payton/nt9856x
Template
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
15a9725668
nt9856x/BSP/linux-kernel/drivers/input/misc/cm109.c
payton 543d2da268 1.一次S530代码提交
2023-03-28 15:07:53 +08:00

954 lines
24 KiB
C
Raw Blame History

/*
* Driver for the VoIP USB phones with CM109 chipsets.
*
* Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*/
/*
* Tested devices:
* - Komunikate KIP1000
* - Genius G-talk
* - Allied-Telesis Corega USBPH01
* - ...
*
* This driver is based on the yealink.c driver
*
* Thanks to:
* - Authors of yealink.c
* - Thomas Reitmayr
* - Oliver Neukum for good review comments and code
* - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap
* - Dmitry Torokhov for valuable input and review
*
* Todo:
* - Read/write EEPROM
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/rwsem.h>
#include <linux/usb/input.h>
#define DRIVER_VERSION "20080805"
#define DRIVER_AUTHOR "Alfred E. Heggestad"
#define DRIVER_DESC "CM109 phone driver"
static char *phone = "kip1000";
module_param(phone, charp, S_IRUSR);
MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
enum {
/* HID Registers */
HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */
HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */
HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */
HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */
HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */
HID_OR1 = 0x01, /* GPO - General Purpose Output */
HID_OR2 = 0x02, /* Set GPIO to input/output mode */
HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */
/* HID_IR0 */
RECORD_MUTE = 1 << 3,
PLAYBACK_MUTE = 1 << 2,
VOLUME_DOWN = 1 << 1,
VOLUME_UP = 1 << 0,
/* HID_OR0 */
/* bits 7-6
0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer
and SPDIF
1: HID_OR0-3 are used as generic HID registers
2: Values written to HID_OR0-3 are also mapped to MCU_CTRL,
EEPROM_DATA0-1, EEPROM_CTRL (see Note)
3: Reserved
*/
HID_OR_GPO_BUZ_SPDIF = 0 << 6,
HID_OR_GENERIC_HID_REG = 1 << 6,
HID_OR_MAP_MCU_EEPROM = 2 << 6,
BUZZER_ON = 1 << 5,
/* up to 256 normal keys, up to 15 special key combinations */
KEYMAP_SIZE = 256 + 15,
};
/* CM109 protocol packet */
struct cm109_ctl_packet {
u8 byte[4];
} __attribute__ ((packed));
enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) };
/* CM109 device structure */
struct cm109_dev {
struct input_dev *idev; /* input device */
struct usb_device *udev; /* usb device */
struct usb_interface *intf;
/* irq input channel */
struct cm109_ctl_packet *irq_data;
dma_addr_t irq_dma;
struct urb *urb_irq;
/* control output channel */
struct cm109_ctl_packet *ctl_data;
dma_addr_t ctl_dma;
struct usb_ctrlrequest *ctl_req;
struct urb *urb_ctl;
/*
* The 3 bitfields below are protected by ctl_submit_lock.
* They have to be separate since they are accessed from IRQ
* context.
*/
unsigned irq_urb_pending:1; /* irq_urb is in flight */
unsigned ctl_urb_pending:1; /* ctl_urb is in flight */
unsigned buzzer_pending:1; /* need to issue buzz command */
spinlock_t ctl_submit_lock;
unsigned char buzzer_state; /* on/off */
/* flags */
unsigned open:1;
unsigned resetting:1;
unsigned shutdown:1;
/* This mutex protects writes to the above flags */
struct mutex pm_mutex;
unsigned short keymap[KEYMAP_SIZE];
char phys[64]; /* physical device path */
int key_code; /* last reported key */
int keybit; /* 0=new scan 1,2,4,8=scan columns */
u8 gpi; /* Cached value of GPI (high nibble) */
};
/******************************************************************************
* CM109 key interface
*****************************************************************************/
static unsigned short special_keymap(int code)
{
if (code > 0xff) {
switch (code - 0xff) {
case RECORD_MUTE: return KEY_MICMUTE;
case PLAYBACK_MUTE: return KEY_MUTE;
case VOLUME_DOWN: return KEY_VOLUMEDOWN;
case VOLUME_UP: return KEY_VOLUMEUP;
}
}
return KEY_RESERVED;
}
/* Map device buttons to internal key events.
*
* The "up" and "down" keys, are symbolised by arrows on the button.
* The "pickup" and "hangup" keys are symbolised by a green and red phone
* on the button.
Komunikate KIP1000 Keyboard Matrix
-> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10)
| | | |
<- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20)
| | | |
END - 7 -- 8 -- 9 --> GPI pin 6 (0x40)
| | | |
OK -- * -- 0 -- # --> GPI pin 7 (0x80)
| | | |
/|\ /|\ /|\ /|\
| | | |
GPO
pin: 3 2 1 0
0x8 0x4 0x2 0x1
*/
static unsigned short keymap_kip1000(int scancode)
{
switch (scancode) { /* phone key: */
case 0x82: return KEY_NUMERIC_0; /* 0 */
case 0x14: return KEY_NUMERIC_1; /* 1 */
case 0x12: return KEY_NUMERIC_2; /* 2 */
case 0x11: return KEY_NUMERIC_3; /* 3 */
case 0x24: return KEY_NUMERIC_4; /* 4 */
case 0x22: return KEY_NUMERIC_5; /* 5 */
case 0x21: return KEY_NUMERIC_6; /* 6 */
case 0x44: return KEY_NUMERIC_7; /* 7 */
case 0x42: return KEY_NUMERIC_8; /* 8 */
case 0x41: return KEY_NUMERIC_9; /* 9 */
case 0x81: return KEY_NUMERIC_POUND; /* # */
case 0x84: return KEY_NUMERIC_STAR; /* * */
case 0x88: return KEY_ENTER; /* pickup */
case 0x48: return KEY_ESC; /* hangup */
case 0x28: return KEY_LEFT; /* IN */
case 0x18: return KEY_RIGHT; /* OUT */
default: return special_keymap(scancode);
}
}
/*
Contributed by Shaun Jackman <sjackman@gmail.com>
Genius G-Talk keyboard matrix
0 1 2 3
4: 0 4 8 Talk
5: 1 5 9 End
6: 2 6 # Up
7: 3 7 * Down
*/
static unsigned short keymap_gtalk(int scancode)
{
switch (scancode) {
case 0x11: return KEY_NUMERIC_0;
case 0x21: return KEY_NUMERIC_1;
case 0x41: return KEY_NUMERIC_2;
case 0x81: return KEY_NUMERIC_3;
case 0x12: return KEY_NUMERIC_4;
case 0x22: return KEY_NUMERIC_5;
case 0x42: return KEY_NUMERIC_6;
case 0x82: return KEY_NUMERIC_7;
case 0x14: return KEY_NUMERIC_8;
case 0x24: return KEY_NUMERIC_9;
case 0x44: return KEY_NUMERIC_POUND; /* # */
case 0x84: return KEY_NUMERIC_STAR; /* * */
case 0x18: return KEY_ENTER; /* Talk (green handset) */
case 0x28: return KEY_ESC; /* End (red handset) */
case 0x48: return KEY_UP; /* Menu up (rocker switch) */
case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */
default: return special_keymap(scancode);
}
}
/*
* Keymap for Allied-Telesis Corega USBPH01
* http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html
*
* Contributed by july@nat.bg
*/
static unsigned short keymap_usbph01(int scancode)
{
switch (scancode) {
case 0x11: return KEY_NUMERIC_0; /* 0 */
case 0x21: return KEY_NUMERIC_1; /* 1 */
case 0x41: return KEY_NUMERIC_2; /* 2 */
case 0x81: return KEY_NUMERIC_3; /* 3 */
case 0x12: return KEY_NUMERIC_4; /* 4 */
case 0x22: return KEY_NUMERIC_5; /* 5 */
case 0x42: return KEY_NUMERIC_6; /* 6 */
case 0x82: return KEY_NUMERIC_7; /* 7 */
case 0x14: return KEY_NUMERIC_8; /* 8 */
case 0x24: return KEY_NUMERIC_9; /* 9 */
case 0x44: return KEY_NUMERIC_POUND; /* # */
case 0x84: return KEY_NUMERIC_STAR; /* * */
case 0x18: return KEY_ENTER; /* pickup */
case 0x28: return KEY_ESC; /* hangup */
case 0x48: return KEY_LEFT; /* IN */
case 0x88: return KEY_RIGHT; /* OUT */
default: return special_keymap(scancode);
}
}
/*
* Keymap for ATCom AU-100
* http://www.atcom.cn/products.html
* http://www.packetizer.com/products/au100/
* http://www.voip-info.org/wiki/view/AU-100
*
* Contributed by daniel@gimpelevich.san-francisco.ca.us
*/
static unsigned short keymap_atcom(int scancode)
{
switch (scancode) { /* phone key: */
case 0x82: return KEY_NUMERIC_0; /* 0 */
case 0x11: return KEY_NUMERIC_1; /* 1 */
case 0x12: return KEY_NUMERIC_2; /* 2 */
case 0x14: return KEY_NUMERIC_3; /* 3 */
case 0x21: return KEY_NUMERIC_4; /* 4 */
case 0x22: return KEY_NUMERIC_5; /* 5 */
case 0x24: return KEY_NUMERIC_6; /* 6 */
case 0x41: return KEY_NUMERIC_7; /* 7 */
case 0x42: return KEY_NUMERIC_8; /* 8 */
case 0x44: return KEY_NUMERIC_9; /* 9 */
case 0x84: return KEY_NUMERIC_POUND; /* # */
case 0x81: return KEY_NUMERIC_STAR; /* * */
case 0x18: return KEY_ENTER; /* pickup */
case 0x28: return KEY_ESC; /* hangup */
case 0x48: return KEY_LEFT; /* left arrow */
case 0x88: return KEY_RIGHT; /* right arrow */
default: return special_keymap(scancode);
}
}
static unsigned short (*keymap)(int) = keymap_kip1000;
/*
* Completes a request by converting the data into events for the
* input subsystem.
*/
static void report_key(struct cm109_dev *dev, int key)
{
struct input_dev *idev = dev->idev;
if (dev->key_code >= 0) {
/* old key up */
input_report_key(idev, dev->key_code, 0);
}
dev->key_code = key;
if (key >= 0) {
/* new valid key */
input_report_key(idev, key, 1);
}
input_sync(idev);
}
/*
* Converts data of special key presses (volume, mute) into events
* for the input subsystem, sends press-n-release for mute keys.
*/
static void cm109_report_special(struct cm109_dev *dev)
{
static const u8 autorelease = RECORD_MUTE | PLAYBACK_MUTE;
struct input_dev *idev = dev->idev;
u8 data = dev->irq_data->byte[HID_IR0];
unsigned short keycode;
int i;
for (i = 0; i < 4; i++) {
keycode = dev->keymap[0xff + BIT(i)];
if (keycode == KEY_RESERVED)
continue;
input_report_key(idev, keycode, data & BIT(i));
if (data & autorelease & BIT(i)) {
input_sync(idev);
input_report_key(idev, keycode, 0);
}
}
input_sync(idev);
}
/******************************************************************************
* CM109 usb communication interface
*****************************************************************************/
static void cm109_submit_buzz_toggle(struct cm109_dev *dev)
{
int error;
if (dev->buzzer_state)
dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
else
dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
if (error)
dev_err(&dev->intf->dev,
"%s: usb_submit_urb (urb_ctl) failed %d\n",
__func__, error);
}
/*
* IRQ handler
*/
static void cm109_urb_irq_callback(struct urb *urb)
{
struct cm109_dev *dev = urb->context;
const int status = urb->status;
int error;
unsigned long flags;
dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
dev->irq_data->byte[0],
dev->irq_data->byte[1],
dev->irq_data->byte[2],
dev->irq_data->byte[3],
dev->keybit);
if (status) {
if (status == -ESHUTDOWN)
return;
dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
__func__, status);
goto out;
}
/* Special keys */
cm109_report_special(dev);
/* Scan key column */
if (dev->keybit == 0xf) {
/* Any changes ? */
if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0))
goto out;
dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0;
dev->keybit = 0x1;
} else {
report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]);
dev->keybit <<= 1;
if (dev->keybit > 0x8)
dev->keybit = 0xf;
}
out:
spin_lock_irqsave(&dev->ctl_submit_lock, flags);
dev->irq_urb_pending = 0;
if (likely(!dev->shutdown)) {
if (dev->buzzer_state)
dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
else
dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
dev->ctl_data->byte[HID_OR1] = dev->keybit;
dev->ctl_data->byte[HID_OR2] = dev->keybit;
dev->buzzer_pending = 0;
dev->ctl_urb_pending = 1;
error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
if (error)
dev_err(&dev->intf->dev,
"%s: usb_submit_urb (urb_ctl) failed %d\n",
__func__, error);
}
spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
}
static void cm109_urb_ctl_callback(struct urb *urb)
{
struct cm109_dev *dev = urb->context;
const int status = urb->status;
int error;
unsigned long flags;
dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
dev->ctl_data->byte[0],
dev->ctl_data->byte[1],
dev->ctl_data->byte[2],
dev->ctl_data->byte[3]);
if (status) {
if (status == -ESHUTDOWN)
return;
dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
__func__, status);
}
spin_lock_irqsave(&dev->ctl_submit_lock, flags);
dev->ctl_urb_pending = 0;
if (likely(!dev->shutdown)) {
if (dev->buzzer_pending || status) {
dev->buzzer_pending = 0;
dev->ctl_urb_pending = 1;
cm109_submit_buzz_toggle(dev);
} else if (likely(!dev->irq_urb_pending)) {
/* ask for key data */
dev->irq_urb_pending = 1;
error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC);
if (error)
dev_err(&dev->intf->dev,
"%s: usb_submit_urb (urb_irq) failed %d\n",
__func__, error);
}
}
spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
}
static void cm109_toggle_buzzer_async(struct cm109_dev *dev)
{
unsigned long flags;
spin_lock_irqsave(&dev->ctl_submit_lock, flags);
if (dev->ctl_urb_pending) {
/* URB completion will resubmit */
dev->buzzer_pending = 1;
} else {
dev->ctl_urb_pending = 1;
cm109_submit_buzz_toggle(dev);
}
spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
}
static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
{
int error;
if (on)
dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
else
dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
error = usb_control_msg(dev->udev,
usb_sndctrlpipe(dev->udev, 0),
dev->ctl_req->bRequest,
dev->ctl_req->bRequestType,
le16_to_cpu(dev->ctl_req->wValue),
le16_to_cpu(dev->ctl_req->wIndex),
dev->ctl_data,
USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
if (error < 0 && error != -EINTR)
dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n",
__func__, error);
}
static void cm109_stop_traffic(struct cm109_dev *dev)
{
dev->shutdown = 1;
/*
* Make sure other CPUs see this
*/
smp_wmb();
usb_kill_urb(dev->urb_ctl);
usb_kill_urb(dev->urb_irq);
cm109_toggle_buzzer_sync(dev, 0);
dev->shutdown = 0;
smp_wmb();
}
static void cm109_restore_state(struct cm109_dev *dev)
{
if (dev->open) {
/*
* Restore buzzer state.
* This will also kick regular URB submission
*/
cm109_toggle_buzzer_async(dev);
}
}
/******************************************************************************
* input event interface
*****************************************************************************/
static int cm109_input_open(struct input_dev *idev)
{
struct cm109_dev *dev = input_get_drvdata(idev);
int error;
error = usb_autopm_get_interface(dev->intf);
if (error < 0) {
dev_err(&idev->dev, "%s - cannot autoresume, result %d\n",
__func__, error);
return error;
}
mutex_lock(&dev->pm_mutex);
dev->buzzer_state = 0;
dev->key_code = -1; /* no keys pressed */
dev->keybit = 0xf;
/* issue INIT */
dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF;
dev->ctl_data->byte[HID_OR1] = dev->keybit;
dev->ctl_data->byte[HID_OR2] = dev->keybit;
dev->ctl_data->byte[HID_OR3] = 0x00;
error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
if (error)
dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
__func__, error);
else
dev->open = 1;
mutex_unlock(&dev->pm_mutex);
if (error)
usb_autopm_put_interface(dev->intf);
return error;
}
static void cm109_input_close(struct input_dev *idev)
{
struct cm109_dev *dev = input_get_drvdata(idev);
mutex_lock(&dev->pm_mutex);
/*
* Once we are here event delivery is stopped so we
* don't need to worry about someone starting buzzer
* again
*/
cm109_stop_traffic(dev);
dev->open = 0;
mutex_unlock(&dev->pm_mutex);
usb_autopm_put_interface(dev->intf);
}
static int cm109_input_ev(struct input_dev *idev, unsigned int type,
unsigned int code, int value)
{
struct cm109_dev *dev = input_get_drvdata(idev);
dev_dbg(&dev->intf->dev,
"input_ev: type=%u code=%u value=%d\n", type, code, value);
if (type != EV_SND)
return -EINVAL;
switch (code) {
case SND_TONE:
case SND_BELL:
dev->buzzer_state = !!value;
if (!dev->resetting)
cm109_toggle_buzzer_async(dev);
return 0;
default:
return -EINVAL;
}
}
/******************************************************************************
* Linux interface and usb initialisation
*****************************************************************************/
struct driver_info {
char *name;
};
static const struct driver_info info_cm109 = {
.name = "CM109 USB driver",
};
enum {
VENDOR_ID = 0x0d8c, /* C-Media Electronics */
PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */
};
/* table of devices that work with this driver */
static const struct usb_device_id cm109_usb_table[] = {
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = VENDOR_ID,
.idProduct = PRODUCT_ID_CM109,
.bInterfaceClass = USB_CLASS_HID,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.driver_info = (kernel_ulong_t) &info_cm109
},
/* you can add more devices here with product ID 0x0008 - 0x000f */
{ }
};
static void cm109_usb_cleanup(struct cm109_dev *dev)
{
kfree(dev->ctl_req);
if (dev->ctl_data)
usb_free_coherent(dev->udev, USB_PKT_LEN,
dev->ctl_data, dev->ctl_dma);
if (dev->irq_data)
usb_free_coherent(dev->udev, USB_PKT_LEN,
dev->irq_data, dev->irq_dma);
usb_free_urb(dev->urb_irq); /* parameter validation in core/urb */
usb_free_urb(dev->urb_ctl); /* parameter validation in core/urb */
kfree(dev);
}
static void cm109_usb_disconnect(struct usb_interface *interface)
{
struct cm109_dev *dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
input_unregister_device(dev->idev);
cm109_usb_cleanup(dev);
}
static int cm109_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct driver_info *nfo = (struct driver_info *)id->driver_info;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct cm109_dev *dev;
struct input_dev *input_dev = NULL;
int ret, pipe, i;
int error = -ENOMEM;
interface = intf->cur_altsetting;
if (interface->desc.bNumEndpoints < 1)
return -ENODEV;
endpoint = &interface->endpoint[0].desc;
if (!usb_endpoint_is_int_in(endpoint))
return -ENODEV;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
spin_lock_init(&dev->ctl_submit_lock);
mutex_init(&dev->pm_mutex);
dev->udev = udev;
dev->intf = intf;
dev->idev = input_dev = input_allocate_device();
if (!input_dev)
goto err_out;
/* allocate usb buffers */
dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
GFP_KERNEL, &dev->irq_dma);
if (!dev->irq_data)
goto err_out;
dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
GFP_KERNEL, &dev->ctl_dma);
if (!dev->ctl_data)
goto err_out;
dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL);
if (!dev->ctl_req)
goto err_out;
/* allocate urb structures */
dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb_irq)
goto err_out;
dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb_ctl)
goto err_out;
/* get a handle to the interrupt data pipe */
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
if (ret != USB_PKT_LEN)
dev_err(&intf->dev, "invalid payload size %d, expected %d\n",
ret, USB_PKT_LEN);
/* initialise irq urb */
usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data,
USB_PKT_LEN,
cm109_urb_irq_callback, dev, endpoint->bInterval);
dev->urb_irq->transfer_dma = dev->irq_dma;
dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
dev->urb_irq->dev = udev;
/* initialise ctl urb */
dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
USB_DIR_OUT;
dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
dev->ctl_req->wValue = cpu_to_le16(0x200);
dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
(void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN,
cm109_urb_ctl_callback, dev);
dev->urb_ctl->transfer_dma = dev->ctl_dma;
dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
dev->urb_ctl->dev = udev;
/* find out the physical bus location */
usb_make_path(udev, dev->phys, sizeof(dev->phys));
strlcat(dev->phys, "/input0", sizeof(dev->phys));
/* register settings for the input device */
input_dev->name = nfo->name;
input_dev->phys = dev->phys;
usb_to_input_id(udev, &input_dev->id);
input_dev->dev.parent = &intf->dev;
input_set_drvdata(input_dev, dev);
input_dev->open = cm109_input_open;
input_dev->close = cm109_input_close;
input_dev->event = cm109_input_ev;
input_dev->keycode = dev->keymap;
input_dev->keycodesize = sizeof(unsigned char);
input_dev->keycodemax = ARRAY_SIZE(dev->keymap);
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND);
input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
/* register available key events */
for (i = 0; i < KEYMAP_SIZE; i++) {
unsigned short k = keymap(i);
dev->keymap[i] = k;
__set_bit(k, input_dev->keybit);
}
__clear_bit(KEY_RESERVED, input_dev->keybit);
error = input_register_device(dev->idev);
if (error)
goto err_out;
usb_set_intfdata(intf, dev);
return 0;
err_out:
input_free_device(input_dev);
cm109_usb_cleanup(dev);
return error;
}
static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct cm109_dev *dev = usb_get_intfdata(intf);
dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event);
mutex_lock(&dev->pm_mutex);
cm109_stop_traffic(dev);
mutex_unlock(&dev->pm_mutex);
return 0;
}
static int cm109_usb_resume(struct usb_interface *intf)
{
struct cm109_dev *dev = usb_get_intfdata(intf);
dev_info(&intf->dev, "cm109: usb_resume\n");
mutex_lock(&dev->pm_mutex);
cm109_restore_state(dev);
mutex_unlock(&dev->pm_mutex);
return 0;
}
static int cm109_usb_pre_reset(struct usb_interface *intf)
{
struct cm109_dev *dev = usb_get_intfdata(intf);
mutex_lock(&dev->pm_mutex);
/*
* Make sure input events don't try to toggle buzzer
* while we are resetting
*/
dev->resetting = 1;
smp_wmb();
cm109_stop_traffic(dev);
return 0;
}
static int cm109_usb_post_reset(struct usb_interface *intf)
{
struct cm109_dev *dev = usb_get_intfdata(intf);
dev->resetting = 0;
smp_wmb();
cm109_restore_state(dev);
mutex_unlock(&dev->pm_mutex);
return 0;
}
static struct usb_driver cm109_driver = {
.name = "cm109",
.probe = cm109_usb_probe,
.disconnect = cm109_usb_disconnect,
.suspend = cm109_usb_suspend,
.resume = cm109_usb_resume,
.reset_resume = cm109_usb_resume,
.pre_reset = cm109_usb_pre_reset,
.post_reset = cm109_usb_post_reset,
.id_table = cm109_usb_table,
.supports_autosuspend = 1,
};
static int __init cm109_select_keymap(void)
{
/* Load the phone keymap */
if (!strcasecmp(phone, "kip1000")) {
keymap = keymap_kip1000;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Komunikate KIP1000 phone loaded\n");
} else if (!strcasecmp(phone, "gtalk")) {
keymap = keymap_gtalk;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Genius G-talk phone loaded\n");
} else if (!strcasecmp(phone, "usbph01")) {
keymap = keymap_usbph01;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
} else if (!strcasecmp(phone, "atcom")) {
keymap = keymap_atcom;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for ATCom AU-100 phone loaded\n");
} else {
printk(KERN_ERR KBUILD_MODNAME ": "
"Unsupported phone: %s\n", phone);
return -EINVAL;
}
return 0;
}
static int __init cm109_init(void)
{
int err;
err = cm109_select_keymap();
if (err)
return err;
err = usb_register(&cm109_driver);
if (err)
return err;
printk(KERN_INFO KBUILD_MODNAME ": "
DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
return 0;
}
static void __exit cm109_exit(void)
{
usb_deregister(&cm109_driver);
}
module_init(cm109_init);
module_exit(cm109_exit);
MODULE_DEVICE_TABLE(usb, cm109_usb_table);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink