116 lines
3.0 KiB
C
116 lines
3.0 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* ARM Cortex M3/M4/M7 SysTick timer driver
|
|
* (C) Copyright 2017 Renesas Electronics Europe Ltd
|
|
*
|
|
* Based on arch/arm/mach-stm32/stm32f1/timer.c
|
|
* (C) Copyright 2015
|
|
* Kamil Lulko, <kamil.lulko@gmail.com>
|
|
*
|
|
* Copyright 2015 ATS Advanced Telematics Systems GmbH
|
|
* Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
|
|
*
|
|
* The SysTick timer is a 24-bit count down timer. The clock can be either the
|
|
* CPU clock or a reference clock. Since the timer will wrap around very quickly
|
|
* when using the CPU clock, and we do not handle the timer interrupts, it is
|
|
* expected that this driver is only ever used with a slow reference clock.
|
|
*
|
|
* The number of reference clock ticks that correspond to 10ms is normally
|
|
* defined in the SysTick Calibration register's TENMS field. However, on some
|
|
* devices this is wrong, so this driver allows the clock rate to be defined
|
|
* using CONFIG_SYS_HZ_CLOCK.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* SysTick Base Address - fixed for all Cortex M3, M4 and M7 devices */
|
|
#define SYSTICK_BASE 0xE000E010
|
|
|
|
struct cm3_systick {
|
|
uint32_t ctrl;
|
|
uint32_t reload_val;
|
|
uint32_t current_val;
|
|
uint32_t calibration;
|
|
};
|
|
|
|
#define TIMER_MAX_VAL 0x00FFFFFF
|
|
#define SYSTICK_CTRL_EN BIT(0)
|
|
/* Clock source: 0 = Ref clock, 1 = CPU clock */
|
|
#define SYSTICK_CTRL_CPU_CLK BIT(2)
|
|
#define SYSTICK_CAL_NOREF BIT(31)
|
|
#define SYSTICK_CAL_SKEW BIT(30)
|
|
#define SYSTICK_CAL_TENMS_MASK 0x00FFFFFF
|
|
|
|
/* read the 24-bit timer */
|
|
static ulong read_timer(void)
|
|
{
|
|
struct cm3_systick *systick = (struct cm3_systick *)SYSTICK_BASE;
|
|
|
|
/* The timer counts down, therefore convert to an incrementing timer */
|
|
return TIMER_MAX_VAL - readl(&systick->current_val);
|
|
}
|
|
|
|
int timer_init(void)
|
|
{
|
|
struct cm3_systick *systick = (struct cm3_systick *)SYSTICK_BASE;
|
|
u32 cal;
|
|
|
|
writel(TIMER_MAX_VAL, &systick->reload_val);
|
|
/* Any write to current_val reg clears it to 0 */
|
|
writel(0, &systick->current_val);
|
|
|
|
cal = readl(&systick->calibration);
|
|
if (cal & SYSTICK_CAL_NOREF)
|
|
/* Use CPU clock, no interrupts */
|
|
writel(SYSTICK_CTRL_EN | SYSTICK_CTRL_CPU_CLK, &systick->ctrl);
|
|
else
|
|
/* Use external clock, no interrupts */
|
|
writel(SYSTICK_CTRL_EN, &systick->ctrl);
|
|
|
|
/*
|
|
* If the TENMS field is inexact or wrong, specify the clock rate using
|
|
* CONFIG_SYS_HZ_CLOCK.
|
|
*/
|
|
#if defined(CONFIG_SYS_HZ_CLOCK)
|
|
gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK;
|
|
#else
|
|
gd->arch.timer_rate_hz = (cal & SYSTICK_CAL_TENMS_MASK) * 100;
|
|
#endif
|
|
|
|
gd->arch.tbl = 0;
|
|
gd->arch.tbu = 0;
|
|
gd->arch.lastinc = read_timer();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* return milli-seconds timer value */
|
|
ulong get_timer(ulong base)
|
|
{
|
|
unsigned long long t = get_ticks() * 1000;
|
|
|
|
return (ulong)((t / gd->arch.timer_rate_hz)) - base;
|
|
}
|
|
|
|
unsigned long long get_ticks(void)
|
|
{
|
|
u32 now = read_timer();
|
|
|
|
if (now >= gd->arch.lastinc)
|
|
gd->arch.tbl += (now - gd->arch.lastinc);
|
|
else
|
|
gd->arch.tbl += (TIMER_MAX_VAL - gd->arch.lastinc) + now;
|
|
|
|
gd->arch.lastinc = now;
|
|
|
|
return gd->arch.tbl;
|
|
}
|
|
|
|
ulong get_tbclk(void)
|
|
{
|
|
return gd->arch.timer_rate_hz;
|
|
}
|