payton/nt9856x
Template
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
19307baf27
nt9856x/code/hdal/drivers/k_driver/include/rtos_na51089/dsi.h
payton 543d2da268 1.一次S530代码提交
2023-03-28 15:07:53 +08:00

538 lines
19 KiB
C
Executable File
Raw Blame History

/**
MIPI-DSI Controller global header
MIPI-DSI Controller global header
@file dsi.h
@ingroup mIDrvDisp_DSI
@note Nothing
Copyright Novatek Microelectronics Corp. 2011. All rights reserved.
*/
#ifndef __DSI_H__
#define __DSI_H__
#ifdef __KERNEL__
#include "kwrap/type.h"
#endif
#if defined(_NVT_FPGA_)
//#define _TC680_ 1
#define _TC18039_ 1
#endif
#define EFUS_DSI_SUPPORT 1
/**
@addtogroup mIDrvDisp_DSI
*/
//@{
/**
@name Host to peripheral packet data types
*/
//@{
#define DATA_TYPE_SHORT_READ_NO_PARAM 0x06 ///< packet size short, no parameter.
#define DATA_TYPE_GENERIC_SHORT_READ_2_PARAM 0x24 ///< By manufacturer.
#define DATA_TYPE_SHORT_WRITE_NO_PARAM 0x05 ///< Short packet write packet size short, no parameter.
#define DATA_TYPE_SHORT_WRITE_1_PARAM 0x15 ///< Short packet write packet size short, 1 parameter.
#define DATA_TYPE_SET_MAX_RT_PKT_SIZE 0x37 ///< Set Max. return packet size.
#define DATA_TYPE_LONG_WRITE 0x39 ///< Long packet write.
#define DATA_TYPE_PACKET_STREAM_RGB_565_PACKED 0x0E ///< Packet stream RGB 565 packed.
#define DATA_TYPE_PACKET_STREAM_RGB_666_PACKED 0x1E ///< Packet stream RGB 666 packed.
#define DATA_TYPE_PACKET_STREAM_RGB_666_LOOSELY 0x2E ///< Packet stream RGB 666 loosely.
#define DATA_TYPE_PACKET_STREAM_RGB_888_PACKED 0x3E ///< Packet stream RGB 888 packed.
//@}
/**
@name Ultra low power state entry command pattern
@note for dsi_set_escape_entry()
*/
//@{
#define ULPS_ENTRY_CMD_LPDT 0x87 ///< Low power data transmission
#define ULPS_ENTRY_CMD_ULPS 0x78 ///< Enter ultra Low power state
#define ULPS_ENTRY_CMD_RESET 0x46 ///< reset trigger
#define ULPS_ENTRY_CMD_TE 0xBA ///< Tearing effect
#define ULPS_ENTRY_CMD_ACK 0x12 ///< Ack
//@}
/**
@name Display command Set (DCS)
*/
//@{
#define DCS_CMD_SW_RESET 0x01 ///< Power for the display panel is on.
#define DCS_CMD_EXIT_SLEEP_MODE 0x11 ///< Power for the display panel is on.
#define DCS_CMD_SET_DISPLAY_ON 0x29 ///< Show the image on the display device.
#define DCS_CMD_SET_ALL_PIX_ON 0x23 ///< Set all pixel on.
#define DCS_CMD_SET_ALL_PIX_OFF 0x22 ///< Set all pixel off.
#define DCS_CMD_MEMORY_ACCESS_CTRL 0x36 ///< Show the image on the display device.
#define DCS_CMD_MEMORY_WRITE 0x2C ///< memory write.
#define DCS_CMD_MEMORY_WRITE_CONT 0x3C ///< memory write continue.
#define DCS_CMD_COLUMN_ADDR_SET 0x2A ///< set column address
#define DCS_CMD_GAMMA_SET 0x26 ///< set gamma
#define DCS_CMD_NULL_PKT 0x09 ///< set null packet
#define DCS_CMD_READ_ID0 0x04 ///< read id0
#define DCS_CMD_READ_PWR_MODE 0x0A ///< read power mode
#define DCS_CMD_READ_ID1 0xDA ///< read id1
#define DCS_CMD_READ_ID2 0xDB ///< read id2
#define DCS_CMD_READ_ID3 0xDC ///< read id3
#define DCS_CMD_READ_STATUS 0xF2 ///< read status
#define DCS_CMD_SET_TE_OFF 0x34 ///< set TE off
#define DCS_CMD_SET_TE_ON 0x35 ///< set TE on
//@}
/**
DSI mode select
@note for dsi_set_config()
*/
typedef enum {
DSI_MODE_MANUAL_MODE = 0, ///< Manual Commands Only: Send CMD(s) and auto clear DSI_TX_EN
DSI_MODE_AUTO_MODE1, ///< Send single frame only and auto clear DSI_TX_EN at frame end (No commands)
DSI_MODE_AUTO_MODE2, ///< Auto Mode 2: FRM1 + FRM2 + ...
DSI_MODE_AUTO_MODE3, ///< Auto Mode 3: CMD(s) + FRM1 + CMD(s) + FRM2 + ...
DSI_MODE_CNT,
ENUM_DUMMY4WORD(DSI_MODESEL)
} DSI_MODESEL;
/**
DSI pixel format select
@note for dsi_set_config()
*/
typedef enum {
DSI_PIXEL_RGB_565 = 0, ///< 16 bits / pixel
DSI_PIXEL_RGB_666_PACKETED, ///< 18 bits / pixel, size should multiple of 9 bytes
DSI_PIXEL_RGB_666_LOOSELY, ///< 18 bits / pixel, size should multiple of 3 bytes
DSI_PIXEL_RGB_888, ///< 24 bits / pixel
DSI_PIXEL_FMT_CNT,
ENUM_DUMMY4WORD(DSI_PIXEL_FORMATSEL)
} DSI_PIXEL_FORMATSEL;
/**
DSI pixel packet mode select
@note for dsi_set_config()
*/
typedef enum {
DSI_PIXMODE_VIDEO_MODE = 0, ///< video mode (without framebuffer)
DSI_PIXMODE_COMMAND_MODE, ///< command mode (with framebuffer)
DSI_PIXMODE_CNT,
ENUM_DUMMY4WORD(DSI_PIXPKT_MODESEL)
} DSI_PIXPKT_MODESEL;
/**
DSI video packet type select
@note for dsi_set_config()
*/
typedef enum {
DSI_VIDEOPKT_TYPE_SYNC_PULSE = 0, ///< Sync pulse
DSI_VIDEOPKT_TYPE_SYNC_EVENT, ///< Sync evnet, Burst mode
ENUM_DUMMY4WORD(DSI_VIDEOPKT_TYPESEL)
} DSI_VIDEOPKT_TYPESEL;
/**
DSI Lane select
@note for dsi_set_config()
*/
typedef enum {
DSI_DATA_LANE_0 = 0, ///< Data lane 0
DSI_DATA_LANE_1, ///< Data lane 1
DSI_DATA_LANE_2, ///< Data lane 2
DSI_DATA_LANE_3, ///< Data lane 3
DSI_DATA_LANE_CNT,
ENUM_DUMMY4WORD(DSI_LANESEL)
} DSI_LANESEL;
/**
DSI CLK ULP select
@note for dsi_set_config()
*/
typedef enum {
DSI_ULP_EXIT = 0, ///< Clock lane exit ULPS
DSI_ULP_ENTER = 1, ///< Clock lane enter ULPS
DSI_ULP_SEL_CNT,
ENUM_DUMMY4WORD(DSI_ULP_SEL)
} DSI_ULP_SEL;
/**
DSI escape control operation select
@note for dsi_set_config()
*/
typedef enum {
DSI_ESCAPE_TRIGGER = 0, ///< Escape command trigger
DSI_ESCAPE_START, ///< Escape command start procedure
DSI_ESCAPE_STOP, ///< Escape command stop procedure
ENUM_DUMMY4WORD(DSI_ESC_OP)
} DSI_ESC_OP;
/**
DSI escape control operation stop action selection
@note for dsi_set_config()
*/
typedef enum {
DSI_SET_ESC_NOT_STOP = 0x0, ///< Escape command not stop
DSI_SET_ESC_STOP_WITH_ESC_CMD, ///< Escape command stop but not send exit cmd
DSI_SET_ESC_STOP_WITHOUT_ESC_CMD, ///< Escape command stopp and send exit cmd
ENUM_DUMMY4WORD(DSI_CFG_ESCAPE_CMD_STOP_TYPE)
} DSI_CFG_ESCAPE_CMD_STOP_TYPE;
/**
DSI input source
DSI input source, used for dsi_set_config(DSI_CONFIG_ID_SRC, SRC_IDE).
*/
typedef enum {
DSI_SRC_IDE = 0x0, ///< From IDE
DSI_SRC_IDE2, ///< From IDE2
ENUM_DUMMY4WORD(DSI_SRC)
} DSI_SRC;
/**
DSI chip version
@note for dsi_get_config()
*/
#define DSI_DRV_CHIPVER_A 0x0
#define DSI_DRV_CHIPVER_B 0x1
#define DSI_DRV_CHIPVER_C 0x2
/**
DSI Command control
Set DSI Command control
*/
typedef struct {
UINT32 ui_data_type; ///< data type
UINT32 ui_virtual_channel; ///< virtual channel id
UINT32 ui_packet_type; ///< packet type
UINT32 ui_dcs_cmd; ///< dcs commnd
UINT8 *ui_param; ///< point to parameter
UINT32 ui_param_cnt; ///< parmeter count
} DSI_CMD_CTRL_PARAM, *PDSI_CMD_CTRL_PARAM;
/**
DSI Command R/W control
Set DSI Command R/W control
*/
typedef struct {
UINT32 ui_cmd_no; ///< commnad number
BOOL b_bta_en; ///< BTA enable/disable
BOOL b_bta_only; ///< issue BTA only
UINT32 ui_sram_ofs; ///< set the sram offset
BOOL b_eot_en; ///< set the EOT enable or not
PDSI_CMD_CTRL_PARAM p_dsi_cmd_ctx; ///< set commnd control
} DSI_CMD_RW_CTRL_PARAM, *PDSI_CMD_RW_CTRL_PARAM;
/**
DSI Functional Configuration Selection
This definition is used in dsi_set_config()/dsi_get_config() specify which of the dsi function is selected
to assign new configurations.
*/
typedef enum {
DSI_CONFIG_ID_MODE, ///< Configure DSI mode
///< @note for DSI_CFG_MODE_SEL
///< Context can be any of:
///< - @b DSI_MODE_MANUAL_MODE : Manual Commands Only: Send CMD(s) and auto clear DSI_TX_EN
///< - @b DSI_MODE_AUTO_MODE1 : Send single frame only and auto clear DSI_TX_EN at frame end (No commands)
///< - @b DSI_MODE_AUTO_MODE2 : Auto Mode 2: FRM1 + FRM2 + ...
///< - @b DSI_MODE_AUTO_MODE3 : Auto Mode 3: CMD(s) + FRM1 + CMD(s) + FRM2 + ...
DSI_CONFIG_ID_PIXEL_FMT, ///< Configure DSI pinxel format. Use DSI_PIXEL_RGB_888/DSI_PIXEL_RGB_565/DSI_PIXEL_RGB_666_PACKETED/DSI_PIXEL_RGB_666_LOOSELY
DSI_CONFIG_ID_PIXPKT_MODE, ///< Configure DSI pinxel mode.
DSI_CONFIG_ID_VDOPKT_TYPE, ///< Configure DSI video packet type.
DSI_CONFIG_ID_ECC_CHK_EN, ///< Configure DSI Ecc check enable/disable.
DSI_CONFIG_ID_FRMEND_BTA_EN, ///< Configure DSI frameend BTA enable/disable.
DSI_CONFIG_ID_EOT_PKT_EN, ///< Configure DSI EOT packet enable/disable
DSI_CONFIG_ID_BLANK_CTRL, ///< Configure DSI blank control
DSI_CONFIG_ID_INTER_PKT_LP, ///< Configure DSI inter-packet enter LP or not.
DSI_CONFIG_ID_CLK_LP_CTRL, ///< Configure DSI clock enter LP or not.
DSI_CONFIG_ID_SYNC_EN, ///< Configure DSI sync enable/disable.
DSI_CONFIG_ID_SYNC_SRC, ///< Configure DSI sync source.
DSI_CONFIG_ID_SYNC_WITH_SETTEON, ///< Configure DSI sync with set te on.
DSI_CONFIG_ID_SYNC_WITH_SETTEON_RTY, ///< Configure DSI sync with set te on retry.
DSI_CONFIG_ID_RGB_SWAP, ///< Configure DSI RGB swap
DSI_CONFIG_ID_RGB_BITFLIP, ///< Configure DSI RGB bit swap
DSI_CONFIG_ID_SYNC_WITH_SETTEON_RTY_TWICEBTA, ///< Configure DSI sync with set te on retry and BTA twice.
DSI_CONFIG_ID_DATALANE_NO, ///< Configure DSI data lane number.
DSI_CONFIG_ID_SRC, ///< Configure DSI souce from IDE or IDE2
DSI_CONFIG_ID_PIXPKT_PH_DT, ///< Configure DSI pixel Packet header DataType.
DSI_CONFIG_ID_PIXPKT_PH_VC, ///< Configure DSI pixel Packet header VirtualChannel.
DSI_CONFIG_ID_DCS_CT0, ///< Configure DSI DSC command, this field would be inserted in front of the first pixel packet.
DSI_CONFIG_ID_DCS_CT1, ///< Configure DSI DSC command, this field would be inserted in front of the pixel packet except the first pixel packet.
DSI_CONFIG_ID_SYNCEVT_SLICE_NO, ///< Configure DSI sync event slice number.
DSI_CONFIG_ID_SYNCEVT_NULL_LEN, ///< Configure DSI sync even null length. (Byte count)
DSI_CONFIG_ID_VSA, ///< Configure DSI vertical sync active timing.
DSI_CONFIG_ID_VTOTAL, ///< Configure DSI vertical total timing.
DSI_CONFIG_ID_VVALID_START, ///< Configure DSI vertical valid start timing.
DSI_CONFIG_ID_VVALID_END, ///< Configure DSI vertical valid end timing.
DSI_CONFIG_ID_HSA, ///< Configure DSI horizontal sync active timing.
DSI_CONFIG_ID_BLLP, ///< Configure DSI BLLP period, this period can trasmit HS packets or entering LP11.
DSI_CONFIG_ID_HBP, ///< Configure DSI horizontal back porch period.
DSI_CONFIG_ID_HFP, ///< Configure DSI horizontal front porch period.
DSI_CONFIG_ID_HACT, ///< Configure DSI horizontal active period.
DSI_CONFIG_ID_TLPX, ///< Configure DSI LTPX timing.
DSI_CONFIG_ID_BTA_TA_GO, ///< Configure DSI TA_GO timing.
DSI_CONFIG_ID_BTA_TA_SURE, ///< Configure DSI TA_SURE timing.
DSI_CONFIG_ID_BTA_TA_GET, ///< Configure DSI TA_GET timing.
DSI_CONFIG_ID_THS_PREPARE, ///< Configure DSI THS_PREPARE timing.
DSI_CONFIG_ID_THS_ZERO, ///< Configure DSI THS_ZERO timing.
DSI_CONFIG_ID_THS_TRAIL, ///< Configure DSI THS_TRAIL timing.
DSI_CONFIG_ID_THS_EXIT, ///< Configure DSI THS_EXIT timing.
DSI_CONFIG_ID_TWAKEUP, ///< Configure DSI wakeup timing.
DSI_CONFIG_ID_TCLK_PREPARE, ///< Configure DSI TCLK_PREPARE timing.
DSI_CONFIG_ID_TCLK_ZERO, ///< Configure DSI TCLK_ZERO timing.
DSI_CONFIG_ID_TCLK_POST, ///< Configure DSI TCLK_POST timing.
DSI_CONFIG_ID_TCLK_PRE, ///< Configure DSI TCLK_PRE timing.
DSI_CONFIG_ID_TCLK_TRAIL, ///< Configure DSI TCLK_TRAIL timing.
DSI_CONFIG_ID_BTA_TMOUT_VAL, ///< Configure DSI BTA timeout.
DSI_CONFIG_ID_BTA_HANDSK_TMOUT_VAL, ///< Configure DSI BTA handshake timeout.
DSI_CONFIG_ID_SYNC_POL, ///< Configure DSI SYNC polarity.
DSI_CONFIG_ID_SYNC_SEL, ///< Configure DSI SYNC faster or slower than peripheral selection.
DSI_CONFIG_ID_SYNC_DLY_CNT, ///< Configure DSI SYNC delay count.
DSI_CONFIG_ID_TE_BTA_INTERVAL, ///< Configure DSI TE BAT issue interval.
DSI_CONFIG_ID_PHY_DRVING, ///< Configure DSI PHY driving
DSI_CONFIG_ID_CLK_PHASE_OFS, ///< Configure DSI PHY clock phase offset.
DSI_CONFIG_ID_DAT0_PHASE_OFS, ///< Configure DSI PHY data0 phase offset.
DSI_CONFIG_ID_DAT1_PHASE_OFS, ///< Configure DSI PHY data1 phase offset.
DSI_CONFIG_ID_DAT2_PHASE_OFS, ///< Configure DSI PHY data2 phase offset.
DSI_CONFIG_ID_DAT3_PHASE_OFS, ///< Configure DSI PHY data3 phase offset.
DSI_CONFIG_ID_PHASE_DELAY_ENABLE_OFS, ///< Configure DSI PHY phase delay enable.
//DSI_CFG_ID_FREQ
DSI_CONFIG_ID_FREQ, ///< DSI module target clock (Unit: Hz)
DSI_CONFIG_ID_LPFREQ, ///< DSI module LP clock (Unit: Hz)
DSI_CONFIG_ID_IDEHVALID, ///< DSI module of IDE HVALID setting
DSI_CONFIG_ID_LANSEL_D0, ///< Configure DSI DAT0 Lane mapping
DSI_CONFIG_ID_LANSEL_D1, ///< Configure DSI DAT1 Lane mapping
DSI_CONFIG_ID_LANSEL_D2, ///< Configure DSI DAT2 Lane mapping
DSI_CONFIG_ID_LANSEL_D3, ///< Configure DSI DAT3 Lane mapping
DSI_CONFIG_ID_PHY_LP_RX_DAT0,///< Configure DSI LP RX DAT0 enable/disable
DSI_CONFIG_ID_BTA_VALUE, ///< Read back SRAM value
DSI_CONFIG_ID_CHIP_VER, ///< Get DSI chip version
ENUM_DUMMY4WORD(DSI_CONFIG_ID)
} DSI_CONFIG_ID;
#if 0
typedef enum {
DSI_CFG_MODE_CMD_ONLY,
DSI_CFG_MODE_SINGLE_FRM,
DSI_CFG_MODE_MULTI_FRM,
DSI_CFG_MODE_MULTI_CMD_FRM,
ENUM_DUMMY4WORD(DSI_CFG_MODE_SEL)
} DSI_CFG_MODE_SEL;
typedef enum {
DSI_CFG_PIXEL_FMT_RGB565,
DSI_CFG_PIXEL_FMT_RGB666_PACKED,
DSI_CFG_PIXEL_FMT_RGB666_LOOSELY,
DSI_CFG_PIXEL_FMT_RGB888,
ENUM_DUMMY4WORD(DSI_CFG_PIXEL_FMT_SEL)
} DSI_CFG_PIXEL_FMT_SEL;
typedef enum {
DSI_CFG_PIXPKT_VIDEO_MODE,
DSI_CFG_PIXPKT_COMMAND_MODE,
ENUM_DUMMY4WORD(DSI_CFG_PIXPKT_MODE_SEL)
} DSI_CFG_PIXPKT_MODE_SEL;
typedef enum {
DSI_CFG_VDOPKT_SYNCPULSE_TYPE,
DSI_CFG_VDOPKT_SYNCEVENT_TYPE,
ENUM_DUMMY4WORD(DSI_CFG_VDOPKT_TYPE_SEL)
} DSI_CFG_VDOPKT_TYPE_SEL;
#endif
// -----------------------------------------------------------------------------
// DSI Command RW control (0x2C)
// -----------------------------------------------------------------------------
/**
DSI command RW control configuration
@note for dsi_set_cmd_rw_ctrl()
*/
typedef enum {
DSI_SET_CMD_NUMBER = 0x0, ///< The number of (DSI_CMD_NUMBER+1) commands would be sent in DSI_MODE= 0/3/4.
///< Context is
///< - @b UINT32 : 1 - 8
DSI_SET_BTA_EN, ///< Enable the Bus Turn Around (BTA) process
///< after the final commands are sent.
///< The READ command should put at the final commands,
///< and the data would be read back after BTA.
///< This field is valid for DSI_MODE = 0/3/4.
///< Context is
///< - @b UINT32 : 1 : Enable
///< - @b UINT32 : 0 : Disable
DSI_SET_BTA_ONLY, ///< Context is
///< - @b UINT32 : 1 : Issue BTA only
///< - @b UINT32 : 0 : Disable
DSI_SET_SRAM_READ_OFS, ///< Context is
///< - @b UINT32 : Sram offset 0~255 (256 bytes total)
DSI_GET_SRAM_READ_CNT, ///< Context is
///< - @b UINT32*: Sram offset 0~256
DSI_RW_CMD_CTRL_CNT,
ENUM_DUMMY4WORD(DSI_CFG_CMD_RW_CTRL)
} DSI_CFG_CMD_RW_CTRL;
// -----------------------------------------------------------------------------
// DSI Command Register 0,1 (0x30,0x34)
// -----------------------------------------------------------------------------
/**
DSI packet type
@note for dsi_set_cmd_register()
*/
//@{
typedef enum {
DSI_SHORT_PACKET = 0x0, ///< This DSI short packet
DSI_LONG_PACKET, ///< This DSI long packet
DSI_PT_CNT,
ENUM_DUMMY4WORD(DSI_PACKET_TYPE)
} DSI_PACKET_TYPE;
//@}
/**
DSI command register set
@note for dsi_set_cmd_register()
*/
typedef enum {
DSI_CMD_REG0 = 0x0, ///< Command register 0
DSI_CMD_REG1, ///< Command register 1
DSI_CMD_REG2, ///< Command register 2
DSI_CMD_REG3, ///< Command register 3
DSI_CMD_REG4, ///< Command register 4
DSI_CMD_REG5, ///< Command register 5
DSI_CMD_REG6, ///< Command register 6
DSI_CMD_REG7, ///< Command register 7
DSI_CMD_SET_CNT,
ENUM_DUMMY4WORD(DSI_CMD_REG_NUM)
} DSI_CMD_REG_NUM;
/**
DSI command register configuration
@note for dsi_set_cmd_register()
*/
typedef enum {
DSI_SET_CMD_DT = 0x0, // The command n Data Type in the Data Identification (DI) field of the DSI packet header.
DSI_SET_CMD_VC, // The virtual channel ID for the command n
DSI_SET_CMD_WC, // If the command n is the Short Packet, this field is the command data for this short packet command.
// If the command n is the Long Packet, this field is the length for this long packet command.
// The long packet command data is stored in the SRAM in serially by commands. The command data n is from the SRAM address offset 0.
DSI_SET_CMD_DATA = DSI_SET_CMD_WC,
DSI_SET_CMD_PT, // The Packet Type of the command n.
// 0: Short Packet
// 1: Long Packet
ENUM_DUMMY4WORD(DSI_CFG_CMD_REG)
} DSI_CFG_CMD_REG;
#ifdef __KERNEL__
extern void dsi_create_resource(void);
extern void dsi_release_resource(void);
extern void dsi_set_base_addr(UINT32 addr);
extern void dsi_isr(void);
#endif
extern ER dsi_open(void);
extern ER dsi_close(void);
extern ER dsi_reset(void);
extern BOOL dsi_is_opened(void);
extern ER dsi_set_tx_en(BOOL b_en, BOOL b_wait);
extern ER dsi_wait_tx_done(void);
extern ER dsi_wait_tx_done_polling_mode(void);
extern ER dsi_wait_frame_end(void);
extern ER dsi_issue_bta(void);
extern ER dsi_ulps_trigger(void);
extern UINT32 dsi_get_error_report(void);
extern ER dsi_set_lps_clock_sel(DSI_ULP_SEL ulp_sel);
extern ER dsi_set_hs_dcs_command(PDSI_CMD_RW_CTRL_PARAM p_dcs_ctx);
extern ER dsi_set_hs_dcs_command_BTA(PDSI_CMD_RW_CTRL_PARAM pDcsCtx);
extern ER dsi_set_config(DSI_CONFIG_ID cfg_id, UINT32 config_value);
extern ER dsi_set_cmd_rw_ctrl(DSI_CFG_CMD_RW_CTRL cmd, UINT32 param);
extern ER dsi_set_lp_dcs_command(DSI_LANESEL data_lane, UINT32 lp_cmd);
extern ER dsi_set_escape_entry(DSI_LANESEL data_lane, UINT32 entry_cmd, BOOL b_stop);
extern ER dsi_set_escape_control(DSI_LANESEL data_lane, DSI_ESC_OP esc_op, BOOL b_en);
extern ER dsi_set_cmd_register(DSI_CMD_REG_NUM cmd_reg_no, DSI_CFG_CMD_REG cmd_reg, UINT32 param);
extern ER dsi_set_escape_transmission(DSI_LANESEL data_lane, UINT32 cmd, DSI_CFG_ESCAPE_CMD_STOP_TYPE exit);
extern BOOL dsi_get_phase_delay_info(UINT32 *p_clk_phase, UINT32 *p_d0_phase, UINT32 *p_d1_phase);
extern UINT32 dsi_get_config(DSI_CONFIG_ID cfg_id);
extern void dsi_dump_info(void);
/* dsi int*/
#if defined(__FREERTOS)
#if defined(_TC680_) && defined(_NVT_FPGA_)
extern void dsi_tc680_init(void);
extern ER dsi_tc680_writereg(UINT32 ui_offset, UINT32 ui_value);
extern ER dsi_tc680_readreg(UINT32 ui_offset, UINT32 *pui_value);
#endif
#if defined(_TC18039_) && defined(_NVT_FPGA_)
extern void dsi_tc18039_init(void);
#endif
extern ER dsi_write_phy_reg(UINT32 uiOffset, UINT32 uiValue);
extern ER dsi_read_phy_reg(UINT32 uiOffset, UINT32 *puiValue);
#endif
//@}
#endif
Reference in New Issue View Git Blame Copy Permalink