341 lines
		
	
	
		
			9.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			341 lines
		
	
	
		
			9.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Imagination Technologies PowerDown Controller Watchdog Timer.
 | 
						|
 *
 | 
						|
 * Copyright (c) 2014 Imagination Technologies Ltd.
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or modify it
 | 
						|
 * under the terms of the GNU General Public License version 2 as published by
 | 
						|
 * the Free Software Foundation.
 | 
						|
 *
 | 
						|
 * Based on drivers/watchdog/sunxi_wdt.c Copyright (c) 2013 Carlo Caione
 | 
						|
 *                                                     2012 Henrik Nordstrom
 | 
						|
 *
 | 
						|
 * Notes
 | 
						|
 * -----
 | 
						|
 * The timeout value is rounded to the next power of two clock cycles.
 | 
						|
 * This is configured using the PDC_WDT_CONFIG register, according to this
 | 
						|
 * formula:
 | 
						|
 *
 | 
						|
 *     timeout = 2^(delay + 1) clock cycles
 | 
						|
 *
 | 
						|
 * Where 'delay' is the value written in PDC_WDT_CONFIG register.
 | 
						|
 *
 | 
						|
 * Therefore, the hardware only allows to program watchdog timeouts, expressed
 | 
						|
 * as a power of two number of watchdog clock cycles. The current implementation
 | 
						|
 * guarantees that the actual watchdog timeout will be _at least_ the value
 | 
						|
 * programmed in the imgpdg_wdt driver.
 | 
						|
 *
 | 
						|
 * The following table shows how the user-configured timeout relates
 | 
						|
 * to the actual hardware timeout (watchdog clock @ 40000 Hz):
 | 
						|
 *
 | 
						|
 * input timeout | WD_DELAY | actual timeout
 | 
						|
 * -----------------------------------
 | 
						|
 *      10       |   18     |  13 seconds
 | 
						|
 *      20       |   19     |  26 seconds
 | 
						|
 *      30       |   20     |  52 seconds
 | 
						|
 *      60       |   21     |  104 seconds
 | 
						|
 *
 | 
						|
 * Albeit coarse, this granularity would suffice most watchdog uses.
 | 
						|
 * If the platform allows it, the user should be able to change the watchdog
 | 
						|
 * clock rate and achieve a finer timeout granularity.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/clk.h>
 | 
						|
#include <linux/io.h>
 | 
						|
#include <linux/log2.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/mod_devicetable.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/watchdog.h>
 | 
						|
 | 
						|
/* registers */
 | 
						|
#define PDC_WDT_SOFT_RESET		0x00
 | 
						|
#define PDC_WDT_CONFIG			0x04
 | 
						|
  #define PDC_WDT_CONFIG_ENABLE		BIT(31)
 | 
						|
  #define PDC_WDT_CONFIG_DELAY_MASK	0x1f
 | 
						|
 | 
						|
#define PDC_WDT_TICKLE1			0x08
 | 
						|
#define PDC_WDT_TICKLE1_MAGIC		0xabcd1234
 | 
						|
#define PDC_WDT_TICKLE2			0x0c
 | 
						|
#define PDC_WDT_TICKLE2_MAGIC		0x4321dcba
 | 
						|
 | 
						|
#define PDC_WDT_TICKLE_STATUS_MASK	0x7
 | 
						|
#define PDC_WDT_TICKLE_STATUS_SHIFT	0
 | 
						|
#define PDC_WDT_TICKLE_STATUS_HRESET	0x0  /* Hard reset */
 | 
						|
#define PDC_WDT_TICKLE_STATUS_TIMEOUT	0x1  /* Timeout */
 | 
						|
#define PDC_WDT_TICKLE_STATUS_TICKLE	0x2  /* Tickled incorrectly */
 | 
						|
#define PDC_WDT_TICKLE_STATUS_SRESET	0x3  /* Soft reset */
 | 
						|
#define PDC_WDT_TICKLE_STATUS_USER	0x4  /* User reset */
 | 
						|
 | 
						|
/* Timeout values are in seconds */
 | 
						|
#define PDC_WDT_MIN_TIMEOUT		1
 | 
						|
#define PDC_WDT_DEF_TIMEOUT		64
 | 
						|
 | 
						|
static int heartbeat;
 | 
						|
module_param(heartbeat, int, 0);
 | 
						|
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds "
 | 
						|
	"(default=" __MODULE_STRING(PDC_WDT_DEF_TIMEOUT) ")");
 | 
						|
 | 
						|
static bool nowayout = WATCHDOG_NOWAYOUT;
 | 
						|
module_param(nowayout, bool, 0);
 | 
						|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
 | 
						|
	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 | 
						|
 | 
						|
struct pdc_wdt_dev {
 | 
						|
	struct watchdog_device wdt_dev;
 | 
						|
	struct clk *wdt_clk;
 | 
						|
	struct clk *sys_clk;
 | 
						|
	void __iomem *base;
 | 
						|
};
 | 
						|
 | 
						|
static int pdc_wdt_keepalive(struct watchdog_device *wdt_dev)
 | 
						|
{
 | 
						|
	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
 | 
						|
 | 
						|
	writel(PDC_WDT_TICKLE1_MAGIC, wdt->base + PDC_WDT_TICKLE1);
 | 
						|
	writel(PDC_WDT_TICKLE2_MAGIC, wdt->base + PDC_WDT_TICKLE2);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int pdc_wdt_stop(struct watchdog_device *wdt_dev)
 | 
						|
{
 | 
						|
	unsigned int val;
 | 
						|
	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
 | 
						|
 | 
						|
	val = readl(wdt->base + PDC_WDT_CONFIG);
 | 
						|
	val &= ~PDC_WDT_CONFIG_ENABLE;
 | 
						|
	writel(val, wdt->base + PDC_WDT_CONFIG);
 | 
						|
 | 
						|
	/* Must tickle to finish the stop */
 | 
						|
	pdc_wdt_keepalive(wdt_dev);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void __pdc_wdt_set_timeout(struct pdc_wdt_dev *wdt)
 | 
						|
{
 | 
						|
	unsigned long clk_rate = clk_get_rate(wdt->wdt_clk);
 | 
						|
	unsigned int val;
 | 
						|
 | 
						|
	val = readl(wdt->base + PDC_WDT_CONFIG) & ~PDC_WDT_CONFIG_DELAY_MASK;
 | 
						|
	val |= order_base_2(wdt->wdt_dev.timeout * clk_rate) - 1;
 | 
						|
	writel(val, wdt->base + PDC_WDT_CONFIG);
 | 
						|
}
 | 
						|
 | 
						|
static int pdc_wdt_set_timeout(struct watchdog_device *wdt_dev,
 | 
						|
			       unsigned int new_timeout)
 | 
						|
{
 | 
						|
	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
 | 
						|
 | 
						|
	wdt->wdt_dev.timeout = new_timeout;
 | 
						|
 | 
						|
	__pdc_wdt_set_timeout(wdt);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/* Start the watchdog timer (delay should already be set) */
 | 
						|
static int pdc_wdt_start(struct watchdog_device *wdt_dev)
 | 
						|
{
 | 
						|
	unsigned int val;
 | 
						|
	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
 | 
						|
 | 
						|
	__pdc_wdt_set_timeout(wdt);
 | 
						|
 | 
						|
	val = readl(wdt->base + PDC_WDT_CONFIG);
 | 
						|
	val |= PDC_WDT_CONFIG_ENABLE;
 | 
						|
	writel(val, wdt->base + PDC_WDT_CONFIG);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int pdc_wdt_restart(struct watchdog_device *wdt_dev,
 | 
						|
			   unsigned long action, void *data)
 | 
						|
{
 | 
						|
	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
 | 
						|
 | 
						|
	/* Assert SOFT_RESET */
 | 
						|
	writel(0x1, wdt->base + PDC_WDT_SOFT_RESET);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct watchdog_info pdc_wdt_info = {
 | 
						|
	.identity	= "IMG PDC Watchdog",
 | 
						|
	.options	= WDIOF_SETTIMEOUT |
 | 
						|
			  WDIOF_KEEPALIVEPING |
 | 
						|
			  WDIOF_MAGICCLOSE,
 | 
						|
};
 | 
						|
 | 
						|
static const struct watchdog_ops pdc_wdt_ops = {
 | 
						|
	.owner		= THIS_MODULE,
 | 
						|
	.start		= pdc_wdt_start,
 | 
						|
	.stop		= pdc_wdt_stop,
 | 
						|
	.ping		= pdc_wdt_keepalive,
 | 
						|
	.set_timeout	= pdc_wdt_set_timeout,
 | 
						|
	.restart        = pdc_wdt_restart,
 | 
						|
};
 | 
						|
 | 
						|
static int pdc_wdt_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	u64 div;
 | 
						|
	int ret, val;
 | 
						|
	unsigned long clk_rate;
 | 
						|
	struct resource *res;
 | 
						|
	struct pdc_wdt_dev *pdc_wdt;
 | 
						|
 | 
						|
	pdc_wdt = devm_kzalloc(&pdev->dev, sizeof(*pdc_wdt), GFP_KERNEL);
 | 
						|
	if (!pdc_wdt)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | 
						|
	pdc_wdt->base = devm_ioremap_resource(&pdev->dev, res);
 | 
						|
	if (IS_ERR(pdc_wdt->base))
 | 
						|
		return PTR_ERR(pdc_wdt->base);
 | 
						|
 | 
						|
	pdc_wdt->sys_clk = devm_clk_get(&pdev->dev, "sys");
 | 
						|
	if (IS_ERR(pdc_wdt->sys_clk)) {
 | 
						|
		dev_err(&pdev->dev, "failed to get the sys clock\n");
 | 
						|
		return PTR_ERR(pdc_wdt->sys_clk);
 | 
						|
	}
 | 
						|
 | 
						|
	pdc_wdt->wdt_clk = devm_clk_get(&pdev->dev, "wdt");
 | 
						|
	if (IS_ERR(pdc_wdt->wdt_clk)) {
 | 
						|
		dev_err(&pdev->dev, "failed to get the wdt clock\n");
 | 
						|
		return PTR_ERR(pdc_wdt->wdt_clk);
 | 
						|
	}
 | 
						|
 | 
						|
	ret = clk_prepare_enable(pdc_wdt->sys_clk);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&pdev->dev, "could not prepare or enable sys clock\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = clk_prepare_enable(pdc_wdt->wdt_clk);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&pdev->dev, "could not prepare or enable wdt clock\n");
 | 
						|
		goto disable_sys_clk;
 | 
						|
	}
 | 
						|
 | 
						|
	/* We use the clock rate to calculate the max timeout */
 | 
						|
	clk_rate = clk_get_rate(pdc_wdt->wdt_clk);
 | 
						|
	if (clk_rate == 0) {
 | 
						|
		dev_err(&pdev->dev, "failed to get clock rate\n");
 | 
						|
		ret = -EINVAL;
 | 
						|
		goto disable_wdt_clk;
 | 
						|
	}
 | 
						|
 | 
						|
	if (order_base_2(clk_rate) > PDC_WDT_CONFIG_DELAY_MASK + 1) {
 | 
						|
		dev_err(&pdev->dev, "invalid clock rate\n");
 | 
						|
		ret = -EINVAL;
 | 
						|
		goto disable_wdt_clk;
 | 
						|
	}
 | 
						|
 | 
						|
	if (order_base_2(clk_rate) == 0)
 | 
						|
		pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT + 1;
 | 
						|
	else
 | 
						|
		pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT;
 | 
						|
 | 
						|
	pdc_wdt->wdt_dev.info = &pdc_wdt_info;
 | 
						|
	pdc_wdt->wdt_dev.ops = &pdc_wdt_ops;
 | 
						|
 | 
						|
	div = 1ULL << (PDC_WDT_CONFIG_DELAY_MASK + 1);
 | 
						|
	do_div(div, clk_rate);
 | 
						|
	pdc_wdt->wdt_dev.max_timeout = div;
 | 
						|
	pdc_wdt->wdt_dev.timeout = PDC_WDT_DEF_TIMEOUT;
 | 
						|
	pdc_wdt->wdt_dev.parent = &pdev->dev;
 | 
						|
	watchdog_set_drvdata(&pdc_wdt->wdt_dev, pdc_wdt);
 | 
						|
 | 
						|
	watchdog_init_timeout(&pdc_wdt->wdt_dev, heartbeat, &pdev->dev);
 | 
						|
 | 
						|
	pdc_wdt_stop(&pdc_wdt->wdt_dev);
 | 
						|
 | 
						|
	/* Find what caused the last reset */
 | 
						|
	val = readl(pdc_wdt->base + PDC_WDT_TICKLE1);
 | 
						|
	val = (val & PDC_WDT_TICKLE_STATUS_MASK) >> PDC_WDT_TICKLE_STATUS_SHIFT;
 | 
						|
	switch (val) {
 | 
						|
	case PDC_WDT_TICKLE_STATUS_TICKLE:
 | 
						|
	case PDC_WDT_TICKLE_STATUS_TIMEOUT:
 | 
						|
		pdc_wdt->wdt_dev.bootstatus |= WDIOF_CARDRESET;
 | 
						|
		dev_info(&pdev->dev,
 | 
						|
			 "watchdog module last reset due to timeout\n");
 | 
						|
		break;
 | 
						|
	case PDC_WDT_TICKLE_STATUS_HRESET:
 | 
						|
		dev_info(&pdev->dev,
 | 
						|
			 "watchdog module last reset due to hard reset\n");
 | 
						|
		break;
 | 
						|
	case PDC_WDT_TICKLE_STATUS_SRESET:
 | 
						|
		dev_info(&pdev->dev,
 | 
						|
			 "watchdog module last reset due to soft reset\n");
 | 
						|
		break;
 | 
						|
	case PDC_WDT_TICKLE_STATUS_USER:
 | 
						|
		dev_info(&pdev->dev,
 | 
						|
			 "watchdog module last reset due to user reset\n");
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		dev_info(&pdev->dev,
 | 
						|
			 "contains an illegal status code (%08x)\n", val);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	watchdog_set_nowayout(&pdc_wdt->wdt_dev, nowayout);
 | 
						|
	watchdog_set_restart_priority(&pdc_wdt->wdt_dev, 128);
 | 
						|
 | 
						|
	platform_set_drvdata(pdev, pdc_wdt);
 | 
						|
 | 
						|
	ret = watchdog_register_device(&pdc_wdt->wdt_dev);
 | 
						|
	if (ret)
 | 
						|
		goto disable_wdt_clk;
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
disable_wdt_clk:
 | 
						|
	clk_disable_unprepare(pdc_wdt->wdt_clk);
 | 
						|
disable_sys_clk:
 | 
						|
	clk_disable_unprepare(pdc_wdt->sys_clk);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void pdc_wdt_shutdown(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev);
 | 
						|
 | 
						|
	pdc_wdt_stop(&pdc_wdt->wdt_dev);
 | 
						|
}
 | 
						|
 | 
						|
static int pdc_wdt_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev);
 | 
						|
 | 
						|
	pdc_wdt_stop(&pdc_wdt->wdt_dev);
 | 
						|
	watchdog_unregister_device(&pdc_wdt->wdt_dev);
 | 
						|
	clk_disable_unprepare(pdc_wdt->wdt_clk);
 | 
						|
	clk_disable_unprepare(pdc_wdt->sys_clk);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct of_device_id pdc_wdt_match[] = {
 | 
						|
	{ .compatible = "img,pdc-wdt" },
 | 
						|
	{}
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, pdc_wdt_match);
 | 
						|
 | 
						|
static struct platform_driver pdc_wdt_driver = {
 | 
						|
	.driver = {
 | 
						|
		.name = "imgpdc-wdt",
 | 
						|
		.of_match_table	= pdc_wdt_match,
 | 
						|
	},
 | 
						|
	.probe = pdc_wdt_probe,
 | 
						|
	.remove = pdc_wdt_remove,
 | 
						|
	.shutdown = pdc_wdt_shutdown,
 | 
						|
};
 | 
						|
module_platform_driver(pdc_wdt_driver);
 | 
						|
 | 
						|
MODULE_AUTHOR("Jude Abraham <Jude.Abraham@imgtec.com>");
 | 
						|
MODULE_AUTHOR("Naidu Tellapati <Naidu.Tellapati@imgtec.com>");
 | 
						|
MODULE_DESCRIPTION("Imagination Technologies PDC Watchdog Timer Driver");
 | 
						|
MODULE_LICENSE("GPL v2");
 |