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
#define budget_patch budget
|
|
|
|
static struct saa7146_extension budget_extension;
|
|
|
|
MAKE_BUDGET_INFO(ttbp, "TT-Budget/Patch DVB-S 1.x PCI", BUDGET_PATCH);
|
|
//MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC);
|
|
|
|
static const struct pci_device_id pci_tbl[] = {
|
|
MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
|
|
// MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
|
|
{
|
|
.vendor = 0,
|
|
}
|
|
};
|
|
|
|
/* those lines are for budget-patch to be tried
|
|
** on a true budget card and observe the
|
|
** behaviour of VSYNC generated by rps1.
|
|
** this code was shamelessly copy/pasted from budget.c
|
|
*/
|
|
static void gpio_Set22K (struct budget *budget, int state)
|
|
{
|
|
struct saa7146_dev *dev=budget->dev;
|
|
dprintk(2, "budget: %p\n", budget);
|
|
saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
|
|
}
|
|
|
|
/* Diseqc functions only for TT Budget card */
|
|
/* taken from the Skyvision DVB driver by
|
|
Ralph Metzler <rjkm@metzlerbros.de> */
|
|
|
|
static void DiseqcSendBit (struct budget *budget, int data)
|
|
{
|
|
struct saa7146_dev *dev=budget->dev;
|
|
dprintk(2, "budget: %p\n", budget);
|
|
|
|
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
|
|
udelay(data ? 500 : 1000);
|
|
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
|
|
udelay(data ? 1000 : 500);
|
|
}
|
|
|
|
static void DiseqcSendByte (struct budget *budget, int data)
|
|
{
|
|
int i, par=1, d;
|
|
|
|
dprintk(2, "budget: %p\n", budget);
|
|
|
|
for (i=7; i>=0; i--) {
|
|
d = (data>>i)&1;
|
|
par ^= d;
|
|
DiseqcSendBit(budget, d);
|
|
}
|
|
|
|
DiseqcSendBit(budget, par);
|
|
}
|
|
|
|
static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
|
|
{
|
|
struct saa7146_dev *dev=budget->dev;
|
|
int i;
|
|
|
|
dprintk(2, "budget: %p\n", budget);
|
|
|
|
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
|
|
mdelay(16);
|
|
|
|
for (i=0; i<len; i++)
|
|
DiseqcSendByte(budget, msg[i]);
|
|
|
|
mdelay(16);
|
|
|
|
if (burst!=-1) {
|
|
if (burst)
|
|
DiseqcSendByte(budget, 0xff);
|
|
else {
|
|
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
|
|
mdelay(12);
|
|
udelay(500);
|
|
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
|
|
}
|
|
msleep(20);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* shamelessly copy/pasted from budget.c */
|
|
static int budget_set_tone(struct dvb_frontend *fe,
|
|
enum fe_sec_tone_mode tone)
|
|
{
|
|
struct budget* budget = (struct budget*) fe->dvb->priv;
|
|
|
|
switch (tone) {
|
|
case SEC_TONE_ON:
|
|
gpio_Set22K (budget, 1);
|
|
break;
|
|
|
|
case SEC_TONE_OFF:
|
|
gpio_Set22K (budget, 0);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
|
|
{
|
|
struct budget* budget = (struct budget*) fe->dvb->priv;
|
|
|
|
SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int budget_diseqc_send_burst(struct dvb_frontend *fe,
|
|
enum fe_sec_mini_cmd minicmd)
|
|
{
|
|
struct budget* budget = (struct budget*) fe->dvb->priv;
|
|
|
|
SendDiSEqCMsg (budget, 0, NULL, minicmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length)
|
|
{
|
|
int i;
|
|
|
|
dprintk(2, "budget: %p\n", budget);
|
|
|
|
for (i = 2; i < length; i++)
|
|
{
|
|
ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
|
|
msleep(5);
|
|
}
|
|
if (length)
|
|
ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
|
|
else
|
|
ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
|
|
msleep(5);
|
|
ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
|
|
msleep(5);
|
|
return 0;
|
|
}
|
|
|
|
static void av7110_set22k(struct budget_patch *budget, int state)
|
|
{
|
|
u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
|
|
|
|
dprintk(2, "budget: %p\n", budget);
|
|
budget_av7110_send_fw_cmd(budget, buf, 2);
|
|
}
|
|
|
|
static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst)
|
|
{
|
|
int i;
|
|
u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
|
|
16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
|
|
|
|
dprintk(2, "budget: %p\n", budget);
|
|
|
|
if (len>10)
|
|
len=10;
|
|
|
|
buf[1] = len+2;
|
|
buf[2] = len;
|
|
|
|
if (burst != -1)
|
|
buf[3]=burst ? 0x01 : 0x00;
|
|
else
|
|
buf[3]=0xffff;
|
|
|
|
for (i=0; i<len; i++)
|
|
buf[i+4]=msg[i];
|
|
|
|
budget_av7110_send_fw_cmd(budget, buf, 18);
|
|
return 0;
|
|
}
|
|
|
|
static int budget_patch_set_tone(struct dvb_frontend *fe,
|
|
enum fe_sec_tone_mode tone)
|
|
{
|
|
struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
|
|
|
|
switch (tone) {
|
|
case SEC_TONE_ON:
|
|
av7110_set22k (budget, 1);
|
|
break;
|
|
|
|
case SEC_TONE_OFF:
|
|
av7110_set22k (budget, 0);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int budget_patch_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
|
|
{
|
|
struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
|
|
|
|
av7110_send_diseqc_msg (budget, cmd->msg_len, cmd->msg, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int budget_patch_diseqc_send_burst(struct dvb_frontend *fe,
|
|
enum fe_sec_mini_cmd minicmd)
|
|
{
|
|
struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
|
|
|
|
av7110_send_diseqc_msg (budget, 0, NULL, minicmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
|
|
u8 pwr = 0;
|
|
u8 buf[4];
|
|
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
|
|
u32 div = (p->frequency + 479500) / 125;
|
|
|
|
if (p->frequency > 2000000)
|
|
pwr = 3;
|
|
else if (p->frequency > 1800000)
|
|
pwr = 2;
|
|
else if (p->frequency > 1600000)
|
|
pwr = 1;
|
|
else if (p->frequency > 1200000)
|
|
pwr = 0;
|
|
else if (p->frequency >= 1100000)
|
|
pwr = 1;
|
|
else pwr = 2;
|
|
|
|
buf[0] = (div >> 8) & 0x7f;
|
|
buf[1] = div & 0xff;
|
|
buf[2] = ((div & 0x18000) >> 10) | 0x95;
|
|
buf[3] = (pwr << 6) | 0x30;
|
|
|
|
// NOTE: since we're using a prescaler of 2, we set the
|
|
// divisor frequency to 62.5kHz and divide by 125 above
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static struct ves1x93_config alps_bsrv2_config = {
|
|
.demod_address = 0x08,
|
|
.xin = 90100000UL,
|
|
.invert_pwm = 0,
|
|
};
|
|
|
|
static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
|
|
u32 div;
|
|
u8 data[4];
|
|
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
|
|
|
|
div = p->frequency / 125;
|
|
data[0] = (div >> 8) & 0x7f;
|
|
data[1] = div & 0xff;
|
|
data[2] = 0x8e;
|
|
data[3] = 0x00;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static struct tda8083_config grundig_29504_451_config = {
|
|
.demod_address = 0x68,
|
|
};
|
|
|
|
static void frontend_init(struct budget_patch* budget)
|
|
{
|
|
switch(budget->dev->pci->subsystem_device) {
|
|
case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X
|
|
case 0x1013: // SATELCO Multimedia PCI
|
|
|
|
// try the ALPS BSRV2 first of all
|
|
budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap);
|
|
if (budget->dvb_frontend) {
|
|
budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
|
|
budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_patch_diseqc_send_master_cmd;
|
|
budget->dvb_frontend->ops.diseqc_send_burst = budget_patch_diseqc_send_burst;
|
|
budget->dvb_frontend->ops.set_tone = budget_patch_set_tone;
|
|
break;
|
|
}
|
|
|
|
// try the ALPS BSRU6 now
|
|
budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
|
|
if (budget->dvb_frontend) {
|
|
budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
|
|
budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
|
|
|
|
budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
|
|
budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
|
|
budget->dvb_frontend->ops.set_tone = budget_set_tone;
|
|
break;
|
|
}
|
|
|
|
// Try the grundig 29504-451
|
|
budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);
|
|
if (budget->dvb_frontend) {
|
|
budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
|
|
budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
|
|
budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
|
|
budget->dvb_frontend->ops.set_tone = budget_set_tone;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (budget->dvb_frontend == NULL) {
|
|
printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
|
|
budget->dev->pci->vendor,
|
|
budget->dev->pci->device,
|
|
budget->dev->pci->subsystem_vendor,
|
|
budget->dev->pci->subsystem_device);
|
|
} else {
|
|
if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) {
|
|
printk("budget-av: Frontend registration failed!\n");
|
|
dvb_frontend_detach(budget->dvb_frontend);
|
|
budget->dvb_frontend = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* written by Emard */
|
|
static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
|
|
{
|
|
struct budget_patch *budget;
|
|
int err;
|
|
int count = 0;
|
|
int detected = 0;
|
|
|
|
#define PATCH_RESET 0
|
|
#define RPS_IRQ 0
|
|
#define HPS_SETUP 0
|
|
#if PATCH_RESET
|
|
saa7146_write(dev, MC1, MASK_31);
|
|
msleep(40);
|
|
#endif
|
|
#if HPS_SETUP
|
|
// initialize registers. Better to have it like this
|
|
// than leaving something unconfigured
|
|
saa7146_write(dev, DD1_STREAM_B, 0);
|
|
// port B VSYNC at rising edge
|
|
saa7146_write(dev, DD1_INIT, 0x00000200); // have this in budget-core too!
|
|
saa7146_write(dev, BRS_CTRL, 0x00000000); // VBI
|
|
|
|
// debi config
|
|
// saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18);
|
|
|
|
// zero all HPS registers
|
|
saa7146_write(dev, HPS_H_PRESCALE, 0); // r68
|
|
saa7146_write(dev, HPS_H_SCALE, 0); // r6c
|
|
saa7146_write(dev, BCS_CTRL, 0); // r70
|
|
saa7146_write(dev, HPS_V_SCALE, 0); // r60
|
|
saa7146_write(dev, HPS_V_GAIN, 0); // r64
|
|
saa7146_write(dev, CHROMA_KEY_RANGE, 0); // r74
|
|
saa7146_write(dev, CLIP_FORMAT_CTRL, 0); // r78
|
|
// Set HPS prescaler for port B input
|
|
saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
|
|
saa7146_write(dev, MC2,
|
|
0 * (MASK_08 | MASK_24) | // BRS control
|
|
0 * (MASK_09 | MASK_25) | // a
|
|
0 * (MASK_10 | MASK_26) | // b
|
|
1 * (MASK_06 | MASK_22) | // HPS_CTRL1
|
|
1 * (MASK_05 | MASK_21) | // HPS_CTRL2
|
|
0 * (MASK_01 | MASK_15) // DEBI
|
|
);
|
|
#endif
|
|
// Disable RPS1 and RPS0
|
|
saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
|
|
// RPS1 timeout disable
|
|
saa7146_write(dev, RPS_TOV1, 0);
|
|
|
|
// code for autodetection
|
|
// will wait for VBI_B event (vertical blank at port B)
|
|
// and will reset GPIO3 after VBI_B is detected.
|
|
// (GPIO3 should be raised high by CPU to
|
|
// test if GPIO3 will generate vertical blank signal
|
|
// in budget patch GPIO3 is connected to VSYNC_B
|
|
count = 0;
|
|
#if 0
|
|
WRITE_RPS1(CMD_UPLOAD |
|
|
MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 );
|
|
#endif
|
|
WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
|
|
WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
|
|
WRITE_RPS1(GPIO3_MSK);
|
|
WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
|
|
#if RPS_IRQ
|
|
// issue RPS1 interrupt to increment counter
|
|
WRITE_RPS1(CMD_INTERRUPT);
|
|
// at least a NOP is neede between two interrupts
|
|
WRITE_RPS1(CMD_NOP);
|
|
// interrupt again
|
|
WRITE_RPS1(CMD_INTERRUPT);
|
|
#endif
|
|
WRITE_RPS1(CMD_STOP);
|
|
|
|
#if RPS_IRQ
|
|
// set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
|
|
// use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
|
|
// use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
|
|
saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
|
|
// set event counter 1 threshold to maximum allowed value (rEC p55)
|
|
saa7146_write(dev, ECT1R, 0x3fff );
|
|
#endif
|
|
// Fix VSYNC level
|
|
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
|
|
// Set RPS1 Address register to point to RPS code (r108 p42)
|
|
saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
|
|
// Enable RPS1, (rFC p33)
|
|
saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
|
|
|
|
|
|
mdelay(50);
|
|
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
|
|
mdelay(150);
|
|
|
|
|
|
if( (saa7146_read(dev, GPIO_CTRL) & 0x10000000) == 0)
|
|
detected = 1;
|
|
|
|
#if RPS_IRQ
|
|
printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
|
|
#endif
|
|
// Disable RPS1
|
|
saa7146_write(dev, MC1, ( MASK_29 ));
|
|
|
|
if(detected == 0)
|
|
printk("budget-patch not detected or saa7146 in non-default state.\n"
|
|
"try enabling resetting of 7146 with MASK_31 in MC1 register\n");
|
|
|
|
else
|
|
printk("BUDGET-PATCH DETECTED.\n");
|
|
|
|
|
|
/* OLD (Original design by Roberto Deza):
|
|
** This code will setup the SAA7146_RPS1 to generate a square
|
|
** wave on GPIO3, changing when a field (TS_HEIGHT/2 "lines" of
|
|
** TS_WIDTH packets) has been acquired on SAA7146_D1B video port;
|
|
** then, this GPIO3 output which is connected to the D1B_VSYNC
|
|
** input, will trigger the acquisition of the alternate field
|
|
** and so on.
|
|
** Currently, the TT_budget / WinTV_Nova cards have two ICs
|
|
** (74HCT4040, LVC74) for the generation of this VSYNC signal,
|
|
** which seems that can be done perfectly without this :-)).
|
|
*/
|
|
|
|
/* New design (By Emard)
|
|
** this rps1 code will copy internal HS event to GPIO3 pin.
|
|
** GPIO3 is in budget-patch hardware connected to port B VSYNC
|
|
|
|
** HS is an internal event of 7146, accessible with RPS
|
|
** and temporarily raised high every n lines
|
|
** (n in defined in the RPS_THRESH1 counter threshold)
|
|
** I think HS is raised high on the beginning of the n-th line
|
|
** and remains high until this n-th line that triggered
|
|
** it is completely received. When the reception of n-th line
|
|
** ends, HS is lowered.
|
|
|
|
** To transmit data over DMA, 7146 needs changing state at
|
|
** port B VSYNC pin. Any changing of port B VSYNC will
|
|
** cause some DMA data transfer, with more or less packets loss.
|
|
** It depends on the phase and frequency of VSYNC and
|
|
** the way of 7146 is instructed to trigger on port B (defined
|
|
** in DD1_INIT register, 3rd nibble from the right valid
|
|
** numbers are 0-7, see datasheet)
|
|
**
|
|
** The correct triggering can minimize packet loss,
|
|
** dvbtraffic should give this stable bandwidths:
|
|
** 22k transponder = 33814 kbit/s
|
|
** 27.5k transponder = 38045 kbit/s
|
|
** by experiment it is found that the best results
|
|
** (stable bandwidths and almost no packet loss)
|
|
** are obtained using DD1_INIT triggering number 2
|
|
** (Va at rising edge of VS Fa = HS x VS-failing forced toggle)
|
|
** and a VSYNC phase that occurs in the middle of DMA transfer
|
|
** (about byte 188*512=96256 in the DMA window).
|
|
**
|
|
** Phase of HS is still not clear to me how to control,
|
|
** It just happens to be so. It can be seen if one enables
|
|
** RPS_IRQ and print Event Counter 1 in vpeirq(). Every
|
|
** time RPS_INTERRUPT is called, the Event Counter 1 will
|
|
** increment. That's how the 7146 is programmed to do event
|
|
** counting in this budget-patch.c
|
|
** I *think* HPS setting has something to do with the phase
|
|
** of HS but I can't be 100% sure in that.
|
|
|
|
** hardware debug note: a working budget card (including budget patch)
|
|
** with vpeirq() interrupt setup in mode "0x90" (every 64K) will
|
|
** generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
|
|
** and that means 3*25=75 Hz of interrupt frequency, as seen by
|
|
** watch cat /proc/interrupts
|
|
**
|
|
** If this frequency is 3x lower (and data received in the DMA
|
|
** buffer don't start with 0x47, but in the middle of packets,
|
|
** whose lengths appear to be like 188 292 188 104 etc.
|
|
** this means VSYNC line is not connected in the hardware.
|
|
** (check soldering pcb and pins)
|
|
** The same behaviour of missing VSYNC can be duplicated on budget
|
|
** cards, by setting DD1_INIT trigger mode 7 in 3rd nibble.
|
|
*/
|
|
|
|
// Setup RPS1 "program" (p35)
|
|
count = 0;
|
|
|
|
|
|
// Wait Source Line Counter Threshold (p36)
|
|
WRITE_RPS1(CMD_PAUSE | EVT_HS);
|
|
// Set GPIO3=1 (p42)
|
|
WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
|
|
WRITE_RPS1(GPIO3_MSK);
|
|
WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
|
|
#if RPS_IRQ
|
|
// issue RPS1 interrupt
|
|
WRITE_RPS1(CMD_INTERRUPT);
|
|
#endif
|
|
// Wait reset Source Line Counter Threshold (p36)
|
|
WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
|
|
// Set GPIO3=0 (p42)
|
|
WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
|
|
WRITE_RPS1(GPIO3_MSK);
|
|
WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
|
|
#if RPS_IRQ
|
|
// issue RPS1 interrupt
|
|
WRITE_RPS1(CMD_INTERRUPT);
|
|
#endif
|
|
// Jump to begin of RPS program (p37)
|
|
WRITE_RPS1(CMD_JUMP);
|
|
WRITE_RPS1(dev->d_rps1.dma_handle);
|
|
|
|
// Fix VSYNC level
|
|
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
|
|
// Set RPS1 Address register to point to RPS code (r108 p42)
|
|
saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
|
|
|
|
if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
|
|
return -ENOMEM;
|
|
|
|
dprintk(2, "budget: %p\n", budget);
|
|
|
|
err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr);
|
|
if (err) {
|
|
kfree(budget);
|
|
return err;
|
|
}
|
|
|
|
// Set Source Line Counter Threshold, using BRS (rCC p43)
|
|
// It generates HS event every TS_HEIGHT lines
|
|
// this is related to TS_WIDTH set in register
|
|
// NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
|
|
// low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
|
|
//,then RPS_THRESH1
|
|
// should be set to trigger every TS_HEIGHT (512) lines.
|
|
//
|
|
saa7146_write(dev, RPS_THRESH1, budget->buffer_height | MASK_12 );
|
|
|
|
// saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
|
|
// Enable RPS1 (rFC p33)
|
|
saa7146_write(dev, MC1, (MASK_13 | MASK_29));
|
|
|
|
|
|
dev->ext_priv = budget;
|
|
|
|
budget->dvb_adapter.priv = budget;
|
|
frontend_init(budget);
|
|
|
|
ttpci_budget_init_hooks(budget);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int budget_patch_detach (struct saa7146_dev* dev)
|
|
{
|
|
struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
|
|
int err;
|
|
|
|
if (budget->dvb_frontend) {
|
|
dvb_unregister_frontend(budget->dvb_frontend);
|
|
dvb_frontend_detach(budget->dvb_frontend);
|
|
}
|
|
err = ttpci_budget_deinit (budget);
|
|
|
|
kfree (budget);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int __init budget_patch_init(void)
|
|
{
|
|
return saa7146_register_extension(&budget_extension);
|
|
}
|
|
|
|
static void __exit budget_patch_exit(void)
|
|
{
|
|
saa7146_unregister_extension(&budget_extension);
|
|
}
|
|
|
|
static struct saa7146_extension budget_extension = {
|
|
.name = "budget_patch dvb",
|
|
.flags = 0,
|
|
|
|
.module = THIS_MODULE,
|
|
.pci_tbl = pci_tbl,
|
|
.attach = budget_patch_attach,
|
|
.detach = budget_patch_detach,
|
|
|
|
.irq_mask = MASK_10,
|
|
.irq_func = ttpci_budget_irq10_handler,
|
|
};
|
|
|
|
module_init(budget_patch_init);
|
|
module_exit(budget_patch_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
|
|
MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 based so-called Budget Patch cards");
|