961 lines
21 KiB
C
961 lines
21 KiB
C
/*
|
|
* Copyright (C) 2007-2010 ST-Ericsson
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
* Low-level core for exclusive access to the AB3100 IC on the I2C bus
|
|
* and some basic chip-configuration.
|
|
* Author: Linus Walleij <linus.walleij@stericsson.com>
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/list.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/random.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/ab3100.h>
|
|
#include <linux/mfd/abx500.h>
|
|
|
|
/* These are the only registers inside AB3100 used in this main file */
|
|
|
|
/* Interrupt event registers */
|
|
#define AB3100_EVENTA1 0x21
|
|
#define AB3100_EVENTA2 0x22
|
|
#define AB3100_EVENTA3 0x23
|
|
|
|
/* AB3100 DAC converter registers */
|
|
#define AB3100_DIS 0x00
|
|
#define AB3100_D0C 0x01
|
|
#define AB3100_D1C 0x02
|
|
#define AB3100_D2C 0x03
|
|
#define AB3100_D3C 0x04
|
|
|
|
/* Chip ID register */
|
|
#define AB3100_CID 0x20
|
|
|
|
/* AB3100 interrupt registers */
|
|
#define AB3100_IMRA1 0x24
|
|
#define AB3100_IMRA2 0x25
|
|
#define AB3100_IMRA3 0x26
|
|
#define AB3100_IMRB1 0x2B
|
|
#define AB3100_IMRB2 0x2C
|
|
#define AB3100_IMRB3 0x2D
|
|
|
|
/* System Power Monitoring and control registers */
|
|
#define AB3100_MCA 0x2E
|
|
#define AB3100_MCB 0x2F
|
|
|
|
/* SIM power up */
|
|
#define AB3100_SUP 0x50
|
|
|
|
/*
|
|
* I2C communication
|
|
*
|
|
* The AB3100 is usually assigned address 0x48 (7-bit)
|
|
* The chip is defined in the platform i2c_board_data section.
|
|
*/
|
|
static int ab3100_get_chip_id(struct device *dev)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
return (int)ab3100->chip_id;
|
|
}
|
|
|
|
static int ab3100_set_register_interruptible(struct ab3100 *ab3100,
|
|
u8 reg, u8 regval)
|
|
{
|
|
u8 regandval[2] = {reg, regval};
|
|
int err;
|
|
|
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* A two-byte write message with the first byte containing the register
|
|
* number and the second byte containing the value to be written
|
|
* effectively sets a register in the AB3100.
|
|
*/
|
|
err = i2c_master_send(ab3100->i2c_client, regandval, 2);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write register): %d\n",
|
|
err);
|
|
} else if (err != 2) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write register)\n"
|
|
" %d bytes transferred (expected 2)\n",
|
|
err);
|
|
err = -EIO;
|
|
} else {
|
|
/* All is well */
|
|
err = 0;
|
|
}
|
|
mutex_unlock(&ab3100->access_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int set_register_interruptible(struct device *dev,
|
|
u8 bank, u8 reg, u8 value)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
return ab3100_set_register_interruptible(ab3100, reg, value);
|
|
}
|
|
|
|
/*
|
|
* The test registers exist at an I2C bus address up one
|
|
* from the ordinary base. They are not supposed to be used
|
|
* in production code, but sometimes you have to do that
|
|
* anyway. It's currently only used from this file so declare
|
|
* it static and do not export.
|
|
*/
|
|
static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100,
|
|
u8 reg, u8 regval)
|
|
{
|
|
u8 regandval[2] = {reg, regval};
|
|
int err;
|
|
|
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
|
if (err)
|
|
return err;
|
|
|
|
err = i2c_master_send(ab3100->testreg_client, regandval, 2);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write test register): %d\n",
|
|
err);
|
|
} else if (err != 2) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write test register)\n"
|
|
" %d bytes transferred (expected 2)\n",
|
|
err);
|
|
err = -EIO;
|
|
} else {
|
|
/* All is well */
|
|
err = 0;
|
|
}
|
|
mutex_unlock(&ab3100->access_mutex);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ab3100_get_register_interruptible(struct ab3100 *ab3100,
|
|
u8 reg, u8 *regval)
|
|
{
|
|
int err;
|
|
|
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* AB3100 require an I2C "stop" command between each message, else
|
|
* it will not work. The only way of achieveing this with the
|
|
* message transport layer is to send the read and write messages
|
|
* separately.
|
|
*/
|
|
err = i2c_master_send(ab3100->i2c_client, ®, 1);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (send register address): %d\n",
|
|
err);
|
|
goto get_reg_out_unlock;
|
|
} else if (err != 1) {
|
|
dev_err(ab3100->dev,
|
|
"write error (send register address)\n"
|
|
" %d bytes transferred (expected 1)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_reg_out_unlock;
|
|
} else {
|
|
/* All is well */
|
|
err = 0;
|
|
}
|
|
|
|
err = i2c_master_recv(ab3100->i2c_client, regval, 1);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (read register): %d\n",
|
|
err);
|
|
goto get_reg_out_unlock;
|
|
} else if (err != 1) {
|
|
dev_err(ab3100->dev,
|
|
"write error (read register)\n"
|
|
" %d bytes transferred (expected 1)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_reg_out_unlock;
|
|
} else {
|
|
/* All is well */
|
|
err = 0;
|
|
}
|
|
|
|
get_reg_out_unlock:
|
|
mutex_unlock(&ab3100->access_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int get_register_interruptible(struct device *dev, u8 bank, u8 reg,
|
|
u8 *value)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
return ab3100_get_register_interruptible(ab3100, reg, value);
|
|
}
|
|
|
|
static int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
|
|
u8 first_reg, u8 *regvals, u8 numregs)
|
|
{
|
|
int err;
|
|
|
|
if (ab3100->chip_id == 0xa0 ||
|
|
ab3100->chip_id == 0xa1)
|
|
/* These don't support paged reads */
|
|
return -EIO;
|
|
|
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* Paged read also require an I2C "stop" command.
|
|
*/
|
|
err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (send first register address): %d\n",
|
|
err);
|
|
goto get_reg_page_out_unlock;
|
|
} else if (err != 1) {
|
|
dev_err(ab3100->dev,
|
|
"write error (send first register address)\n"
|
|
" %d bytes transferred (expected 1)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_reg_page_out_unlock;
|
|
}
|
|
|
|
err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (read register page): %d\n",
|
|
err);
|
|
goto get_reg_page_out_unlock;
|
|
} else if (err != numregs) {
|
|
dev_err(ab3100->dev,
|
|
"write error (read register page)\n"
|
|
" %d bytes transferred (expected %d)\n",
|
|
err, numregs);
|
|
err = -EIO;
|
|
goto get_reg_page_out_unlock;
|
|
}
|
|
|
|
/* All is well */
|
|
err = 0;
|
|
|
|
get_reg_page_out_unlock:
|
|
mutex_unlock(&ab3100->access_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int get_register_page_interruptible(struct device *dev, u8 bank,
|
|
u8 first_reg, u8 *regvals, u8 numregs)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
return ab3100_get_register_page_interruptible(ab3100,
|
|
first_reg, regvals, numregs);
|
|
}
|
|
|
|
static int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
|
|
u8 reg, u8 andmask, u8 ormask)
|
|
{
|
|
u8 regandval[2] = {reg, 0};
|
|
int err;
|
|
|
|
err = mutex_lock_interruptible(&ab3100->access_mutex);
|
|
if (err)
|
|
return err;
|
|
|
|
/* First read out the target register */
|
|
err = i2c_master_send(ab3100->i2c_client, ®, 1);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (maskset send address): %d\n",
|
|
err);
|
|
goto get_maskset_unlock;
|
|
} else if (err != 1) {
|
|
dev_err(ab3100->dev,
|
|
"write error (maskset send address)\n"
|
|
" %d bytes transferred (expected 1)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_maskset_unlock;
|
|
}
|
|
|
|
err = i2c_master_recv(ab3100->i2c_client, ®andval[1], 1);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (maskset read register): %d\n",
|
|
err);
|
|
goto get_maskset_unlock;
|
|
} else if (err != 1) {
|
|
dev_err(ab3100->dev,
|
|
"write error (maskset read register)\n"
|
|
" %d bytes transferred (expected 1)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_maskset_unlock;
|
|
}
|
|
|
|
/* Modify the register */
|
|
regandval[1] &= andmask;
|
|
regandval[1] |= ormask;
|
|
|
|
/* Write the register */
|
|
err = i2c_master_send(ab3100->i2c_client, regandval, 2);
|
|
if (err < 0) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write register): %d\n",
|
|
err);
|
|
goto get_maskset_unlock;
|
|
} else if (err != 2) {
|
|
dev_err(ab3100->dev,
|
|
"write error (write register)\n"
|
|
" %d bytes transferred (expected 2)\n",
|
|
err);
|
|
err = -EIO;
|
|
goto get_maskset_unlock;
|
|
}
|
|
|
|
/* All is well */
|
|
err = 0;
|
|
|
|
get_maskset_unlock:
|
|
mutex_unlock(&ab3100->access_mutex);
|
|
return err;
|
|
}
|
|
|
|
static int mask_and_set_register_interruptible(struct device *dev, u8 bank,
|
|
u8 reg, u8 bitmask, u8 bitvalues)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
return ab3100_mask_and_set_register_interruptible(ab3100,
|
|
reg, bitmask, (bitmask & bitvalues));
|
|
}
|
|
|
|
/*
|
|
* Register a simple callback for handling any AB3100 events.
|
|
*/
|
|
int ab3100_event_register(struct ab3100 *ab3100,
|
|
struct notifier_block *nb)
|
|
{
|
|
return blocking_notifier_chain_register(&ab3100->event_subscribers,
|
|
nb);
|
|
}
|
|
EXPORT_SYMBOL(ab3100_event_register);
|
|
|
|
/*
|
|
* Remove a previously registered callback.
|
|
*/
|
|
int ab3100_event_unregister(struct ab3100 *ab3100,
|
|
struct notifier_block *nb)
|
|
{
|
|
return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
|
|
nb);
|
|
}
|
|
EXPORT_SYMBOL(ab3100_event_unregister);
|
|
|
|
|
|
static int ab3100_event_registers_startup_state_get(struct device *dev,
|
|
u8 *event)
|
|
{
|
|
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
|
|
|
|
if (!ab3100->startup_events_read)
|
|
return -EAGAIN; /* Try again later */
|
|
memcpy(event, ab3100->startup_events, 3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct abx500_ops ab3100_ops = {
|
|
.get_chip_id = ab3100_get_chip_id,
|
|
.set_register = set_register_interruptible,
|
|
.get_register = get_register_interruptible,
|
|
.get_register_page = get_register_page_interruptible,
|
|
.set_register_page = NULL,
|
|
.mask_and_set_register = mask_and_set_register_interruptible,
|
|
.event_registers_startup_state_get =
|
|
ab3100_event_registers_startup_state_get,
|
|
.startup_irq_enabled = NULL,
|
|
};
|
|
|
|
/*
|
|
* This is a threaded interrupt handler so we can make some
|
|
* I2C calls etc.
|
|
*/
|
|
static irqreturn_t ab3100_irq_handler(int irq, void *data)
|
|
{
|
|
struct ab3100 *ab3100 = data;
|
|
u8 event_regs[3];
|
|
u32 fatevent;
|
|
int err;
|
|
|
|
err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
|
|
event_regs, 3);
|
|
if (err)
|
|
goto err_event;
|
|
|
|
fatevent = (event_regs[0] << 16) |
|
|
(event_regs[1] << 8) |
|
|
event_regs[2];
|
|
|
|
if (!ab3100->startup_events_read) {
|
|
ab3100->startup_events[0] = event_regs[0];
|
|
ab3100->startup_events[1] = event_regs[1];
|
|
ab3100->startup_events[2] = event_regs[2];
|
|
ab3100->startup_events_read = true;
|
|
}
|
|
/*
|
|
* The notified parties will have to mask out the events
|
|
* they're interested in and react to them. They will be
|
|
* notified on all events, then they use the fatevent value
|
|
* to determine if they're interested.
|
|
*/
|
|
blocking_notifier_call_chain(&ab3100->event_subscribers,
|
|
fatevent, NULL);
|
|
|
|
dev_dbg(ab3100->dev,
|
|
"IRQ Event: 0x%08x\n", fatevent);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
err_event:
|
|
dev_dbg(ab3100->dev,
|
|
"error reading event status\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
/*
|
|
* Some debugfs entries only exposed if we're using debug
|
|
*/
|
|
static int ab3100_registers_print(struct seq_file *s, void *p)
|
|
{
|
|
struct ab3100 *ab3100 = s->private;
|
|
u8 value;
|
|
u8 reg;
|
|
|
|
seq_puts(s, "AB3100 registers:\n");
|
|
|
|
for (reg = 0; reg < 0xff; reg++) {
|
|
ab3100_get_register_interruptible(ab3100, reg, &value);
|
|
seq_printf(s, "[0x%x]: 0x%x\n", reg, value);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int ab3100_registers_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, ab3100_registers_print, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations ab3100_registers_fops = {
|
|
.open = ab3100_registers_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
struct ab3100_get_set_reg_priv {
|
|
struct ab3100 *ab3100;
|
|
bool mode;
|
|
};
|
|
|
|
static ssize_t ab3100_get_set_reg(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ab3100_get_set_reg_priv *priv = file->private_data;
|
|
struct ab3100 *ab3100 = priv->ab3100;
|
|
char buf[32];
|
|
ssize_t buf_size;
|
|
int regp;
|
|
u8 user_reg;
|
|
int err;
|
|
int i = 0;
|
|
|
|
/* Get userspace string and assure termination */
|
|
buf_size = min(count, (sizeof(buf)-1));
|
|
if (copy_from_user(buf, user_buf, buf_size))
|
|
return -EFAULT;
|
|
buf[buf_size] = 0;
|
|
|
|
/*
|
|
* The idea is here to parse a string which is either
|
|
* "0xnn" for reading a register, or "0xaa 0xbb" for
|
|
* writing 0xbb to the register 0xaa. First move past
|
|
* whitespace and then begin to parse the register.
|
|
*/
|
|
while ((i < buf_size) && (buf[i] == ' '))
|
|
i++;
|
|
regp = i;
|
|
|
|
/*
|
|
* Advance pointer to end of string then terminate
|
|
* the register string. This is needed to satisfy
|
|
* the kstrtou8() function.
|
|
*/
|
|
while ((i < buf_size) && (buf[i] != ' '))
|
|
i++;
|
|
buf[i] = '\0';
|
|
|
|
err = kstrtou8(&buf[regp], 16, &user_reg);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Either we read or we write a register here */
|
|
if (!priv->mode) {
|
|
/* Reading */
|
|
u8 regvalue;
|
|
|
|
ab3100_get_register_interruptible(ab3100, user_reg, ®value);
|
|
|
|
dev_info(ab3100->dev,
|
|
"debug read AB3100 reg[0x%02x]: 0x%02x\n",
|
|
user_reg, regvalue);
|
|
} else {
|
|
int valp;
|
|
u8 user_value;
|
|
u8 regvalue;
|
|
|
|
/*
|
|
* Writing, we need some value to write to
|
|
* the register so keep parsing the string
|
|
* from userspace.
|
|
*/
|
|
i++;
|
|
while ((i < buf_size) && (buf[i] == ' '))
|
|
i++;
|
|
valp = i;
|
|
while ((i < buf_size) && (buf[i] != ' '))
|
|
i++;
|
|
buf[i] = '\0';
|
|
|
|
err = kstrtou8(&buf[valp], 16, &user_value);
|
|
if (err)
|
|
return err;
|
|
|
|
ab3100_set_register_interruptible(ab3100, user_reg, user_value);
|
|
ab3100_get_register_interruptible(ab3100, user_reg, ®value);
|
|
|
|
dev_info(ab3100->dev,
|
|
"debug write reg[0x%02x]\n"
|
|
" with 0x%02x, after readback: 0x%02x\n",
|
|
user_reg, user_value, regvalue);
|
|
}
|
|
return buf_size;
|
|
}
|
|
|
|
static const struct file_operations ab3100_get_set_reg_fops = {
|
|
.open = simple_open,
|
|
.write = ab3100_get_set_reg,
|
|
.llseek = noop_llseek,
|
|
};
|
|
|
|
static struct dentry *ab3100_dir;
|
|
static struct dentry *ab3100_reg_file;
|
|
static struct ab3100_get_set_reg_priv ab3100_get_priv;
|
|
static struct dentry *ab3100_get_reg_file;
|
|
static struct ab3100_get_set_reg_priv ab3100_set_priv;
|
|
static struct dentry *ab3100_set_reg_file;
|
|
|
|
static void ab3100_setup_debugfs(struct ab3100 *ab3100)
|
|
{
|
|
int err;
|
|
|
|
ab3100_dir = debugfs_create_dir("ab3100", NULL);
|
|
if (!ab3100_dir)
|
|
goto exit_no_debugfs;
|
|
|
|
ab3100_reg_file = debugfs_create_file("registers",
|
|
S_IRUGO, ab3100_dir, ab3100,
|
|
&ab3100_registers_fops);
|
|
if (!ab3100_reg_file) {
|
|
err = -ENOMEM;
|
|
goto exit_destroy_dir;
|
|
}
|
|
|
|
ab3100_get_priv.ab3100 = ab3100;
|
|
ab3100_get_priv.mode = false;
|
|
ab3100_get_reg_file = debugfs_create_file("get_reg",
|
|
S_IWUSR, ab3100_dir, &ab3100_get_priv,
|
|
&ab3100_get_set_reg_fops);
|
|
if (!ab3100_get_reg_file) {
|
|
err = -ENOMEM;
|
|
goto exit_destroy_reg;
|
|
}
|
|
|
|
ab3100_set_priv.ab3100 = ab3100;
|
|
ab3100_set_priv.mode = true;
|
|
ab3100_set_reg_file = debugfs_create_file("set_reg",
|
|
S_IWUSR, ab3100_dir, &ab3100_set_priv,
|
|
&ab3100_get_set_reg_fops);
|
|
if (!ab3100_set_reg_file) {
|
|
err = -ENOMEM;
|
|
goto exit_destroy_get_reg;
|
|
}
|
|
return;
|
|
|
|
exit_destroy_get_reg:
|
|
debugfs_remove(ab3100_get_reg_file);
|
|
exit_destroy_reg:
|
|
debugfs_remove(ab3100_reg_file);
|
|
exit_destroy_dir:
|
|
debugfs_remove(ab3100_dir);
|
|
exit_no_debugfs:
|
|
return;
|
|
}
|
|
#else
|
|
static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Basic set-up, datastructure creation/destruction and I2C interface.
|
|
* This sets up a default config in the AB3100 chip so that it
|
|
* will work as expected.
|
|
*/
|
|
|
|
struct ab3100_init_setting {
|
|
u8 abreg;
|
|
u8 setting;
|
|
};
|
|
|
|
static const struct ab3100_init_setting ab3100_init_settings[] = {
|
|
{
|
|
.abreg = AB3100_MCA,
|
|
.setting = 0x01
|
|
}, {
|
|
.abreg = AB3100_MCB,
|
|
.setting = 0x30
|
|
}, {
|
|
.abreg = AB3100_IMRA1,
|
|
.setting = 0x00
|
|
}, {
|
|
.abreg = AB3100_IMRA2,
|
|
.setting = 0xFF
|
|
}, {
|
|
.abreg = AB3100_IMRA3,
|
|
.setting = 0x01
|
|
}, {
|
|
.abreg = AB3100_IMRB1,
|
|
.setting = 0xBF
|
|
}, {
|
|
.abreg = AB3100_IMRB2,
|
|
.setting = 0xFF
|
|
}, {
|
|
.abreg = AB3100_IMRB3,
|
|
.setting = 0xFF
|
|
}, {
|
|
.abreg = AB3100_SUP,
|
|
.setting = 0x00
|
|
}, {
|
|
.abreg = AB3100_DIS,
|
|
.setting = 0xF0
|
|
}, {
|
|
.abreg = AB3100_D0C,
|
|
.setting = 0x00
|
|
}, {
|
|
.abreg = AB3100_D1C,
|
|
.setting = 0x00
|
|
}, {
|
|
.abreg = AB3100_D2C,
|
|
.setting = 0x00
|
|
}, {
|
|
.abreg = AB3100_D3C,
|
|
.setting = 0x00
|
|
},
|
|
};
|
|
|
|
static int ab3100_setup(struct ab3100 *ab3100)
|
|
{
|
|
int err = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
|
|
err = ab3100_set_register_interruptible(ab3100,
|
|
ab3100_init_settings[i].abreg,
|
|
ab3100_init_settings[i].setting);
|
|
if (err)
|
|
goto exit_no_setup;
|
|
}
|
|
|
|
/*
|
|
* Special trick to make the AB3100 use the 32kHz clock (RTC)
|
|
* bit 3 in test register 0x02 is a special, undocumented test
|
|
* register bit that only exist in AB3100 P1E
|
|
*/
|
|
if (ab3100->chip_id == 0xc4) {
|
|
dev_warn(ab3100->dev,
|
|
"AB3100 P1E variant detected forcing chip to 32KHz\n");
|
|
err = ab3100_set_test_register_interruptible(ab3100,
|
|
0x02, 0x08);
|
|
}
|
|
|
|
exit_no_setup:
|
|
return err;
|
|
}
|
|
|
|
/* The subdevices of the AB3100 */
|
|
static struct mfd_cell ab3100_devs[] = {
|
|
{
|
|
.name = "ab3100-dac",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-leds",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-power",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-regulators",
|
|
.of_compatible = "stericsson,ab3100-regulators",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-sim",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-uart",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-rtc",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-charger",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-boost",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-adc",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-fuelgauge",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-vibrator",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-otp",
|
|
.id = -1,
|
|
},
|
|
{
|
|
.name = "ab3100-codec",
|
|
.id = -1,
|
|
},
|
|
};
|
|
|
|
struct ab_family_id {
|
|
u8 id;
|
|
char *name;
|
|
};
|
|
|
|
static const struct ab_family_id ids[] = {
|
|
/* AB3100 */
|
|
{
|
|
.id = 0xc0,
|
|
.name = "P1A"
|
|
}, {
|
|
.id = 0xc1,
|
|
.name = "P1B"
|
|
}, {
|
|
.id = 0xc2,
|
|
.name = "P1C"
|
|
}, {
|
|
.id = 0xc3,
|
|
.name = "P1D"
|
|
}, {
|
|
.id = 0xc4,
|
|
.name = "P1E"
|
|
}, {
|
|
.id = 0xc5,
|
|
.name = "P1F/R1A"
|
|
}, {
|
|
.id = 0xc6,
|
|
.name = "P1G/R1A"
|
|
}, {
|
|
.id = 0xc7,
|
|
.name = "P2A/R2A"
|
|
}, {
|
|
.id = 0xc8,
|
|
.name = "P2B/R2B"
|
|
},
|
|
/* AB3000 variants, not supported */
|
|
{
|
|
.id = 0xa0
|
|
}, {
|
|
.id = 0xa1
|
|
}, {
|
|
.id = 0xa2
|
|
}, {
|
|
.id = 0xa3
|
|
}, {
|
|
.id = 0xa4
|
|
}, {
|
|
.id = 0xa5
|
|
}, {
|
|
.id = 0xa6
|
|
}, {
|
|
.id = 0xa7
|
|
},
|
|
/* Terminator */
|
|
{
|
|
.id = 0x00,
|
|
},
|
|
};
|
|
|
|
static int ab3100_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ab3100 *ab3100;
|
|
struct ab3100_platform_data *ab3100_plf_data =
|
|
dev_get_platdata(&client->dev);
|
|
int err;
|
|
int i;
|
|
|
|
ab3100 = devm_kzalloc(&client->dev, sizeof(struct ab3100), GFP_KERNEL);
|
|
if (!ab3100)
|
|
return -ENOMEM;
|
|
|
|
/* Initialize data structure */
|
|
mutex_init(&ab3100->access_mutex);
|
|
BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
|
|
|
|
ab3100->i2c_client = client;
|
|
ab3100->dev = &ab3100->i2c_client->dev;
|
|
|
|
i2c_set_clientdata(client, ab3100);
|
|
|
|
/* Read chip ID register */
|
|
err = ab3100_get_register_interruptible(ab3100, AB3100_CID,
|
|
&ab3100->chip_id);
|
|
if (err) {
|
|
dev_err(&client->dev,
|
|
"failed to communicate with AB3100 chip\n");
|
|
goto exit_no_detect;
|
|
}
|
|
|
|
for (i = 0; ids[i].id != 0x0; i++) {
|
|
if (ids[i].id == ab3100->chip_id) {
|
|
if (ids[i].name)
|
|
break;
|
|
|
|
dev_err(&client->dev, "AB3000 is not supported\n");
|
|
goto exit_no_detect;
|
|
}
|
|
}
|
|
|
|
snprintf(&ab3100->chip_name[0],
|
|
sizeof(ab3100->chip_name) - 1, "AB3100 %s", ids[i].name);
|
|
|
|
if (ids[i].id == 0x0) {
|
|
dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
|
|
ab3100->chip_id);
|
|
dev_err(&client->dev,
|
|
"accepting it anyway. Please update the driver.\n");
|
|
goto exit_no_detect;
|
|
}
|
|
|
|
dev_info(&client->dev, "Detected chip: %s\n",
|
|
&ab3100->chip_name[0]);
|
|
|
|
/* Attach a second dummy i2c_client to the test register address */
|
|
ab3100->testreg_client = i2c_new_dummy(client->adapter,
|
|
client->addr + 1);
|
|
if (!ab3100->testreg_client) {
|
|
err = -ENOMEM;
|
|
goto exit_no_testreg_client;
|
|
}
|
|
|
|
err = ab3100_setup(ab3100);
|
|
if (err)
|
|
goto exit_no_setup;
|
|
|
|
err = devm_request_threaded_irq(&client->dev,
|
|
client->irq, NULL, ab3100_irq_handler,
|
|
IRQF_ONESHOT, "ab3100-core", ab3100);
|
|
if (err)
|
|
goto exit_no_irq;
|
|
|
|
err = abx500_register_ops(&client->dev, &ab3100_ops);
|
|
if (err)
|
|
goto exit_no_ops;
|
|
|
|
/* Set up and register the platform devices. */
|
|
for (i = 0; i < ARRAY_SIZE(ab3100_devs); i++) {
|
|
ab3100_devs[i].platform_data = ab3100_plf_data;
|
|
ab3100_devs[i].pdata_size = sizeof(struct ab3100_platform_data);
|
|
}
|
|
|
|
err = mfd_add_devices(&client->dev, 0, ab3100_devs,
|
|
ARRAY_SIZE(ab3100_devs), NULL, 0, NULL);
|
|
|
|
ab3100_setup_debugfs(ab3100);
|
|
|
|
return 0;
|
|
|
|
exit_no_ops:
|
|
exit_no_irq:
|
|
exit_no_setup:
|
|
i2c_unregister_device(ab3100->testreg_client);
|
|
exit_no_testreg_client:
|
|
exit_no_detect:
|
|
return err;
|
|
}
|
|
|
|
static const struct i2c_device_id ab3100_id[] = {
|
|
{ "ab3100", 0 },
|
|
{ }
|
|
};
|
|
|
|
static struct i2c_driver ab3100_driver = {
|
|
.driver = {
|
|
.name = "ab3100",
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.id_table = ab3100_id,
|
|
.probe = ab3100_probe,
|
|
};
|
|
|
|
static int __init ab3100_i2c_init(void)
|
|
{
|
|
return i2c_add_driver(&ab3100_driver);
|
|
}
|
|
subsys_initcall(ab3100_i2c_init);
|