350 lines
8.3 KiB
ArmAsm
350 lines
8.3 KiB
ArmAsm
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include "hardware.h"
|
|
|
|
/*
|
|
* ==================== low level suspend ====================
|
|
*
|
|
* Better to follow below rules to use ARM registers:
|
|
* r0: pm_info structure address;
|
|
* r1 ~ r4: for saving pm_info members;
|
|
* r5 ~ r10: free registers;
|
|
* r11: io base address.
|
|
*
|
|
* suspend ocram space layout:
|
|
* ======================== high address ======================
|
|
* .
|
|
* .
|
|
* .
|
|
* ^
|
|
* ^
|
|
* ^
|
|
* imx6_suspend code
|
|
* PM_INFO structure(imx6_cpu_pm_info)
|
|
* ======================== low address =======================
|
|
*/
|
|
|
|
/*
|
|
* Below offsets are based on struct imx6_cpu_pm_info
|
|
* which defined in arch/arm/mach-imx/pm-imx6q.c, this
|
|
* structure contains necessary pm info for low level
|
|
* suspend related code.
|
|
*/
|
|
#define PM_INFO_PBASE_OFFSET 0x0
|
|
#define PM_INFO_RESUME_ADDR_OFFSET 0x4
|
|
#define PM_INFO_DDR_TYPE_OFFSET 0x8
|
|
#define PM_INFO_PM_INFO_SIZE_OFFSET 0xC
|
|
#define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10
|
|
#define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14
|
|
#define PM_INFO_MX6Q_SRC_P_OFFSET 0x18
|
|
#define PM_INFO_MX6Q_SRC_V_OFFSET 0x1C
|
|
#define PM_INFO_MX6Q_IOMUXC_P_OFFSET 0x20
|
|
#define PM_INFO_MX6Q_IOMUXC_V_OFFSET 0x24
|
|
#define PM_INFO_MX6Q_CCM_P_OFFSET 0x28
|
|
#define PM_INFO_MX6Q_CCM_V_OFFSET 0x2C
|
|
#define PM_INFO_MX6Q_GPC_P_OFFSET 0x30
|
|
#define PM_INFO_MX6Q_GPC_V_OFFSET 0x34
|
|
#define PM_INFO_MX6Q_L2_P_OFFSET 0x38
|
|
#define PM_INFO_MX6Q_L2_V_OFFSET 0x3C
|
|
#define PM_INFO_MMDC_IO_NUM_OFFSET 0x40
|
|
#define PM_INFO_MMDC_IO_VAL_OFFSET 0x44
|
|
|
|
#define MX6Q_SRC_GPR1 0x20
|
|
#define MX6Q_SRC_GPR2 0x24
|
|
#define MX6Q_MMDC_MAPSR 0x404
|
|
#define MX6Q_MMDC_MPDGCTRL0 0x83c
|
|
#define MX6Q_GPC_IMR1 0x08
|
|
#define MX6Q_GPC_IMR2 0x0c
|
|
#define MX6Q_GPC_IMR3 0x10
|
|
#define MX6Q_GPC_IMR4 0x14
|
|
#define MX6Q_CCM_CCR 0x0
|
|
|
|
.align 3
|
|
|
|
.macro sync_l2_cache
|
|
|
|
/* sync L2 cache to drain L2's buffers to DRAM. */
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
ldr r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET]
|
|
teq r11, #0
|
|
beq 6f
|
|
mov r6, #0x0
|
|
str r6, [r11, #L2X0_CACHE_SYNC]
|
|
1:
|
|
ldr r6, [r11, #L2X0_CACHE_SYNC]
|
|
ands r6, r6, #0x1
|
|
bne 1b
|
|
6:
|
|
#endif
|
|
|
|
.endm
|
|
|
|
.macro resume_mmdc
|
|
|
|
/* restore MMDC IO */
|
|
cmp r5, #0x0
|
|
ldreq r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
|
|
ldrne r11, [r0, #PM_INFO_MX6Q_IOMUXC_P_OFFSET]
|
|
|
|
ldr r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
|
|
ldr r7, =PM_INFO_MMDC_IO_VAL_OFFSET
|
|
add r7, r7, r0
|
|
1:
|
|
ldr r8, [r7], #0x4
|
|
ldr r9, [r7], #0x4
|
|
str r9, [r11, r8]
|
|
subs r6, r6, #0x1
|
|
bne 1b
|
|
|
|
cmp r5, #0x0
|
|
ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
|
|
ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
|
|
|
|
cmp r3, #IMX_DDR_TYPE_LPDDR2
|
|
bne 4f
|
|
|
|
/* reset read FIFO, RST_RD_FIFO */
|
|
ldr r7, =MX6Q_MMDC_MPDGCTRL0
|
|
ldr r6, [r11, r7]
|
|
orr r6, r6, #(1 << 31)
|
|
str r6, [r11, r7]
|
|
2:
|
|
ldr r6, [r11, r7]
|
|
ands r6, r6, #(1 << 31)
|
|
bne 2b
|
|
|
|
/* reset FIFO a second time */
|
|
ldr r6, [r11, r7]
|
|
orr r6, r6, #(1 << 31)
|
|
str r6, [r11, r7]
|
|
3:
|
|
ldr r6, [r11, r7]
|
|
ands r6, r6, #(1 << 31)
|
|
bne 3b
|
|
4:
|
|
/* let DDR out of self-refresh */
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
bic r7, r7, #(1 << 21)
|
|
str r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
5:
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
ands r7, r7, #(1 << 25)
|
|
bne 5b
|
|
|
|
/* enable DDR auto power saving */
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
bic r7, r7, #0x1
|
|
str r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
|
|
.endm
|
|
|
|
ENTRY(imx6_suspend)
|
|
ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
|
|
ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
|
|
ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
|
|
ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
|
|
|
|
/*
|
|
* counting the resume address in iram
|
|
* to set it in SRC register.
|
|
*/
|
|
ldr r6, =imx6_suspend
|
|
ldr r7, =resume
|
|
sub r7, r7, r6
|
|
add r8, r1, r4
|
|
add r9, r8, r7
|
|
|
|
/*
|
|
* make sure TLB contain the addr we want,
|
|
* as we will access them after MMDC IO floated.
|
|
*/
|
|
|
|
ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET]
|
|
ldr r6, [r11, #0x0]
|
|
ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
|
|
ldr r6, [r11, #0x0]
|
|
ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
|
|
ldr r6, [r11, #0x0]
|
|
|
|
/* use r11 to store the IO address */
|
|
ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET]
|
|
/* store physical resume addr and pm_info address. */
|
|
str r9, [r11, #MX6Q_SRC_GPR1]
|
|
str r1, [r11, #MX6Q_SRC_GPR2]
|
|
|
|
/* need to sync L2 cache before DSM. */
|
|
sync_l2_cache
|
|
|
|
ldr r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
|
|
/*
|
|
* put DDR explicitly into self-refresh and
|
|
* disable automatic power savings.
|
|
*/
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
orr r7, r7, #0x1
|
|
str r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
|
|
/* make the DDR explicitly enter self-refresh. */
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
orr r7, r7, #(1 << 21)
|
|
str r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
|
|
poll_dvfs_set:
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
ands r7, r7, #(1 << 25)
|
|
beq poll_dvfs_set
|
|
|
|
ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
|
|
ldr r6, =0x0
|
|
ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
|
|
ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET
|
|
add r8, r8, r0
|
|
/* LPDDR2's last 3 IOs need special setting */
|
|
cmp r3, #IMX_DDR_TYPE_LPDDR2
|
|
subeq r7, r7, #0x3
|
|
set_mmdc_io_lpm:
|
|
ldr r9, [r8], #0x8
|
|
str r6, [r11, r9]
|
|
subs r7, r7, #0x1
|
|
bne set_mmdc_io_lpm
|
|
|
|
cmp r3, #IMX_DDR_TYPE_LPDDR2
|
|
bne set_mmdc_io_lpm_done
|
|
ldr r6, =0x1000
|
|
ldr r9, [r8], #0x8
|
|
str r6, [r11, r9]
|
|
ldr r9, [r8], #0x8
|
|
str r6, [r11, r9]
|
|
ldr r6, =0x80000
|
|
ldr r9, [r8]
|
|
str r6, [r11, r9]
|
|
set_mmdc_io_lpm_done:
|
|
|
|
/*
|
|
* mask all GPC interrupts before
|
|
* enabling the RBC counters to
|
|
* avoid the counter starting too
|
|
* early if an interupt is already
|
|
* pending.
|
|
*/
|
|
ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
|
|
ldr r6, [r11, #MX6Q_GPC_IMR1]
|
|
ldr r7, [r11, #MX6Q_GPC_IMR2]
|
|
ldr r8, [r11, #MX6Q_GPC_IMR3]
|
|
ldr r9, [r11, #MX6Q_GPC_IMR4]
|
|
|
|
ldr r10, =0xffffffff
|
|
str r10, [r11, #MX6Q_GPC_IMR1]
|
|
str r10, [r11, #MX6Q_GPC_IMR2]
|
|
str r10, [r11, #MX6Q_GPC_IMR3]
|
|
str r10, [r11, #MX6Q_GPC_IMR4]
|
|
|
|
/*
|
|
* enable the RBC bypass counter here
|
|
* to hold off the interrupts. RBC counter
|
|
* = 32 (1ms), Minimum RBC delay should be
|
|
* 400us for the analog LDOs to power down.
|
|
*/
|
|
ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET]
|
|
ldr r10, [r11, #MX6Q_CCM_CCR]
|
|
bic r10, r10, #(0x3f << 21)
|
|
orr r10, r10, #(0x20 << 21)
|
|
str r10, [r11, #MX6Q_CCM_CCR]
|
|
|
|
/* enable the counter. */
|
|
ldr r10, [r11, #MX6Q_CCM_CCR]
|
|
orr r10, r10, #(0x1 << 27)
|
|
str r10, [r11, #MX6Q_CCM_CCR]
|
|
|
|
/* unmask all the GPC interrupts. */
|
|
ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
|
|
str r6, [r11, #MX6Q_GPC_IMR1]
|
|
str r7, [r11, #MX6Q_GPC_IMR2]
|
|
str r8, [r11, #MX6Q_GPC_IMR3]
|
|
str r9, [r11, #MX6Q_GPC_IMR4]
|
|
|
|
/*
|
|
* now delay for a short while (3usec)
|
|
* ARM is at 1GHz at this point
|
|
* so a short loop should be enough.
|
|
* this delay is required to ensure that
|
|
* the RBC counter can start counting in
|
|
* case an interrupt is already pending
|
|
* or in case an interrupt arrives just
|
|
* as ARM is about to assert DSM_request.
|
|
*/
|
|
ldr r6, =2000
|
|
rbc_loop:
|
|
subs r6, r6, #0x1
|
|
bne rbc_loop
|
|
|
|
/* Zzz, enter stop mode */
|
|
wfi
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
/*
|
|
* run to here means there is pending
|
|
* wakeup source, system should auto
|
|
* resume, we need to restore MMDC IO first
|
|
*/
|
|
mov r5, #0x0
|
|
resume_mmdc
|
|
|
|
/* return to suspend finish */
|
|
ret lr
|
|
|
|
resume:
|
|
/* invalidate L1 I-cache first */
|
|
mov r6, #0x0
|
|
mcr p15, 0, r6, c7, c5, 0
|
|
mcr p15, 0, r6, c7, c5, 6
|
|
/* enable the Icache and branch prediction */
|
|
mov r6, #0x1800
|
|
mcr p15, 0, r6, c1, c0, 0
|
|
isb
|
|
|
|
/* get physical resume address from pm_info. */
|
|
ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
|
|
/* clear core0's entry and parameter */
|
|
ldr r11, [r0, #PM_INFO_MX6Q_SRC_P_OFFSET]
|
|
mov r7, #0x0
|
|
str r7, [r11, #MX6Q_SRC_GPR1]
|
|
str r7, [r11, #MX6Q_SRC_GPR2]
|
|
|
|
ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
|
|
mov r5, #0x1
|
|
resume_mmdc
|
|
|
|
ret lr
|
|
ENDPROC(imx6_suspend)
|
|
|
|
/*
|
|
* The following code must assume it is running from physical address
|
|
* where absolute virtual addresses to the data section have to be
|
|
* turned into relative ones.
|
|
*/
|
|
|
|
ENTRY(v7_cpu_resume)
|
|
bl v7_invalidate_l1
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
bl l2c310_early_resume
|
|
#endif
|
|
b cpu_resume
|
|
ENDPROC(v7_cpu_resume)
|