1154 lines
		
	
	
		
			26 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1154 lines
		
	
	
		
			26 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * CAN driver for esd CAN-USB/2 and CAN-USB/Micro
 | |
|  *
 | |
|  * Copyright (C) 2010-2012 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify it
 | |
|  * under the terms of the GNU General Public License as published
 | |
|  * by the Free Software Foundation; version 2 of the License.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful, but
 | |
|  * WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 | |
|  * General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License along
 | |
|  * with this program; if not, write to the Free Software Foundation, Inc.,
 | |
|  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 | |
|  */
 | |
| #include <linux/signal.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/usb.h>
 | |
| 
 | |
| #include <linux/can.h>
 | |
| #include <linux/can/dev.h>
 | |
| #include <linux/can/error.h>
 | |
| 
 | |
| MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@esd.eu>");
 | |
| MODULE_DESCRIPTION("CAN driver for esd CAN-USB/2 and CAN-USB/Micro interfaces");
 | |
| MODULE_LICENSE("GPL v2");
 | |
| 
 | |
| /* Define these values to match your devices */
 | |
| #define USB_ESDGMBH_VENDOR_ID	0x0ab4
 | |
| #define USB_CANUSB2_PRODUCT_ID	0x0010
 | |
| #define USB_CANUSBM_PRODUCT_ID	0x0011
 | |
| 
 | |
| #define ESD_USB2_CAN_CLOCK	60000000
 | |
| #define ESD_USBM_CAN_CLOCK	36000000
 | |
| #define ESD_USB2_MAX_NETS	2
 | |
| 
 | |
| /* USB2 commands */
 | |
| #define CMD_VERSION		1 /* also used for VERSION_REPLY */
 | |
| #define CMD_CAN_RX		2 /* device to host only */
 | |
| #define CMD_CAN_TX		3 /* also used for TX_DONE */
 | |
| #define CMD_SETBAUD		4 /* also used for SETBAUD_REPLY */
 | |
| #define CMD_TS			5 /* also used for TS_REPLY */
 | |
| #define CMD_IDADD		6 /* also used for IDADD_REPLY */
 | |
| 
 | |
| /* esd CAN message flags - dlc field */
 | |
| #define ESD_RTR			0x10
 | |
| 
 | |
| /* esd CAN message flags - id field */
 | |
| #define ESD_EXTID		0x20000000
 | |
| #define ESD_EVENT		0x40000000
 | |
| #define ESD_IDMASK		0x1fffffff
 | |
| 
 | |
| /* esd CAN event ids used by this driver */
 | |
| #define ESD_EV_CAN_ERROR_EXT	2
 | |
| 
 | |
| /* baudrate message flags */
 | |
| #define ESD_USB2_UBR		0x80000000
 | |
| #define ESD_USB2_LOM		0x40000000
 | |
| #define ESD_USB2_NO_BAUDRATE	0x7fffffff
 | |
| #define ESD_USB2_TSEG1_MIN	1
 | |
| #define ESD_USB2_TSEG1_MAX	16
 | |
| #define ESD_USB2_TSEG1_SHIFT	16
 | |
| #define ESD_USB2_TSEG2_MIN	1
 | |
| #define ESD_USB2_TSEG2_MAX	8
 | |
| #define ESD_USB2_TSEG2_SHIFT	20
 | |
| #define ESD_USB2_SJW_MAX	4
 | |
| #define ESD_USB2_SJW_SHIFT	14
 | |
| #define ESD_USBM_SJW_SHIFT	24
 | |
| #define ESD_USB2_BRP_MIN	1
 | |
| #define ESD_USB2_BRP_MAX	1024
 | |
| #define ESD_USB2_BRP_INC	1
 | |
| #define ESD_USB2_3_SAMPLES	0x00800000
 | |
| 
 | |
| /* esd IDADD message */
 | |
| #define ESD_ID_ENABLE		0x80
 | |
| #define ESD_MAX_ID_SEGMENT	64
 | |
| 
 | |
| /* SJA1000 ECC register (emulated by usb2 firmware) */
 | |
| #define SJA1000_ECC_SEG		0x1F
 | |
| #define SJA1000_ECC_DIR		0x20
 | |
| #define SJA1000_ECC_ERR		0x06
 | |
| #define SJA1000_ECC_BIT		0x00
 | |
| #define SJA1000_ECC_FORM	0x40
 | |
| #define SJA1000_ECC_STUFF	0x80
 | |
| #define SJA1000_ECC_MASK	0xc0
 | |
| 
 | |
| /* esd bus state event codes */
 | |
| #define ESD_BUSSTATE_MASK	0xc0
 | |
| #define ESD_BUSSTATE_WARN	0x40
 | |
| #define ESD_BUSSTATE_ERRPASSIVE	0x80
 | |
| #define ESD_BUSSTATE_BUSOFF	0xc0
 | |
| 
 | |
| #define RX_BUFFER_SIZE		1024
 | |
| #define MAX_RX_URBS		4
 | |
| #define MAX_TX_URBS		16 /* must be power of 2 */
 | |
| 
 | |
| struct header_msg {
 | |
| 	u8 len; /* len is always the total message length in 32bit words */
 | |
| 	u8 cmd;
 | |
| 	u8 rsvd[2];
 | |
| };
 | |
| 
 | |
| struct version_msg {
 | |
| 	u8 len;
 | |
| 	u8 cmd;
 | |
| 	u8 rsvd;
 | |
| 	u8 flags;
 | |
| 	__le32 drv_version;
 | |
| };
 | |
| 
 | |
| struct version_reply_msg {
 | |
| 	u8 len;
 | |
| 	u8 cmd;
 | |
| 	u8 nets;
 | |
| 	u8 features;
 | |
| 	__le32 version;
 | |
| 	u8 name[16];
 | |
| 	__le32 rsvd;
 | |
| 	__le32 ts;
 | |
| };
 | |
| 
 | |
| struct rx_msg {
 | |
| 	u8 len;
 | |
| 	u8 cmd;
 | |
| 	u8 net;
 | |
| 	u8 dlc;
 | |
| 	__le32 ts;
 | |
| 	__le32 id; /* upper 3 bits contain flags */
 | |
| 	u8 data[8];
 | |
| };
 | |
| 
 | |
| struct tx_msg {
 | |
| 	u8 len;
 | |
| 	u8 cmd;
 | |
| 	u8 net;
 | |
| 	u8 dlc;
 | |
| 	u32 hnd;	/* opaque handle, not used by device */
 | |
| 	__le32 id; /* upper 3 bits contain flags */
 | |
| 	u8 data[8];
 | |
| };
 | |
| 
 | |
| struct tx_done_msg {
 | |
| 	u8 len;
 | |
| 	u8 cmd;
 | |
| 	u8 net;
 | |
| 	u8 status;
 | |
| 	u32 hnd;	/* opaque handle, not used by device */
 | |
| 	__le32 ts;
 | |
| };
 | |
| 
 | |
| struct id_filter_msg {
 | |
| 	u8 len;
 | |
| 	u8 cmd;
 | |
| 	u8 net;
 | |
| 	u8 option;
 | |
| 	__le32 mask[ESD_MAX_ID_SEGMENT + 1];
 | |
| };
 | |
| 
 | |
| struct set_baudrate_msg {
 | |
| 	u8 len;
 | |
| 	u8 cmd;
 | |
| 	u8 net;
 | |
| 	u8 rsvd;
 | |
| 	__le32 baud;
 | |
| };
 | |
| 
 | |
| /* Main message type used between library and application */
 | |
| struct __attribute__ ((packed)) esd_usb2_msg {
 | |
| 	union {
 | |
| 		struct header_msg hdr;
 | |
| 		struct version_msg version;
 | |
| 		struct version_reply_msg version_reply;
 | |
| 		struct rx_msg rx;
 | |
| 		struct tx_msg tx;
 | |
| 		struct tx_done_msg txdone;
 | |
| 		struct set_baudrate_msg setbaud;
 | |
| 		struct id_filter_msg filter;
 | |
| 	} msg;
 | |
| };
 | |
| 
 | |
| static struct usb_device_id esd_usb2_table[] = {
 | |
| 	{USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSB2_PRODUCT_ID)},
 | |
| 	{USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSBM_PRODUCT_ID)},
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(usb, esd_usb2_table);
 | |
| 
 | |
| struct esd_usb2_net_priv;
 | |
| 
 | |
| struct esd_tx_urb_context {
 | |
| 	struct esd_usb2_net_priv *priv;
 | |
| 	u32 echo_index;
 | |
| 	int dlc;
 | |
| };
 | |
| 
 | |
| struct esd_usb2 {
 | |
| 	struct usb_device *udev;
 | |
| 	struct esd_usb2_net_priv *nets[ESD_USB2_MAX_NETS];
 | |
| 
 | |
| 	struct usb_anchor rx_submitted;
 | |
| 
 | |
| 	int net_count;
 | |
| 	u32 version;
 | |
| 	int rxinitdone;
 | |
| };
 | |
| 
 | |
| struct esd_usb2_net_priv {
 | |
| 	struct can_priv can; /* must be the first member */
 | |
| 
 | |
| 	atomic_t active_tx_jobs;
 | |
| 	struct usb_anchor tx_submitted;
 | |
| 	struct esd_tx_urb_context tx_contexts[MAX_TX_URBS];
 | |
| 
 | |
| 	struct esd_usb2 *usb2;
 | |
| 	struct net_device *netdev;
 | |
| 	int index;
 | |
| 	u8 old_state;
 | |
| 	struct can_berr_counter bec;
 | |
| };
 | |
| 
 | |
| static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
 | |
| 			      struct esd_usb2_msg *msg)
 | |
| {
 | |
| 	struct net_device_stats *stats = &priv->netdev->stats;
 | |
| 	struct can_frame *cf;
 | |
| 	struct sk_buff *skb;
 | |
| 	u32 id = le32_to_cpu(msg->msg.rx.id) & ESD_IDMASK;
 | |
| 
 | |
| 	if (id == ESD_EV_CAN_ERROR_EXT) {
 | |
| 		u8 state = msg->msg.rx.data[0];
 | |
| 		u8 ecc = msg->msg.rx.data[1];
 | |
| 		u8 txerr = msg->msg.rx.data[2];
 | |
| 		u8 rxerr = msg->msg.rx.data[3];
 | |
| 
 | |
| 		skb = alloc_can_err_skb(priv->netdev, &cf);
 | |
| 		if (skb == NULL) {
 | |
| 			stats->rx_dropped++;
 | |
| 			return;
 | |
| 		}
 | |
| 
 | |
| 		if (state != priv->old_state) {
 | |
| 			priv->old_state = state;
 | |
| 
 | |
| 			switch (state & ESD_BUSSTATE_MASK) {
 | |
| 			case ESD_BUSSTATE_BUSOFF:
 | |
| 				priv->can.state = CAN_STATE_BUS_OFF;
 | |
| 				cf->can_id |= CAN_ERR_BUSOFF;
 | |
| 				priv->can.can_stats.bus_off++;
 | |
| 				can_bus_off(priv->netdev);
 | |
| 				break;
 | |
| 			case ESD_BUSSTATE_WARN:
 | |
| 				priv->can.state = CAN_STATE_ERROR_WARNING;
 | |
| 				priv->can.can_stats.error_warning++;
 | |
| 				break;
 | |
| 			case ESD_BUSSTATE_ERRPASSIVE:
 | |
| 				priv->can.state = CAN_STATE_ERROR_PASSIVE;
 | |
| 				priv->can.can_stats.error_passive++;
 | |
| 				break;
 | |
| 			default:
 | |
| 				priv->can.state = CAN_STATE_ERROR_ACTIVE;
 | |
| 				break;
 | |
| 			}
 | |
| 		} else {
 | |
| 			priv->can.can_stats.bus_error++;
 | |
| 			stats->rx_errors++;
 | |
| 
 | |
| 			cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
 | |
| 
 | |
| 			switch (ecc & SJA1000_ECC_MASK) {
 | |
| 			case SJA1000_ECC_BIT:
 | |
| 				cf->data[2] |= CAN_ERR_PROT_BIT;
 | |
| 				break;
 | |
| 			case SJA1000_ECC_FORM:
 | |
| 				cf->data[2] |= CAN_ERR_PROT_FORM;
 | |
| 				break;
 | |
| 			case SJA1000_ECC_STUFF:
 | |
| 				cf->data[2] |= CAN_ERR_PROT_STUFF;
 | |
| 				break;
 | |
| 			default:
 | |
| 				cf->data[3] = ecc & SJA1000_ECC_SEG;
 | |
| 				break;
 | |
| 			}
 | |
| 
 | |
| 			/* Error occurred during transmission? */
 | |
| 			if (!(ecc & SJA1000_ECC_DIR))
 | |
| 				cf->data[2] |= CAN_ERR_PROT_TX;
 | |
| 
 | |
| 			if (priv->can.state == CAN_STATE_ERROR_WARNING ||
 | |
| 			    priv->can.state == CAN_STATE_ERROR_PASSIVE) {
 | |
| 				cf->data[1] = (txerr > rxerr) ?
 | |
| 					CAN_ERR_CRTL_TX_PASSIVE :
 | |
| 					CAN_ERR_CRTL_RX_PASSIVE;
 | |
| 			}
 | |
| 			cf->data[6] = txerr;
 | |
| 			cf->data[7] = rxerr;
 | |
| 		}
 | |
| 
 | |
| 		priv->bec.txerr = txerr;
 | |
| 		priv->bec.rxerr = rxerr;
 | |
| 
 | |
| 		stats->rx_packets++;
 | |
| 		stats->rx_bytes += cf->can_dlc;
 | |
| 		netif_rx(skb);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv *priv,
 | |
| 				struct esd_usb2_msg *msg)
 | |
| {
 | |
| 	struct net_device_stats *stats = &priv->netdev->stats;
 | |
| 	struct can_frame *cf;
 | |
| 	struct sk_buff *skb;
 | |
| 	int i;
 | |
| 	u32 id;
 | |
| 
 | |
| 	if (!netif_device_present(priv->netdev))
 | |
| 		return;
 | |
| 
 | |
| 	id = le32_to_cpu(msg->msg.rx.id);
 | |
| 
 | |
| 	if (id & ESD_EVENT) {
 | |
| 		esd_usb2_rx_event(priv, msg);
 | |
| 	} else {
 | |
| 		skb = alloc_can_skb(priv->netdev, &cf);
 | |
| 		if (skb == NULL) {
 | |
| 			stats->rx_dropped++;
 | |
| 			return;
 | |
| 		}
 | |
| 
 | |
| 		cf->can_id = id & ESD_IDMASK;
 | |
| 		cf->can_dlc = get_can_dlc(msg->msg.rx.dlc & ~ESD_RTR);
 | |
| 
 | |
| 		if (id & ESD_EXTID)
 | |
| 			cf->can_id |= CAN_EFF_FLAG;
 | |
| 
 | |
| 		if (msg->msg.rx.dlc & ESD_RTR) {
 | |
| 			cf->can_id |= CAN_RTR_FLAG;
 | |
| 		} else {
 | |
| 			for (i = 0; i < cf->can_dlc; i++)
 | |
| 				cf->data[i] = msg->msg.rx.data[i];
 | |
| 		}
 | |
| 
 | |
| 		stats->rx_packets++;
 | |
| 		stats->rx_bytes += cf->can_dlc;
 | |
| 		netif_rx(skb);
 | |
| 	}
 | |
| 
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv,
 | |
| 				 struct esd_usb2_msg *msg)
 | |
| {
 | |
| 	struct net_device_stats *stats = &priv->netdev->stats;
 | |
| 	struct net_device *netdev = priv->netdev;
 | |
| 	struct esd_tx_urb_context *context;
 | |
| 
 | |
| 	if (!netif_device_present(netdev))
 | |
| 		return;
 | |
| 
 | |
| 	context = &priv->tx_contexts[msg->msg.txdone.hnd & (MAX_TX_URBS - 1)];
 | |
| 
 | |
| 	if (!msg->msg.txdone.status) {
 | |
| 		stats->tx_packets++;
 | |
| 		stats->tx_bytes += context->dlc;
 | |
| 		can_get_echo_skb(netdev, context->echo_index);
 | |
| 	} else {
 | |
| 		stats->tx_errors++;
 | |
| 		can_free_echo_skb(netdev, context->echo_index);
 | |
| 	}
 | |
| 
 | |
| 	/* Release context */
 | |
| 	context->echo_index = MAX_TX_URBS;
 | |
| 	atomic_dec(&priv->active_tx_jobs);
 | |
| 
 | |
| 	netif_wake_queue(netdev);
 | |
| }
 | |
| 
 | |
| static void esd_usb2_read_bulk_callback(struct urb *urb)
 | |
| {
 | |
| 	struct esd_usb2 *dev = urb->context;
 | |
| 	int retval;
 | |
| 	int pos = 0;
 | |
| 	int i;
 | |
| 
 | |
| 	switch (urb->status) {
 | |
| 	case 0: /* success */
 | |
| 		break;
 | |
| 
 | |
| 	case -ENOENT:
 | |
| 	case -EPIPE:
 | |
| 	case -EPROTO:
 | |
| 	case -ESHUTDOWN:
 | |
| 		return;
 | |
| 
 | |
| 	default:
 | |
| 		dev_info(dev->udev->dev.parent,
 | |
| 			 "Rx URB aborted (%d)\n", urb->status);
 | |
| 		goto resubmit_urb;
 | |
| 	}
 | |
| 
 | |
| 	while (pos < urb->actual_length) {
 | |
| 		struct esd_usb2_msg *msg;
 | |
| 
 | |
| 		msg = (struct esd_usb2_msg *)(urb->transfer_buffer + pos);
 | |
| 
 | |
| 		switch (msg->msg.hdr.cmd) {
 | |
| 		case CMD_CAN_RX:
 | |
| 			if (msg->msg.rx.net >= dev->net_count) {
 | |
| 				dev_err(dev->udev->dev.parent, "format error\n");
 | |
| 				break;
 | |
| 			}
 | |
| 
 | |
| 			esd_usb2_rx_can_msg(dev->nets[msg->msg.rx.net], msg);
 | |
| 			break;
 | |
| 
 | |
| 		case CMD_CAN_TX:
 | |
| 			if (msg->msg.txdone.net >= dev->net_count) {
 | |
| 				dev_err(dev->udev->dev.parent, "format error\n");
 | |
| 				break;
 | |
| 			}
 | |
| 
 | |
| 			esd_usb2_tx_done_msg(dev->nets[msg->msg.txdone.net],
 | |
| 					     msg);
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		pos += msg->msg.hdr.len << 2;
 | |
| 
 | |
| 		if (pos > urb->actual_length) {
 | |
| 			dev_err(dev->udev->dev.parent, "format error\n");
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| resubmit_urb:
 | |
| 	usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
 | |
| 			  urb->transfer_buffer, RX_BUFFER_SIZE,
 | |
| 			  esd_usb2_read_bulk_callback, dev);
 | |
| 
 | |
| 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 | |
| 	if (retval == -ENODEV) {
 | |
| 		for (i = 0; i < dev->net_count; i++) {
 | |
| 			if (dev->nets[i])
 | |
| 				netif_device_detach(dev->nets[i]->netdev);
 | |
| 		}
 | |
| 	} else if (retval) {
 | |
| 		dev_err(dev->udev->dev.parent,
 | |
| 			"failed resubmitting read bulk urb: %d\n", retval);
 | |
| 	}
 | |
| 
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * callback for bulk IN urb
 | |
|  */
 | |
| static void esd_usb2_write_bulk_callback(struct urb *urb)
 | |
| {
 | |
| 	struct esd_tx_urb_context *context = urb->context;
 | |
| 	struct esd_usb2_net_priv *priv;
 | |
| 	struct net_device *netdev;
 | |
| 	size_t size = sizeof(struct esd_usb2_msg);
 | |
| 
 | |
| 	WARN_ON(!context);
 | |
| 
 | |
| 	priv = context->priv;
 | |
| 	netdev = priv->netdev;
 | |
| 
 | |
| 	/* free up our allocated buffer */
 | |
| 	usb_free_coherent(urb->dev, size,
 | |
| 			  urb->transfer_buffer, urb->transfer_dma);
 | |
| 
 | |
| 	if (!netif_device_present(netdev))
 | |
| 		return;
 | |
| 
 | |
| 	if (urb->status)
 | |
| 		netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status);
 | |
| 
 | |
| 	netif_trans_update(netdev);
 | |
| }
 | |
| 
 | |
| static ssize_t show_firmware(struct device *d,
 | |
| 			     struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct usb_interface *intf = to_usb_interface(d);
 | |
| 	struct esd_usb2 *dev = usb_get_intfdata(intf);
 | |
| 
 | |
| 	return sprintf(buf, "%d.%d.%d\n",
 | |
| 		       (dev->version >> 12) & 0xf,
 | |
| 		       (dev->version >> 8) & 0xf,
 | |
| 		       dev->version & 0xff);
 | |
| }
 | |
| static DEVICE_ATTR(firmware, 0444, show_firmware, NULL);
 | |
| 
 | |
| static ssize_t show_hardware(struct device *d,
 | |
| 			     struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct usb_interface *intf = to_usb_interface(d);
 | |
| 	struct esd_usb2 *dev = usb_get_intfdata(intf);
 | |
| 
 | |
| 	return sprintf(buf, "%d.%d.%d\n",
 | |
| 		       (dev->version >> 28) & 0xf,
 | |
| 		       (dev->version >> 24) & 0xf,
 | |
| 		       (dev->version >> 16) & 0xff);
 | |
| }
 | |
| static DEVICE_ATTR(hardware, 0444, show_hardware, NULL);
 | |
| 
 | |
| static ssize_t show_nets(struct device *d,
 | |
| 			 struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct usb_interface *intf = to_usb_interface(d);
 | |
| 	struct esd_usb2 *dev = usb_get_intfdata(intf);
 | |
| 
 | |
| 	return sprintf(buf, "%d", dev->net_count);
 | |
| }
 | |
| static DEVICE_ATTR(nets, 0444, show_nets, NULL);
 | |
| 
 | |
| static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg)
 | |
| {
 | |
| 	int actual_length;
 | |
| 
 | |
| 	return usb_bulk_msg(dev->udev,
 | |
| 			    usb_sndbulkpipe(dev->udev, 2),
 | |
| 			    msg,
 | |
| 			    msg->msg.hdr.len << 2,
 | |
| 			    &actual_length,
 | |
| 			    1000);
 | |
| }
 | |
| 
 | |
| static int esd_usb2_wait_msg(struct esd_usb2 *dev,
 | |
| 			     struct esd_usb2_msg *msg)
 | |
| {
 | |
| 	int actual_length;
 | |
| 
 | |
| 	return usb_bulk_msg(dev->udev,
 | |
| 			    usb_rcvbulkpipe(dev->udev, 1),
 | |
| 			    msg,
 | |
| 			    sizeof(*msg),
 | |
| 			    &actual_length,
 | |
| 			    1000);
 | |
| }
 | |
| 
 | |
| static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev)
 | |
| {
 | |
| 	int i, err = 0;
 | |
| 
 | |
| 	if (dev->rxinitdone)
 | |
| 		return 0;
 | |
| 
 | |
| 	for (i = 0; i < MAX_RX_URBS; i++) {
 | |
| 		struct urb *urb = NULL;
 | |
| 		u8 *buf = NULL;
 | |
| 
 | |
| 		/* create a URB, and a buffer for it */
 | |
| 		urb = usb_alloc_urb(0, GFP_KERNEL);
 | |
| 		if (!urb) {
 | |
| 			err = -ENOMEM;
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
 | |
| 					 &urb->transfer_dma);
 | |
| 		if (!buf) {
 | |
| 			dev_warn(dev->udev->dev.parent,
 | |
| 				 "No memory left for USB buffer\n");
 | |
| 			err = -ENOMEM;
 | |
| 			goto freeurb;
 | |
| 		}
 | |
| 
 | |
| 		usb_fill_bulk_urb(urb, dev->udev,
 | |
| 				  usb_rcvbulkpipe(dev->udev, 1),
 | |
| 				  buf, RX_BUFFER_SIZE,
 | |
| 				  esd_usb2_read_bulk_callback, dev);
 | |
| 		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 | |
| 		usb_anchor_urb(urb, &dev->rx_submitted);
 | |
| 
 | |
| 		err = usb_submit_urb(urb, GFP_KERNEL);
 | |
| 		if (err) {
 | |
| 			usb_unanchor_urb(urb);
 | |
| 			usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf,
 | |
| 					  urb->transfer_dma);
 | |
| 		}
 | |
| 
 | |
| freeurb:
 | |
| 		/* Drop reference, USB core will take care of freeing it */
 | |
| 		usb_free_urb(urb);
 | |
| 		if (err)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	/* Did we submit any URBs */
 | |
| 	if (i == 0) {
 | |
| 		dev_err(dev->udev->dev.parent, "couldn't setup read URBs\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	/* Warn if we've couldn't transmit all the URBs */
 | |
| 	if (i < MAX_RX_URBS) {
 | |
| 		dev_warn(dev->udev->dev.parent,
 | |
| 			 "rx performance may be slow\n");
 | |
| 	}
 | |
| 
 | |
| 	dev->rxinitdone = 1;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Start interface
 | |
|  */
 | |
| static int esd_usb2_start(struct esd_usb2_net_priv *priv)
 | |
| {
 | |
| 	struct esd_usb2 *dev = priv->usb2;
 | |
| 	struct net_device *netdev = priv->netdev;
 | |
| 	struct esd_usb2_msg *msg;
 | |
| 	int err, i;
 | |
| 
 | |
| 	msg = kmalloc(sizeof(*msg), GFP_KERNEL);
 | |
| 	if (!msg) {
 | |
| 		err = -ENOMEM;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Enable all IDs
 | |
| 	 * The IDADD message takes up to 64 32 bit bitmasks (2048 bits).
 | |
| 	 * Each bit represents one 11 bit CAN identifier. A set bit
 | |
| 	 * enables reception of the corresponding CAN identifier. A cleared
 | |
| 	 * bit disabled this identifier. An additional bitmask value
 | |
| 	 * following the CAN 2.0A bits is used to enable reception of
 | |
| 	 * extended CAN frames. Only the LSB of this final mask is checked
 | |
| 	 * for the complete 29 bit ID range. The IDADD message also allows
 | |
| 	 * filter configuration for an ID subset. In this case you can add
 | |
| 	 * the number of the starting bitmask (0..64) to the filter.option
 | |
| 	 * field followed by only some bitmasks.
 | |
| 	 */
 | |
| 	msg->msg.hdr.cmd = CMD_IDADD;
 | |
| 	msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT;
 | |
| 	msg->msg.filter.net = priv->index;
 | |
| 	msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */
 | |
| 	for (i = 0; i < ESD_MAX_ID_SEGMENT; i++)
 | |
| 		msg->msg.filter.mask[i] = cpu_to_le32(0xffffffff);
 | |
| 	/* enable 29bit extended IDs */
 | |
| 	msg->msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001);
 | |
| 
 | |
| 	err = esd_usb2_send_msg(dev, msg);
 | |
| 	if (err)
 | |
| 		goto out;
 | |
| 
 | |
| 	err = esd_usb2_setup_rx_urbs(dev);
 | |
| 	if (err)
 | |
| 		goto out;
 | |
| 
 | |
| 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 | |
| 
 | |
| out:
 | |
| 	if (err == -ENODEV)
 | |
| 		netif_device_detach(netdev);
 | |
| 	if (err)
 | |
| 		netdev_err(netdev, "couldn't start device: %d\n", err);
 | |
| 
 | |
| 	kfree(msg);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static void unlink_all_urbs(struct esd_usb2 *dev)
 | |
| {
 | |
| 	struct esd_usb2_net_priv *priv;
 | |
| 	int i, j;
 | |
| 
 | |
| 	usb_kill_anchored_urbs(&dev->rx_submitted);
 | |
| 	for (i = 0; i < dev->net_count; i++) {
 | |
| 		priv = dev->nets[i];
 | |
| 		if (priv) {
 | |
| 			usb_kill_anchored_urbs(&priv->tx_submitted);
 | |
| 			atomic_set(&priv->active_tx_jobs, 0);
 | |
| 
 | |
| 			for (j = 0; j < MAX_TX_URBS; j++)
 | |
| 				priv->tx_contexts[j].echo_index = MAX_TX_URBS;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int esd_usb2_open(struct net_device *netdev)
 | |
| {
 | |
| 	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
 | |
| 	int err;
 | |
| 
 | |
| 	/* common open */
 | |
| 	err = open_candev(netdev);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	/* finally start device */
 | |
| 	err = esd_usb2_start(priv);
 | |
| 	if (err) {
 | |
| 		netdev_warn(netdev, "couldn't start device: %d\n", err);
 | |
| 		close_candev(netdev);
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	netif_start_queue(netdev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb,
 | |
| 				      struct net_device *netdev)
 | |
| {
 | |
| 	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
 | |
| 	struct esd_usb2 *dev = priv->usb2;
 | |
| 	struct esd_tx_urb_context *context = NULL;
 | |
| 	struct net_device_stats *stats = &netdev->stats;
 | |
| 	struct can_frame *cf = (struct can_frame *)skb->data;
 | |
| 	struct esd_usb2_msg *msg;
 | |
| 	struct urb *urb;
 | |
| 	u8 *buf;
 | |
| 	int i, err;
 | |
| 	int ret = NETDEV_TX_OK;
 | |
| 	size_t size = sizeof(struct esd_usb2_msg);
 | |
| 
 | |
| 	if (can_dropped_invalid_skb(netdev, skb))
 | |
| 		return NETDEV_TX_OK;
 | |
| 
 | |
| 	/* create a URB, and a buffer for it, and copy the data to the URB */
 | |
| 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 | |
| 	if (!urb) {
 | |
| 		stats->tx_dropped++;
 | |
| 		dev_kfree_skb(skb);
 | |
| 		goto nourbmem;
 | |
| 	}
 | |
| 
 | |
| 	buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC,
 | |
| 				 &urb->transfer_dma);
 | |
| 	if (!buf) {
 | |
| 		netdev_err(netdev, "No memory left for USB buffer\n");
 | |
| 		stats->tx_dropped++;
 | |
| 		dev_kfree_skb(skb);
 | |
| 		goto nobufmem;
 | |
| 	}
 | |
| 
 | |
| 	msg = (struct esd_usb2_msg *)buf;
 | |
| 
 | |
| 	msg->msg.hdr.len = 3; /* minimal length */
 | |
| 	msg->msg.hdr.cmd = CMD_CAN_TX;
 | |
| 	msg->msg.tx.net = priv->index;
 | |
| 	msg->msg.tx.dlc = cf->can_dlc;
 | |
| 	msg->msg.tx.id = cpu_to_le32(cf->can_id & CAN_ERR_MASK);
 | |
| 
 | |
| 	if (cf->can_id & CAN_RTR_FLAG)
 | |
| 		msg->msg.tx.dlc |= ESD_RTR;
 | |
| 
 | |
| 	if (cf->can_id & CAN_EFF_FLAG)
 | |
| 		msg->msg.tx.id |= cpu_to_le32(ESD_EXTID);
 | |
| 
 | |
| 	for (i = 0; i < cf->can_dlc; i++)
 | |
| 		msg->msg.tx.data[i] = cf->data[i];
 | |
| 
 | |
| 	msg->msg.hdr.len += (cf->can_dlc + 3) >> 2;
 | |
| 
 | |
| 	for (i = 0; i < MAX_TX_URBS; i++) {
 | |
| 		if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) {
 | |
| 			context = &priv->tx_contexts[i];
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * This may never happen.
 | |
| 	 */
 | |
| 	if (!context) {
 | |
| 		netdev_warn(netdev, "couldn't find free context\n");
 | |
| 		ret = NETDEV_TX_BUSY;
 | |
| 		goto releasebuf;
 | |
| 	}
 | |
| 
 | |
| 	context->priv = priv;
 | |
| 	context->echo_index = i;
 | |
| 	context->dlc = cf->can_dlc;
 | |
| 
 | |
| 	/* hnd must not be 0 - MSB is stripped in txdone handling */
 | |
| 	msg->msg.tx.hnd = 0x80000000 | i; /* returned in TX done message */
 | |
| 
 | |
| 	usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf,
 | |
| 			  msg->msg.hdr.len << 2,
 | |
| 			  esd_usb2_write_bulk_callback, context);
 | |
| 
 | |
| 	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 | |
| 
 | |
| 	usb_anchor_urb(urb, &priv->tx_submitted);
 | |
| 
 | |
| 	can_put_echo_skb(skb, netdev, context->echo_index);
 | |
| 
 | |
| 	atomic_inc(&priv->active_tx_jobs);
 | |
| 
 | |
| 	/* Slow down tx path */
 | |
| 	if (atomic_read(&priv->active_tx_jobs) >= MAX_TX_URBS)
 | |
| 		netif_stop_queue(netdev);
 | |
| 
 | |
| 	err = usb_submit_urb(urb, GFP_ATOMIC);
 | |
| 	if (err) {
 | |
| 		can_free_echo_skb(netdev, context->echo_index);
 | |
| 
 | |
| 		atomic_dec(&priv->active_tx_jobs);
 | |
| 		usb_unanchor_urb(urb);
 | |
| 
 | |
| 		stats->tx_dropped++;
 | |
| 
 | |
| 		if (err == -ENODEV)
 | |
| 			netif_device_detach(netdev);
 | |
| 		else
 | |
| 			netdev_warn(netdev, "failed tx_urb %d\n", err);
 | |
| 
 | |
| 		goto releasebuf;
 | |
| 	}
 | |
| 
 | |
| 	netif_trans_update(netdev);
 | |
| 
 | |
| 	/*
 | |
| 	 * Release our reference to this URB, the USB core will eventually free
 | |
| 	 * it entirely.
 | |
| 	 */
 | |
| 	usb_free_urb(urb);
 | |
| 
 | |
| 	return NETDEV_TX_OK;
 | |
| 
 | |
| releasebuf:
 | |
| 	usb_free_coherent(dev->udev, size, buf, urb->transfer_dma);
 | |
| 
 | |
| nobufmem:
 | |
| 	usb_free_urb(urb);
 | |
| 
 | |
| nourbmem:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int esd_usb2_close(struct net_device *netdev)
 | |
| {
 | |
| 	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
 | |
| 	struct esd_usb2_msg *msg;
 | |
| 	int i;
 | |
| 
 | |
| 	msg = kmalloc(sizeof(*msg), GFP_KERNEL);
 | |
| 	if (!msg)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	/* Disable all IDs (see esd_usb2_start()) */
 | |
| 	msg->msg.hdr.cmd = CMD_IDADD;
 | |
| 	msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT;
 | |
| 	msg->msg.filter.net = priv->index;
 | |
| 	msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */
 | |
| 	for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++)
 | |
| 		msg->msg.filter.mask[i] = 0;
 | |
| 	if (esd_usb2_send_msg(priv->usb2, msg) < 0)
 | |
| 		netdev_err(netdev, "sending idadd message failed\n");
 | |
| 
 | |
| 	/* set CAN controller to reset mode */
 | |
| 	msg->msg.hdr.len = 2;
 | |
| 	msg->msg.hdr.cmd = CMD_SETBAUD;
 | |
| 	msg->msg.setbaud.net = priv->index;
 | |
| 	msg->msg.setbaud.rsvd = 0;
 | |
| 	msg->msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE);
 | |
| 	if (esd_usb2_send_msg(priv->usb2, msg) < 0)
 | |
| 		netdev_err(netdev, "sending setbaud message failed\n");
 | |
| 
 | |
| 	priv->can.state = CAN_STATE_STOPPED;
 | |
| 
 | |
| 	netif_stop_queue(netdev);
 | |
| 
 | |
| 	close_candev(netdev);
 | |
| 
 | |
| 	kfree(msg);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct net_device_ops esd_usb2_netdev_ops = {
 | |
| 	.ndo_open = esd_usb2_open,
 | |
| 	.ndo_stop = esd_usb2_close,
 | |
| 	.ndo_start_xmit = esd_usb2_start_xmit,
 | |
| 	.ndo_change_mtu = can_change_mtu,
 | |
| };
 | |
| 
 | |
| static const struct can_bittiming_const esd_usb2_bittiming_const = {
 | |
| 	.name = "esd_usb2",
 | |
| 	.tseg1_min = ESD_USB2_TSEG1_MIN,
 | |
| 	.tseg1_max = ESD_USB2_TSEG1_MAX,
 | |
| 	.tseg2_min = ESD_USB2_TSEG2_MIN,
 | |
| 	.tseg2_max = ESD_USB2_TSEG2_MAX,
 | |
| 	.sjw_max = ESD_USB2_SJW_MAX,
 | |
| 	.brp_min = ESD_USB2_BRP_MIN,
 | |
| 	.brp_max = ESD_USB2_BRP_MAX,
 | |
| 	.brp_inc = ESD_USB2_BRP_INC,
 | |
| };
 | |
| 
 | |
| static int esd_usb2_set_bittiming(struct net_device *netdev)
 | |
| {
 | |
| 	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
 | |
| 	struct can_bittiming *bt = &priv->can.bittiming;
 | |
| 	struct esd_usb2_msg *msg;
 | |
| 	int err;
 | |
| 	u32 canbtr;
 | |
| 	int sjw_shift;
 | |
| 
 | |
| 	canbtr = ESD_USB2_UBR;
 | |
| 	if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
 | |
| 		canbtr |= ESD_USB2_LOM;
 | |
| 
 | |
| 	canbtr |= (bt->brp - 1) & (ESD_USB2_BRP_MAX - 1);
 | |
| 
 | |
| 	if (le16_to_cpu(priv->usb2->udev->descriptor.idProduct) ==
 | |
| 	    USB_CANUSBM_PRODUCT_ID)
 | |
| 		sjw_shift = ESD_USBM_SJW_SHIFT;
 | |
| 	else
 | |
| 		sjw_shift = ESD_USB2_SJW_SHIFT;
 | |
| 
 | |
| 	canbtr |= ((bt->sjw - 1) & (ESD_USB2_SJW_MAX - 1))
 | |
| 		<< sjw_shift;
 | |
| 	canbtr |= ((bt->prop_seg + bt->phase_seg1 - 1)
 | |
| 		   & (ESD_USB2_TSEG1_MAX - 1))
 | |
| 		<< ESD_USB2_TSEG1_SHIFT;
 | |
| 	canbtr |= ((bt->phase_seg2 - 1) & (ESD_USB2_TSEG2_MAX - 1))
 | |
| 		<< ESD_USB2_TSEG2_SHIFT;
 | |
| 	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
 | |
| 		canbtr |= ESD_USB2_3_SAMPLES;
 | |
| 
 | |
| 	msg = kmalloc(sizeof(*msg), GFP_KERNEL);
 | |
| 	if (!msg)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	msg->msg.hdr.len = 2;
 | |
| 	msg->msg.hdr.cmd = CMD_SETBAUD;
 | |
| 	msg->msg.setbaud.net = priv->index;
 | |
| 	msg->msg.setbaud.rsvd = 0;
 | |
| 	msg->msg.setbaud.baud = cpu_to_le32(canbtr);
 | |
| 
 | |
| 	netdev_info(netdev, "setting BTR=%#x\n", canbtr);
 | |
| 
 | |
| 	err = esd_usb2_send_msg(priv->usb2, msg);
 | |
| 
 | |
| 	kfree(msg);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int esd_usb2_get_berr_counter(const struct net_device *netdev,
 | |
| 				     struct can_berr_counter *bec)
 | |
| {
 | |
| 	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
 | |
| 
 | |
| 	bec->txerr = priv->bec.txerr;
 | |
| 	bec->rxerr = priv->bec.rxerr;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int esd_usb2_set_mode(struct net_device *netdev, enum can_mode mode)
 | |
| {
 | |
| 	switch (mode) {
 | |
| 	case CAN_MODE_START:
 | |
| 		netif_wake_queue(netdev);
 | |
| 		break;
 | |
| 
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int esd_usb2_probe_one_net(struct usb_interface *intf, int index)
 | |
| {
 | |
| 	struct esd_usb2 *dev = usb_get_intfdata(intf);
 | |
| 	struct net_device *netdev;
 | |
| 	struct esd_usb2_net_priv *priv;
 | |
| 	int err = 0;
 | |
| 	int i;
 | |
| 
 | |
| 	netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS);
 | |
| 	if (!netdev) {
 | |
| 		dev_err(&intf->dev, "couldn't alloc candev\n");
 | |
| 		err = -ENOMEM;
 | |
| 		goto done;
 | |
| 	}
 | |
| 
 | |
| 	priv = netdev_priv(netdev);
 | |
| 
 | |
| 	init_usb_anchor(&priv->tx_submitted);
 | |
| 	atomic_set(&priv->active_tx_jobs, 0);
 | |
| 
 | |
| 	for (i = 0; i < MAX_TX_URBS; i++)
 | |
| 		priv->tx_contexts[i].echo_index = MAX_TX_URBS;
 | |
| 
 | |
| 	priv->usb2 = dev;
 | |
| 	priv->netdev = netdev;
 | |
| 	priv->index = index;
 | |
| 
 | |
| 	priv->can.state = CAN_STATE_STOPPED;
 | |
| 	priv->can.ctrlmode_supported = CAN_CTRLMODE_LISTENONLY;
 | |
| 
 | |
| 	if (le16_to_cpu(dev->udev->descriptor.idProduct) ==
 | |
| 	    USB_CANUSBM_PRODUCT_ID)
 | |
| 		priv->can.clock.freq = ESD_USBM_CAN_CLOCK;
 | |
| 	else {
 | |
| 		priv->can.clock.freq = ESD_USB2_CAN_CLOCK;
 | |
| 		priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
 | |
| 	}
 | |
| 
 | |
| 	priv->can.bittiming_const = &esd_usb2_bittiming_const;
 | |
| 	priv->can.do_set_bittiming = esd_usb2_set_bittiming;
 | |
| 	priv->can.do_set_mode = esd_usb2_set_mode;
 | |
| 	priv->can.do_get_berr_counter = esd_usb2_get_berr_counter;
 | |
| 
 | |
| 	netdev->flags |= IFF_ECHO; /* we support local echo */
 | |
| 
 | |
| 	netdev->netdev_ops = &esd_usb2_netdev_ops;
 | |
| 
 | |
| 	SET_NETDEV_DEV(netdev, &intf->dev);
 | |
| 	netdev->dev_id = index;
 | |
| 
 | |
| 	err = register_candev(netdev);
 | |
| 	if (err) {
 | |
| 		dev_err(&intf->dev, "couldn't register CAN device: %d\n", err);
 | |
| 		free_candev(netdev);
 | |
| 		err = -ENOMEM;
 | |
| 		goto done;
 | |
| 	}
 | |
| 
 | |
| 	dev->nets[index] = priv;
 | |
| 	netdev_info(netdev, "device %s registered\n", netdev->name);
 | |
| 
 | |
| done:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * probe function for new USB2 devices
 | |
|  *
 | |
|  * check version information and number of available
 | |
|  * CAN interfaces
 | |
|  */
 | |
| static int esd_usb2_probe(struct usb_interface *intf,
 | |
| 			 const struct usb_device_id *id)
 | |
| {
 | |
| 	struct esd_usb2 *dev;
 | |
| 	struct esd_usb2_msg *msg;
 | |
| 	int i, err;
 | |
| 
 | |
| 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 | |
| 	if (!dev) {
 | |
| 		err = -ENOMEM;
 | |
| 		goto done;
 | |
| 	}
 | |
| 
 | |
| 	dev->udev = interface_to_usbdev(intf);
 | |
| 
 | |
| 	init_usb_anchor(&dev->rx_submitted);
 | |
| 
 | |
| 	usb_set_intfdata(intf, dev);
 | |
| 
 | |
| 	msg = kmalloc(sizeof(*msg), GFP_KERNEL);
 | |
| 	if (!msg) {
 | |
| 		err = -ENOMEM;
 | |
| 		goto free_msg;
 | |
| 	}
 | |
| 
 | |
| 	/* query number of CAN interfaces (nets) */
 | |
| 	msg->msg.hdr.cmd = CMD_VERSION;
 | |
| 	msg->msg.hdr.len = 2;
 | |
| 	msg->msg.version.rsvd = 0;
 | |
| 	msg->msg.version.flags = 0;
 | |
| 	msg->msg.version.drv_version = 0;
 | |
| 
 | |
| 	err = esd_usb2_send_msg(dev, msg);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(&intf->dev, "sending version message failed\n");
 | |
| 		goto free_msg;
 | |
| 	}
 | |
| 
 | |
| 	err = esd_usb2_wait_msg(dev, msg);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(&intf->dev, "no version message answer\n");
 | |
| 		goto free_msg;
 | |
| 	}
 | |
| 
 | |
| 	dev->net_count = (int)msg->msg.version_reply.nets;
 | |
| 	dev->version = le32_to_cpu(msg->msg.version_reply.version);
 | |
| 
 | |
| 	if (device_create_file(&intf->dev, &dev_attr_firmware))
 | |
| 		dev_err(&intf->dev,
 | |
| 			"Couldn't create device file for firmware\n");
 | |
| 
 | |
| 	if (device_create_file(&intf->dev, &dev_attr_hardware))
 | |
| 		dev_err(&intf->dev,
 | |
| 			"Couldn't create device file for hardware\n");
 | |
| 
 | |
| 	if (device_create_file(&intf->dev, &dev_attr_nets))
 | |
| 		dev_err(&intf->dev,
 | |
| 			"Couldn't create device file for nets\n");
 | |
| 
 | |
| 	/* do per device probing */
 | |
| 	for (i = 0; i < dev->net_count; i++)
 | |
| 		esd_usb2_probe_one_net(intf, i);
 | |
| 
 | |
| free_msg:
 | |
| 	kfree(msg);
 | |
| 	if (err)
 | |
| 		kfree(dev);
 | |
| done:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * called by the usb core when the device is removed from the system
 | |
|  */
 | |
| static void esd_usb2_disconnect(struct usb_interface *intf)
 | |
| {
 | |
| 	struct esd_usb2 *dev = usb_get_intfdata(intf);
 | |
| 	struct net_device *netdev;
 | |
| 	int i;
 | |
| 
 | |
| 	device_remove_file(&intf->dev, &dev_attr_firmware);
 | |
| 	device_remove_file(&intf->dev, &dev_attr_hardware);
 | |
| 	device_remove_file(&intf->dev, &dev_attr_nets);
 | |
| 
 | |
| 	usb_set_intfdata(intf, NULL);
 | |
| 
 | |
| 	if (dev) {
 | |
| 		for (i = 0; i < dev->net_count; i++) {
 | |
| 			if (dev->nets[i]) {
 | |
| 				netdev = dev->nets[i]->netdev;
 | |
| 				unregister_netdev(netdev);
 | |
| 				free_candev(netdev);
 | |
| 			}
 | |
| 		}
 | |
| 		unlink_all_urbs(dev);
 | |
| 		kfree(dev);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* usb specific object needed to register this driver with the usb subsystem */
 | |
| static struct usb_driver esd_usb2_driver = {
 | |
| 	.name = "esd_usb2",
 | |
| 	.probe = esd_usb2_probe,
 | |
| 	.disconnect = esd_usb2_disconnect,
 | |
| 	.id_table = esd_usb2_table,
 | |
| };
 | |
| 
 | |
| module_usb_driver(esd_usb2_driver);
 | 
