241 lines
		
	
	
		
			5.0 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			241 lines
		
	
	
		
			5.0 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0+
 | |
| /*
 | |
|  * (C) Copyright 2016 Rockchip Electronics Co., Ltd
 | |
|  */
 | |
| 
 | |
| /dts-v1/;
 | |
| #include "rk3328.dtsi"
 | |
| 
 | |
| / {
 | |
| 	model = "Rockchip RK3328 EVB";
 | |
| 	compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
 | |
| 
 | |
| 	chosen {
 | |
| 		stdout-path = &uart2;
 | |
| 	};
 | |
| 
 | |
| 	gmac_clkin: external-gmac-clock {
 | |
| 		compatible = "fixed-clock";
 | |
| 		clock-frequency = <125000000>;
 | |
| 		clock-output-names = "gmac_clkin";
 | |
| 		#clock-cells = <0>;
 | |
| 	};
 | |
| 
 | |
| 	vcc3v3_sdmmc: sdmmc-pwren {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		regulator-name = "vcc3v3";
 | |
| 		gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
 | |
| 		regulator-always-on;
 | |
| 		regulator-boot-on;
 | |
| 	};
 | |
| 
 | |
| 	vcc5v0_otg: vcc5v0-otg-drv {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		enable-active-high;
 | |
| 		regulator-name = "vcc5v0_otg";
 | |
| 		gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>;
 | |
| 		regulator-min-microvolt = <5000000>;
 | |
| 		regulator-max-microvolt = <5000000>;
 | |
| 	};
 | |
| 
 | |
| 	vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		enable-active-high;
 | |
| 		regulator-name = "vcc5v0_host_xhci";
 | |
| 		gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
 | |
| 		regulator-min-microvolt = <5000000>;
 | |
| 		regulator-max-microvolt = <5000000>;
 | |
| 	};
 | |
| 
 | |
| 	vcc_phy: vcc-phy-regulator {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		regulator-name = "vcc_phy";
 | |
| 		regulator-always-on;
 | |
| 		regulator-boot-on;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &saradc {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &uart2 {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &sdmmc {
 | |
| 	bus-width = <4>;
 | |
| 	cap-mmc-highspeed;
 | |
| 	cap-sd-highspeed;
 | |
| 	card-detect-delay = <200>;
 | |
| 	disable-wp;
 | |
| 	num-slots = <1>;
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &emmc {
 | |
| 	bus-width = <8>;
 | |
| 	cap-mmc-highspeed;
 | |
| 	supports-emmc;
 | |
| 	disable-wp;
 | |
| 	non-removable;
 | |
| 	num-slots = <1>;
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &gmac2io {
 | |
| 	phy-supply = <&vcc_phy>;
 | |
| 	phy-mode = "rgmii";
 | |
| 	clock_in_out = "input";
 | |
| 	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
 | |
| 	snps,reset-active-low;
 | |
| 	snps,reset-delays-us = <0 10000 50000>;
 | |
| 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 | |
| 	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&rgmiim1_pins>;
 | |
| 	tx_delay = <0x26>;
 | |
| 	rx_delay = <0x11>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &usb_host0_ehci {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &usb_host0_ohci {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &usb20_otg {
 | |
| 	vbus-supply = <&vcc5v0_otg>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &usb_host0_xhci {
 | |
| 	vbus-supply = <&vcc5v0_host_xhci>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &i2c1 {
 | |
| 	clock-frequency = <400000>;
 | |
| 	i2c-scl-rising-time-ns = <168>;
 | |
| 	i2c-scl-falling-time-ns = <4>;
 | |
| 	status = "okay";
 | |
| 
 | |
| 	rk805: pmic@18 {
 | |
| 		compatible = "rockchip,rk805";
 | |
| 		status = "okay";
 | |
| 		reg = <0x18>;
 | |
| 		interrupt-parent = <&gpio2>;
 | |
| 		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 | |
| 		pinctrl-names = "default";
 | |
| 		pinctrl-0 = <&pmic_int_l>;
 | |
| 		rockchip,system-power-controller;
 | |
| 		wakeup-source;
 | |
| 		gpio-controller;
 | |
| 		#gpio-cells = <2>;
 | |
| 		#clock-cells = <1>;
 | |
| 		clock-output-names = "xin32k", "rk805-clkout2";
 | |
| 
 | |
| 		regulators {
 | |
| 			vdd_logic: DCDC_REG1 {
 | |
| 				regulator-name = "vdd_logic";
 | |
| 				regulator-min-microvolt = <712500>;
 | |
| 				regulator-max-microvolt = <1450000>;
 | |
| 				regulator-ramp-delay = <6001>;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <1000000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vdd_arm: DCDC_REG2 {
 | |
| 				regulator-name = "vdd_arm";
 | |
| 				regulator-min-microvolt = <712500>;
 | |
| 				regulator-max-microvolt = <1450000>;
 | |
| 				regulator-ramp-delay = <6001>;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <1000000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vcc_ddr: DCDC_REG3 {
 | |
| 				regulator-name = "vcc_ddr";
 | |
| 				regulator-boot-on;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vcc_io: DCDC_REG4 {
 | |
| 				regulator-name = "vcc_io";
 | |
| 				regulator-min-microvolt = <3300000>;
 | |
| 				regulator-max-microvolt = <3300000>;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <3300000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vdd_18: LDO_REG1 {
 | |
| 				regulator-name = "vdd_18";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <1800000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vcc_18emmc: LDO_REG2 {
 | |
| 				regulator-name = "vcc_18emmc";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <1800000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vdd_10: LDO_REG3 {
 | |
| 				regulator-name = "vdd_10";
 | |
| 				regulator-min-microvolt = <1000000>;
 | |
| 				regulator-max-microvolt = <1000000>;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <1000000>;
 | |
| 				};
 | |
| 			};
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &pinctrl {
 | |
| 	pmic {
 | |
| 		pmic_int_l: pmic-int-l {
 | |
| 		rockchip,pins =
 | |
| 			<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;	/* gpio2_a6 */
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | 
