209 lines
		
	
	
		
			5.6 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			209 lines
		
	
	
		
			5.6 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /* SPDX-License-Identifier: GPL-2.0+ */
 | |
| /*
 | |
|  * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
 | |
|  */
 | |
| 
 | |
| #ifndef __MXC_NAND_H
 | |
| #define __MXC_NAND_H
 | |
| 
 | |
| /*
 | |
|  * Register map and bit definitions for the Freescale NAND Flash Controller
 | |
|  * present in various i.MX devices.
 | |
|  *
 | |
|  * MX31 and MX27 have version 1, which has:
 | |
|  *	4 512-byte main buffers and
 | |
|  *	4 16-byte spare buffers
 | |
|  *	to support up to 2K byte pagesize nand.
 | |
|  *	Reading or writing a 2K page requires 4 FDI/FDO cycles.
 | |
|  *
 | |
|  * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
 | |
|  * have:
 | |
|  *	8 512-byte main buffers and
 | |
|  *	8 64-byte spare buffers
 | |
|  *	to support up to 4K byte pagesize nand.
 | |
|  *	Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
 | |
|  *	Also some of registers are moved and/or changed meaning as seen below.
 | |
|  */
 | |
| #if defined(CONFIG_MX27) || defined(CONFIG_MX31)
 | |
| #define MXC_NFC_V1
 | |
| #define is_mxc_nfc_1()		1
 | |
| #define is_mxc_nfc_21()		0
 | |
| #define is_mxc_nfc_32()		0
 | |
| #elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
 | |
| #define MXC_NFC_V2_1
 | |
| #define is_mxc_nfc_1()		0
 | |
| #define is_mxc_nfc_21()		1
 | |
| #define is_mxc_nfc_32()		0
 | |
| #elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
 | |
| #define MXC_NFC_V3
 | |
| #define MXC_NFC_V3_2
 | |
| #define is_mxc_nfc_1()		0
 | |
| #define is_mxc_nfc_21()		0
 | |
| #define is_mxc_nfc_32()		1
 | |
| #else
 | |
| #error "MXC NFC implementation not supported"
 | |
| #endif
 | |
| #define is_mxc_nfc_3()		is_mxc_nfc_32()
 | |
| 
 | |
| #if defined(MXC_NFC_V1)
 | |
| #define NAND_MXC_NR_BUFS		4
 | |
| #define NAND_MXC_SPARE_BUF_SIZE		16
 | |
| #define NAND_MXC_REG_OFFSET		0xe00
 | |
| #define NAND_MXC_2K_MULTI_CYCLE
 | |
| #elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 | |
| #define NAND_MXC_NR_BUFS		8
 | |
| #define NAND_MXC_SPARE_BUF_SIZE		64
 | |
| #define NAND_MXC_REG_OFFSET		0x1e00
 | |
| #endif
 | |
| 
 | |
| struct mxc_nand_regs {
 | |
| 	u8 main_area[NAND_MXC_NR_BUFS][0x200];
 | |
| 	u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
 | |
| 	/*
 | |
| 	 * reserved size is offset of nfc registers
 | |
| 	 * minus total main and spare sizes
 | |
| 	 */
 | |
| 	u8 reserved1[NAND_MXC_REG_OFFSET
 | |
| 		- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
 | |
| #if defined(MXC_NFC_V1)
 | |
| 	u16 buf_size;
 | |
| 	u16 reserved2;
 | |
| 	u16 buf_addr;
 | |
| 	u16 flash_addr;
 | |
| 	u16 flash_cmd;
 | |
| 	u16 config;
 | |
| 	u16 ecc_status_result;
 | |
| 	u16 rsltmain_area;
 | |
| 	u16 rsltspare_area;
 | |
| 	u16 wrprot;
 | |
| 	u16 unlockstart_blkaddr;
 | |
| 	u16 unlockend_blkaddr;
 | |
| 	u16 nf_wrprst;
 | |
| 	u16 config1;
 | |
| 	u16 config2;
 | |
| #elif defined(MXC_NFC_V2_1)
 | |
| 	u16 reserved2[2];
 | |
| 	u16 buf_addr;
 | |
| 	u16 flash_addr;
 | |
| 	u16 flash_cmd;
 | |
| 	u16 config;
 | |
| 	u32 ecc_status_result;
 | |
| 	u16 spare_area_size;
 | |
| 	u16 wrprot;
 | |
| 	u16 reserved3[2];
 | |
| 	u16 nf_wrprst;
 | |
| 	u16 config1;
 | |
| 	u16 config2;
 | |
| 	u16 reserved4;
 | |
| 	u16 unlockstart_blkaddr;
 | |
| 	u16 unlockend_blkaddr;
 | |
| 	u16 unlockstart_blkaddr1;
 | |
| 	u16 unlockend_blkaddr1;
 | |
| 	u16 unlockstart_blkaddr2;
 | |
| 	u16 unlockend_blkaddr2;
 | |
| 	u16 unlockstart_blkaddr3;
 | |
| 	u16 unlockend_blkaddr3;
 | |
| #elif defined(MXC_NFC_V3_2)
 | |
| 	u32 flash_cmd;
 | |
| 	u32 flash_addr[12];
 | |
| 	u32 config1;
 | |
| 	u32 ecc_status_result;
 | |
| 	u32 status_sum;
 | |
| 	u32 launch;
 | |
| #endif
 | |
| };
 | |
| 
 | |
| #ifdef MXC_NFC_V3_2
 | |
| struct mxc_nand_ip_regs {
 | |
| 	u32 wrprot;
 | |
| 	u32 wrprot_unlock_blkaddr[8];
 | |
| 	u32 config2;
 | |
| 	u32 config3;
 | |
| 	u32 ipc;
 | |
| 	u32 err_addr;
 | |
| 	u32 delay_line;
 | |
| };
 | |
| #endif
 | |
| 
 | |
| /* Set FCMD to 1, rest to 0 for Command operation */
 | |
| #define NFC_CMD				0x1
 | |
| 
 | |
| /* Set FADD to 1, rest to 0 for Address operation */
 | |
| #define NFC_ADDR			0x2
 | |
| 
 | |
| /* Set FDI to 1, rest to 0 for Input operation */
 | |
| #define NFC_INPUT			0x4
 | |
| 
 | |
| /* Set FDO to 001, rest to 0 for Data Output operation */
 | |
| #define NFC_OUTPUT			0x8
 | |
| 
 | |
| /* Set FDO to 010, rest to 0 for Read ID operation */
 | |
| #define NFC_ID				0x10
 | |
| 
 | |
| /* Set FDO to 100, rest to 0 for Read Status operation */
 | |
| #define NFC_STATUS			0x20
 | |
| 
 | |
| #if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 | |
| #define NFC_CONFIG1_SP_EN		(1 << 2)
 | |
| #define NFC_CONFIG1_RST			(1 << 6)
 | |
| #define NFC_CONFIG1_CE			(1 << 7)
 | |
| #elif defined(MXC_NFC_V3_2)
 | |
| #define NFC_CONFIG1_SP_EN		(1 << 0)
 | |
| #define NFC_CONFIG1_CE			(1 << 1)
 | |
| #define NFC_CONFIG1_RST			(1 << 2)
 | |
| #endif
 | |
| #define NFC_V1_V2_CONFIG1_ECC_EN	(1 << 3)
 | |
| #define NFC_V1_V2_CONFIG1_INT_MSK	(1 << 4)
 | |
| #define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
 | |
| #define NFC_V2_CONFIG1_ECC_MODE_4	(1 << 0)
 | |
| #define NFC_V2_CONFIG1_ONE_CYCLE	(1 << 8)
 | |
| #define NFC_V2_CONFIG1_FP_INT		(1 << 11)
 | |
| #define NFC_V3_CONFIG1_RBA_MASK		(0x7 << 4)
 | |
| #define NFC_V3_CONFIG1_RBA(x)		(((x) & 0x7) << 4)
 | |
| 
 | |
| #define NFC_V1_V2_CONFIG2_INT		(1 << 15)
 | |
| #define NFC_V3_CONFIG2_PS_MASK		(0x3 << 0)
 | |
| #define NFC_V3_CONFIG2_PS_512		(0 << 0)
 | |
| #define NFC_V3_CONFIG2_PS_2048		(1 << 0)
 | |
| #define NFC_V3_CONFIG2_PS_4096		(2 << 0)
 | |
| #define NFC_V3_CONFIG2_ONE_CYCLE	(1 << 2)
 | |
| #define NFC_V3_CONFIG2_ECC_EN		(1 << 3)
 | |
| #define NFC_V3_CONFIG2_2CMD_PHASES	(1 << 4)
 | |
| #define NFC_V3_CONFIG2_NUM_ADDR_PH0	(1 << 5)
 | |
| #define NFC_V3_CONFIG2_ECC_MODE_8	(1 << 6)
 | |
| #define NFC_V3_CONFIG2_PPB_MASK		(0x3 << 7)
 | |
| #define NFC_V3_CONFIG2_PPB(x)		(((x) & 0x3) << 7)
 | |
| #define NFC_V3_CONFIG2_EDC_MASK		(0x7 << 9)
 | |
| #define NFC_V3_CONFIG2_EDC(x)		(((x) & 0x7) << 9)
 | |
| #define NFC_V3_CONFIG2_NUM_ADDR_PH1(x)	(((x) & 0x3) << 12)
 | |
| #define NFC_V3_CONFIG2_INT_MSK		(1 << 15)
 | |
| #define NFC_V3_CONFIG2_SPAS_MASK	(0xff << 16)
 | |
| #define NFC_V3_CONFIG2_SPAS(x)		(((x) & 0xff) << 16)
 | |
| #define NFC_V3_CONFIG2_ST_CMD_MASK	(0xff << 24)
 | |
| #define NFC_V3_CONFIG2_ST_CMD(x)	(((x) & 0xff) << 24)
 | |
| 
 | |
| #define NFC_V3_CONFIG3_ADD_OP(x)	(((x) & 0x3) << 0)
 | |
| #define NFC_V3_CONFIG3_FW8		(1 << 3)
 | |
| #define NFC_V3_CONFIG3_SBB(x)		(((x) & 0x7) << 8)
 | |
| #define NFC_V3_CONFIG3_NUM_OF_DEVS(x)	(((x) & 0x7) << 12)
 | |
| #define NFC_V3_CONFIG3_RBB_MODE		(1 << 15)
 | |
| #define NFC_V3_CONFIG3_NO_SDMA		(1 << 20)
 | |
| 
 | |
| #define NFC_V3_WRPROT_UNLOCK		(1 << 2)
 | |
| #define NFC_V3_WRPROT_BLS_UNLOCK	(2 << 6)
 | |
| 
 | |
| #define NFC_V3_IPC_CREQ			(1 << 0)
 | |
| #define NFC_V3_IPC_INT			(1 << 31)
 | |
| 
 | |
| #if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 | |
| #define operation	config2
 | |
| #define readnfc		readw
 | |
| #define writenfc	writew
 | |
| #elif defined(MXC_NFC_V3_2)
 | |
| #define operation	launch
 | |
| #define readnfc		readl
 | |
| #define writenfc	writel
 | |
| #endif
 | |
| 
 | |
| #endif /* __MXC_NAND_H */
 | 
