205 lines
6.4 KiB
Plaintext
205 lines
6.4 KiB
Plaintext
* Clock Block on Freescale QorIQ Platforms
|
|
|
|
Freescale QorIQ chips take primary clocking input from the external
|
|
SYSCLK signal. The SYSCLK input (frequency) is multiplied using
|
|
multiple phase locked loops (PLL) to create a variety of frequencies
|
|
which can then be passed to a variety of internal logic, including
|
|
cores and peripheral IP blocks.
|
|
Please refer to the Reference Manual for details.
|
|
|
|
All references to "1.0" and "2.0" refer to the QorIQ chassis version to
|
|
which the chip complies.
|
|
|
|
Chassis Version Example Chips
|
|
--------------- -------------
|
|
1.0 p4080, p5020, p5040
|
|
2.0 t4240, b4860
|
|
|
|
1. Clock Block Binding
|
|
|
|
Required properties:
|
|
- compatible: Should contain a chip-specific clock block compatible
|
|
string and (if applicable) may contain a chassis-version clock
|
|
compatible string.
|
|
|
|
Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
|
|
* "fsl,p2041-clockgen"
|
|
* "fsl,p3041-clockgen"
|
|
* "fsl,p4080-clockgen"
|
|
* "fsl,p5020-clockgen"
|
|
* "fsl,p5040-clockgen"
|
|
* "fsl,t4240-clockgen"
|
|
* "fsl,b4420-clockgen"
|
|
* "fsl,b4860-clockgen"
|
|
* "fsl,ls1012a-clockgen"
|
|
* "fsl,ls1021a-clockgen"
|
|
* "fsl,ls1043a-clockgen"
|
|
* "fsl,ls1046a-clockgen"
|
|
* "fsl,ls1088a-clockgen"
|
|
* "fsl,ls2080a-clockgen"
|
|
Chassis-version clock strings include:
|
|
* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
|
|
* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
|
|
- reg: Describes the address of the device's resources within the
|
|
address space defined by its parent bus, and resource zero
|
|
represents the clock register set
|
|
|
|
Optional properties:
|
|
- ranges: Allows valid translation between child's address space and
|
|
parent's. Must be present if the device has sub-nodes.
|
|
- #address-cells: Specifies the number of cells used to represent
|
|
physical base addresses. Must be present if the device has
|
|
sub-nodes and set to 1 if present
|
|
- #size-cells: Specifies the number of cells used to represent
|
|
the size of an address. Must be present if the device has
|
|
sub-nodes and set to 1 if present
|
|
- clock-frequency: Input system clock frequency (SYSCLK)
|
|
- clocks: If clock-frequency is not specified, sysclk may be provided
|
|
as an input clock. Either clock-frequency or clocks must be
|
|
provided.
|
|
A second input clock, called "coreclk", may be provided if
|
|
core PLLs are based on a different input clock from the
|
|
platform PLL.
|
|
- clock-names: Required if a coreclk is present. Valid names are
|
|
"sysclk" and "coreclk".
|
|
|
|
2. Clock Provider
|
|
|
|
The clockgen node should act as a clock provider, though in older device
|
|
trees the children of the clockgen node are the clock providers.
|
|
|
|
When the clockgen node is a clock provider, #clock-cells = <2>.
|
|
The first cell of the clock specifier is the clock type, and the
|
|
second cell is the clock index for the specified type.
|
|
|
|
Type# Name Index Cell
|
|
0 sysclk must be 0
|
|
1 cmux index (n in CLKCnCSR)
|
|
2 hwaccel index (n in CLKCGnHWACSR)
|
|
3 fman 0 for fm1, 1 for fm2
|
|
4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4
|
|
4=pll/5, 5=pll/6, 6=pll/7, 7=pll/8
|
|
5 coreclk must be 0
|
|
|
|
3. Example
|
|
|
|
clockgen: global-utilities@e1000 {
|
|
compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
|
|
clock-frequency = <133333333>;
|
|
reg = <0xe1000 0x1000>;
|
|
#clock-cells = <2>;
|
|
};
|
|
|
|
fman@400000 {
|
|
...
|
|
clocks = <&clockgen 3 0>;
|
|
...
|
|
};
|
|
}
|
|
4. Legacy Child Nodes
|
|
|
|
NOTE: These nodes are deprecated. Kernels should continue to support
|
|
device trees with these nodes, but new device trees should not use them.
|
|
|
|
Most of the bindings are from the common clock binding[1].
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Required properties:
|
|
- compatible : Should include one of the following:
|
|
* "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
|
|
* "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
|
|
* "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
|
|
* "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
|
|
* "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
|
|
It takes parent's clock-frequency as its clock.
|
|
* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
|
|
It takes parent's clock-frequency as its clock.
|
|
* "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
|
|
* "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
|
|
- #clock-cells: From common clock binding. The number of cells in a
|
|
clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
|
|
clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
|
|
For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
|
|
clock-specifier cell may take the following values:
|
|
* 0 - equal to the PLL frequency
|
|
* 1 - equal to the PLL frequency divided by 2
|
|
* 2 - equal to the PLL frequency divided by 4
|
|
|
|
Recommended properties:
|
|
- clocks: Should be the phandle of input parent clock
|
|
- clock-names: From common clock binding, indicates the clock name
|
|
- clock-output-names: From common clock binding, indicates the names of
|
|
output clocks
|
|
- reg: Should be the offset and length of clock block base address.
|
|
The length should be 4.
|
|
|
|
Legacy Example:
|
|
/ {
|
|
clockgen: global-utilities@e1000 {
|
|
compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
|
|
ranges = <0x0 0xe1000 0x1000>;
|
|
clock-frequency = <133333333>;
|
|
reg = <0xe1000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
sysclk: sysclk {
|
|
#clock-cells = <0>;
|
|
compatible = "fsl,qoriq-sysclk-1.0";
|
|
clock-output-names = "sysclk";
|
|
};
|
|
|
|
pll0: pll0@800 {
|
|
#clock-cells = <1>;
|
|
reg = <0x800 0x4>;
|
|
compatible = "fsl,qoriq-core-pll-1.0";
|
|
clocks = <&sysclk>;
|
|
clock-output-names = "pll0", "pll0-div2";
|
|
};
|
|
|
|
pll1: pll1@820 {
|
|
#clock-cells = <1>;
|
|
reg = <0x820 0x4>;
|
|
compatible = "fsl,qoriq-core-pll-1.0";
|
|
clocks = <&sysclk>;
|
|
clock-output-names = "pll1", "pll1-div2";
|
|
};
|
|
|
|
mux0: mux0@0 {
|
|
#clock-cells = <0>;
|
|
reg = <0x0 0x4>;
|
|
compatible = "fsl,qoriq-core-mux-1.0";
|
|
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
|
|
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
|
|
clock-output-names = "cmux0";
|
|
};
|
|
|
|
mux1: mux1@20 {
|
|
#clock-cells = <0>;
|
|
reg = <0x20 0x4>;
|
|
compatible = "fsl,qoriq-core-mux-1.0";
|
|
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
|
|
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
|
|
clock-output-names = "cmux1";
|
|
};
|
|
|
|
platform-pll: platform-pll@c00 {
|
|
#clock-cells = <1>;
|
|
reg = <0xc00 0x4>;
|
|
compatible = "fsl,qoriq-platform-pll-1.0";
|
|
clocks = <&sysclk>;
|
|
clock-output-names = "platform-pll", "platform-pll-div2";
|
|
};
|
|
};
|
|
};
|
|
|
|
Example for legacy clock consumer:
|
|
|
|
/ {
|
|
cpu0: PowerPC,e5500@0 {
|
|
...
|
|
clocks = <&mux0>;
|
|
...
|
|
};
|
|
};
|