/**
    Copyright   Novatek Microelectronics Corp. 2020.  All rights reserved.

    @file       PrjCfg_Default.h
    @ingroup

    @brief

    @note       This config genernate default config where isn't set in PrjCfg_MODEL.h
*/

#ifndef _PRJCFG_DEFAULT_H_
#define _PRJCFG_DEFAULT_H_

#ifndef VOICE_MODE
#define VOICE_MODE						DISABLE
#endif

#ifndef MOVIE_DIRECT_FUNC
#define MOVIE_DIRECT_FUNC				DISABLE
#endif

#ifndef PHOTO_DIRECT_FUNC
#define PHOTO_DIRECT_FUNC				DISABLE
#endif

#ifndef PHOTO_PREVIEW_SLICE_ENC_FUNC
#define PHOTO_PREVIEW_SLICE_ENC_FUNC	DISABLE
#endif

#if (PHOTO_DIRECT_FUNC == ENABLE)
#if (PHOTO_PREVIEW_SLICE_ENC_FUNC == DISABLE)
#undef PHOTO_PREVIEW_SLICE_ENC_FUNC
#define PHOTO_PREVIEW_SLICE_ENC_FUNC	  ENABLE
#endif
#endif

#if (PHOTO_PREVIEW_SLICE_ENC_FUNC == ENABLE)
#if (PHOTO_DIRECT_FUNC == DISABLE)
#undef PHOTO_DIRECT_FUNC
#define PHOTO_DIRECT_FUNC	  ENABLE
#endif
#endif

#ifndef ETH_REARCAM_CAPS_COUNT
#define ETH_REARCAM_CAPS_COUNT			0
#endif

#ifndef ETH_REARCAM_CLONE_FOR_DISPLAY
#define ETH_REARCAM_CLONE_FOR_DISPLAY	DISABLE
#endif

#ifndef ETH_REARCAM_TX_IQTOOL
#define ETH_REARCAM_TX_IQTOOL				DISABLE
#endif

#ifndef ETHCAM_EIS
#define ETHCAM_EIS  DISABLE
#endif

#ifndef WATERLOGO_FUNCTION
#define WATERLOGO_FUNCTION              DISABLE  // Enable/Disable waterlogo function
#endif

#ifndef MOVIE_DATESTAMP_FUNC
#define MOVIE_DATESTAMP_FUNC 	ENABLE
#endif

#ifndef MOVIE_MULTISTAMP_FUNC
#define MOVIE_MULTISTAMP_FUNC 	DISABLE
#endif

#ifndef MOVIE_MULTIWATERLOGO_FUNC
#define MOVIE_MULTIWATERLOGO_FUNC 	DISABLE
#endif

#if (SENSOR_CAPS_COUNT == 1)
#if (!defined(_SENSOR1_sen_off_))
#define SENSOR_ON_MASK					(SENSOR_1)
#elif (!defined(_SENSOR2_sen_off_))
#define SENSOR_ON_MASK					(SENSOR_2)
#else
#define SENSOR_ON_MASK					(0)
#endif
#elif (SENSOR_CAPS_COUNT == 2)
#if (!defined(_SENSOR1_sen_off_) && !defined(_SENSOR2_sen_off_))
#define SENSOR_ON_MASK					(SENSOR_1|SENSOR_2)
#else
#define SENSOR_ON_MASK					(0)
#endif
#elif (SENSOR_CAPS_COUNT == 3)
#if (!defined(_SENSOR1_sen_off_) && !defined(_SENSOR2_sen_off_) && !defined(_SENSOR3_sen_off_))
#define SENSOR_ON_MASK					(SENSOR_1|SENSOR_2|SENSOR_3)
#else
#define SENSOR_ON_MASK					(0)
#endif
#else
#define SENSOR_ON_MASK					(0)
#endif

#ifndef MOVIE_DIS
#define MOVIE_DIS						DISABLE
#endif

#ifndef MOVIE_DIS_RATIO
#define MOVIE_DIS_RATIO					1100
#endif

#ifndef SENSOR_SIEPATGEN
#define SENSOR_SIEPATGEN				DISABLE
#endif
#ifndef LOGFILE_FUNC
#define LOGFILE_FUNC					DISABLE
#endif

#ifndef USER_PACK_UPDATE
#define USER_PACK_UPDATE				DISABLE
#endif

#ifndef WAV_PLAY_FUNC
#define WAV_PLAY_FUNC					DISABLE
#endif

#ifndef MOVIE_IME_CROP
#define MOVIE_IME_CROP					DISABLE
#endif

#ifndef PHOTO_IME_CROP
#define PHOTO_IME_CROP					DISABLE
#endif

#ifndef PLAY_FULL_DISP
#define PLAY_FULL_DISP					DISABLE
#endif

#ifndef PHOTO_MODE_CAP_YUV420_FUNC
#define PHOTO_MODE_CAP_YUV420_FUNC		ENABLE
#endif

#ifndef PLAY_THUMB_AND_MOVIE
#define PLAY_THUMB_AND_MOVIE			DISABLE
#endif

#ifndef DRAM_SIZE_64MB_DISP_OFF
#define DRAM_SIZE_64MB_DISP_OFF			DISABLE
#endif

#ifndef DZOOM_FUNC
#define DZOOM_FUNC			DISABLE
#endif

#ifndef ANR_FUNC
#define ANR_FUNC						ENABLE
#endif

#ifndef USER_SPI_NOR_TABLE
#define USER_SPI_NOR_TABLE				DISABLE
#endif

#ifndef USB_CDC_DBG
#define USB_CDC_DBG						DISABLE
#endif

// boot
#ifndef POWERON_FAST_BOOT
#define POWERON_FAST_BOOT      ENABLE    ///< enable to use multi-thread init
#endif

#ifndef POWERON_FAST_BOOT_MSG
#define POWERON_FAST_BOOT_MSG  ENABLE   ///< disable boot msg for fast boot, but hard to debug
#endif

#ifndef POWERON_BOOT_REPORT
#define POWERON_BOOT_REPORT    DISABLE    ///< enable to show report after booting
#endif

#ifndef POWERON_EXAM_FLASH_LOAD
#define POWERON_EXAM_FLASH_LOAD DISABLE  ///< exam load 16MB data from flash
#endif

#ifndef MOVIE_YUV_COMPRESS
#define MOVIE_YUV_COMPRESS  DISABLE
#endif

/*******************************************************************************************
 * HUNTING Default Begin
 ******************************************************************************************/
#ifndef HUNTING_CAMERA_MODEL
	#define HUNTING_CAMERA_MODEL				DISABLE
#endif

#ifndef HUNTING_CAMERA_USE_DCF
	#define HUNTING_CAMERA_USE_DCF				DISABLE
#endif
#ifndef HUNTING_CAMERA_SYS_PARTITION_NAME
	#define HUNTING_CAMERA_SYS_PARTITION_NAME	sys
#endif

/*******************************************************************************************
 * HUNTING Default End
 ******************************************************************************************/


#ifndef ALG_FUNC_AI2
#define ALG_FUNC_AI2          DISABLE
#endif

//#NT#20220503#Philex lin -begin
// power saving marco
#ifndef USB_POWER_DISABLE
#define USB_POWER_DISABLE          DISABLE
#endif

#ifndef ETH_POWER_DISABLE
#if (defined(_NVT_ETHREARCAM_TX_)||defined(_NVT_ETHREARCAM_RX_))
#define ETH_POWER_DISABLE         DISABLE
#else
#define ETH_POWER_DISABLE         ENABLE
#endif
#endif

#ifndef GDC_POWER_DISABLE
#define GDC_POWER_DISABLE         ENABLE
#endif
//#NT#20220503#Philex lin -end

// seletc boot mode
#define POWERON_MODE_NONE 0
#define POWERON_MODE_PREVIEW 1    ///< fast preview
#define POWERON_MODE_ENCODE 2     ///< fast encode
#define POWERON_MODE_BOOT_LINUX 3 ///< fast boot linux (only for cfg_RTOS_BOOT_LINUX_EVB)

#define POWERON_MODE		   POWERON_MODE_PREVIEW

#ifndef POWERON_FAST_SLICE_ENC
#define POWERON_FAST_SLICE_ENC  DISABLE
#endif

#ifndef HUNTING_CAMERA_BOOT_LINUX
#define HUNTING_CAMERA_BOOT_LINUX DISABLE
#endif

#ifndef POWERON_FAST_SLICE_ENC_VER2
#define POWERON_FAST_SLICE_ENC_VER2 DISABLE
#endif

#ifndef DCF_DIR_NAME
#define DCF_DIR_NAME					"HUNTI"   /* 100HUNTI */
#endif

#ifndef DCF_FILE_NAME
#define DCF_FILE_NAME					"IMAG"    /* IMAG0001.JPG */
#endif

#ifndef HUNTING_MCU_I2C
#define HUNTING_MCU_I2C				    DISABLE
#endif

#ifndef HUNTING_MCU_UART
#define HUNTING_MCU_UART				ENABLE
#endif

#ifndef HUNTING_IR_LED_940
#define HUNTING_IR_LED_940				ENABLE//DISABLE
#endif

#ifndef SF_BASE_VERSION
#define SF_BASE_VERSION				"7MD4RCwD3T2"
#endif

#ifndef HUNTING_PHOTO_FAST_AE_60_FPS
#define HUNTING_PHOTO_FAST_AE_60_FPS   DISABLE
#endif

#ifndef SF_EXIF_MN_BUF_SIZE
#define SF_EXIF_MN_BUF_SIZE		256
#endif

#ifndef HW_S530
#define HW_S530 0
#endif


#endif //_PRJCFG_DEFAULT_H_